Guido Tosello

Guido Tosello

Associate Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 323B

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 19 61
E-mail guto@mek.dtu.dk
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2017
 

Flow visualization and simulation of the filling process during injection molding

Guerrier, Patrick ; Tosello, Guido ; Hattel, Jesper Henri
in journal: C I R P - Journal of Manufacturing Science and Technology (ISSN: 1755-5817) (DOI: http://dx.doi.org/10.1016/j.cirpj.2016.08.002), vol: 16, pages: 12–20, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.cirpj.2016.08.002

  PDF

Moulded Pulp Manufacturing: Overview and Prospects for the Process Technology

Didone, Mattia ; Saxena, Prateek ; Meijer, Ellen Brilhuis ; Tosello, Guido ; Bissacco, Giuliano ; McAloone, Tim C. ; Pigosso, Daniela Cristina Antelmi ; Howard, Thomas J.
in journal: Packaging Technology and Science (ISSN: 0894-3214) (DOI: http://dx.doi.org/10.1002/pts.2289), vol: 30, issue: 6, pages: 231-249, 2017

Type: Review (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1002/pts.2289

  PDF

Investigation on the micro injection molding process of an overmolded multi-material micro component

Baruffi, Federico ; Calaon, Matteo ; Tosello, Guido ; Elsborg, R.
part of: Proceedings of the 2017 World Congress on Micro and Nano Manufacturing, 2017,
Presented at:
2017 World Congress on Micro and Nano Manufacturing (WCMNM 2017),, 2017, Kaohsiung

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

Rheology of high melt strength polypropylene for additive manufacturing

Jagenteufel, Ralf ; Hofstätter, Thomas ; Kamleitner, Florian ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
in journal: Advanced Materials Letter (ISSN: 0976-3961) (DOI: http://dx.doi.org/10.5185/amlett.2017.1450), vol: 8, issue: 6, pages: 712-716, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.5185/amlett.2017.1450

  PDF

Applications of Fiber-Reinforced Polymers in Additive Manufacturing

Hofstätter, Thomas ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
in journal: Procedia C I R P (ISSN: 2212-8271) (DOI: http://dx.doi.org/10.1016/j.procir.2017.03.171), vol: 66, pages: 312-316, 2017
Presented at:
1st CIRP Conference On Composite Materials Parts Manufacturing, 2017, Karlsruhe

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.procir.2017.03.171

  PDF

Experimental approach for the uncertainty assessment of 3D complex geometry dimensional measurements using computed tomography at the mm and sub-mm scales

Jiménez, Roberto ; Torralba, Marta ; Yagüe-Fabra, José A. ; Ontiveros, Sinué ; Tosello, Guido
in journal: Sensors (ISSN: 1424-8220) (DOI: http://dx.doi.org/10.3390/s17051137), vol: 17, issue: 5, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.3390/s17051137

 

Replication quality assessment and uncertainty evaluation of a polymer precision injection moulded component

Baruffi, Federico ; Calaon, Matteo ; Tosello, Guido ; Hansen, Hans Nørgaard ; Prantl, Manfred ; Miller, Nathan
part of: Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 495-496, 2017, The European Society for Precision Engineering and Nanotechnology,
Presented at:
17th euspen International Conference & Exhibition, 2017, Hannover

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

 

3D Finite Element Modelling of Drilling Process of Al2024-T3 Alloy with solid tooling and Experimental Validation

Davoudinejad, Ali ; Tosello, Guido
part of: Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, 2017, The European Society for Precision Engineering and Nanotechnology,
Presented at:
17th euspen International Conference & Exhibition, 2017, Hannover

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

 

Finite Element Modeling and Process Performance of Micro End-Milling of Aluminum 6082-T6

Davoudinejad, Ali ; Tosello, Guido ; Annoni, Massimiliano
part of: Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, 2017, The European Society for Precision Engineering and Nanotechnology,
Presented at:
17th euspen International Conference & Exhibition, 2017, Hannover

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

3D Finite Element Simulation of Micro End-Milling by Considering the Effect of Tool Run-Out

Davoudinejad, Ali ; Tosello, Guido ; Parenti, Paolo ; Annoni, Massimiliano
in journal: Micromachines (ISSN: 2072-666X) (DOI: http://dx.doi.org/10.3390/mi8060187), vol: 8, issue: 6, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.3390/mi8060187