Karen Pantleon

Karen Pantleon

Associate Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 112

2800 Kgs. Lyngby

Ph.
Fax +45 45 93 62 13
E-mail kpa@mek.dtu.dk
Home page

Request a vCard via e-mail.

Publications
Projects
Loading

Publications rss feed

2014
 

Evolution of compressive strains in retained austenite during sub-zero Celsius martensite formation and tempering

Villa, Matteo ; Pantleon, Karen ; Somers, Marcel A. J.
in journal: Acta Materialia (ISSN: 1359-6454) (DOI: http://dx.doi.org/10.1016/j.actamat.2013.11.007), vol: 65, pages: 383-392, 2014

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2014     |    DOI: http://dx.doi.org/10.1016/j.actamat.2013.11.007

2013
 

In situ investigation of the martensitic transformation in Fe–12 wt.%Ni–0.6 wt.%C steel at subzero temperatures

Villa, Matteo ; Pantleon, Karen ; Somers, Marcel A. J.
in journal: Journal of Alloys and Compounds (ISSN: 0925-8388) (DOI: http://dx.doi.org/10.1016/j.jallcom.2011.12.162), vol: 577, issue: Supplement 1, pages: S543-S548, 2013

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: http://dx.doi.org/10.1016/j.jallcom.2011.12.162

 

The complementary use of electron backscatter diffraction and ion channelling imaging for the characterization of nanotwins

Alimadadi, Hossein ; da Silva Fanta, Alice Bastos ; Pantleon, Karen
in journal: Journal of Microscopy (ISSN: 0022-2720) (DOI: http://dx.doi.org/10.1111/j.1365-2818.2012.03690.x), vol: 249, issue: 2, pages: 111-118, 2013

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: http://dx.doi.org/10.1111/j.1365-2818.2012.03690.x

  PDF

Grain Boundary Engineering of Electrodeposited Thin Films

Alimadadi, Hossein ; Somers, Marcel A. J. (Supervisor) ; Pantleon, Karen (Main supervisor)
Technical University of Denmark, pages: 275

Type: Ph.D. thesis

Status: Published     |    Year: 2013

  PDF

Enhanced carbide precipitation during tempering of sub-zero Celsius treated AISI 52100 bearing steel

Villa, Matteo ; Pantleon, Karen ; Somers, Marcel A. J.
Presented at:
Heat Treat & Surface Engineering Conference & Expo 2013, Chennai

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2013

  PDF

Columns formed by multiple twinning in nickel layers—An approach of grain boundary engineering by electrodeposition

Alimadadi, Hossein ; da Silva Fanta, Alice Bastos ; Somers, Marcel A. J. ; Pantleon, Karen
in journal: Applied Physics Letters (ISSN: 0003-6951) (DOI: http://dx.doi.org/10.1063/1.4816257), vol: 103, issue: 3, 2013

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: http://dx.doi.org/10.1063/1.4816257

 

Partial transformation of austenite in Al-Mn-Si TRIP steel upon tensile straining: an in situ EBSD study

Lomholt, Trine Nybo ; Adachi, Y. ; da Silva Fanta, Alice Bastos ; Pantleon, Karen ; Somers, Marcel A. J.
in journal: Materials Science and Technology (ISSN: 0267-0836) (DOI: http://dx.doi.org/10.1179/1743284713Y.0000000292), vol: 29, issue: 11, pages: 1383-1388, 2013

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: http://dx.doi.org/10.1179/1743284713Y.0000000292

  PDF

In-situ investigation of martensite formation in AISI 52100 bearing steel at sub-zero Celsius temperature

Villa, Matteo ; Hansen, Mikkel Fougt ; Pantleon, Karen ; Somers, Marcel A. J.
part of: Proceedings of the 2nd Mediterranean Conference on Heat Treatment and Surface Engineering, 2013, Croatian Society for Heat Treatment and Surface Engineering,
Presented at:
2nd Mediterranean Conference on Heat Treatment and Surface Engineering, Dubrovnik

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

2012
 

Microstructure characterization of Friction Stir Spot Welded TRIP steel

Lomholt, Trine Nybo ; Adachi, Yoshitaka ; Peterson, Jeremy ; Steel, Russell ; Pantleon, Karen ; Somers, Marcel A. J.
in journal: Advanced Materials Research (ISSN: 1022-6680) (DOI: http://dx.doi.org/10.4028/www.scientific.net/AMR.409.275), vol: 409, issue: 275-280, pages: 275-280, 2012
Presented at:
7th International Conference on Processing and Manufacturing of Advanced Materials : THERMEC 2011 Supplement, Quebec City, QC

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2012     |    DOI: http://dx.doi.org/10.4028/www.scientific.net/AMR.409.275