Aminul Islam

Aminul Islam

Associate Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Ørsteds Plads

Building 352, room 020

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 19 61
E-mail mais@mek.dtu.dk
ORCID 0000-0002-8275-6631
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2018
 

Characterisation of the Influence of the Colour in Resin for Micro Parts Production by Photopolymerisation Based Additive Manufacturing System

Danielak, Anna H. ; M. Ribo, Macarena ; Pedersen, David B. ; Islam, Aminul
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2018

 

Correlation of mechanical and electrical properties with processing variables in MWCNT reinforced thermoplastic nanocomposites

Doagou-Rad, Saeed ; Islam, Aminul ; Jensen, Jakob Søndergaard
in: Journal of Composite Materials, vol: 52, issue: 26, pages: 3681–3697

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1177/0021998318768390

  PDF

Damping Behavior of Carbon Nanotube Reinforced Nanocomposites: Micromechanical Modeling and Experiments

Doagou-Rad, S. ; Jensen, J. S. ; Islam, A.
Presented at:
ECCM18 - 18th European Conference on Composite Materials

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Development of Highly Conductive Hybrid Composites

Islam, A. ; Rad, S. D.
Presented at:
P70 - Polymer Engineering International/ UK-China AMRI

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2018

 

Direct fabrication of bio-inspired gecko-like geometries with vat polymerization additive manufacturing method

Davoudinejad, A. ; M. Ribo, M. ; Pedersen, D. B. ; Islam, A. ; Tosello, G.
in: Journal of Micromechanics and Microengineering, vol: 28

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1088/1361-6439/aabf17

  PDF

Effect of process parameters on flow length and flash formation in injection moulding of high aspect ratio polymeric micro features

Eladl, Abdelkhalik ; Mostafa, Rania ; Islam, Aminul ; Loaldi, Dario ; Soltan, Hassan ; Hansen, Hans N. ; Tosello, Guido
in: Micromachines, vol: 9, issue: 2

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3390/mi9020058

 

Interaction of nanofillers in injection-molded graphene/carbon nanotube reinforced PA66 hybrid nanocomposites

Doagou-Rad, Saeed ; Islam, Aminul ; Jensen, Jakob S. ; Alnasser, Ammar
in: Journal of Polymer Engineering

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2018     |    DOI: https://doi.org/10.1515/polyeng-2018-0060

 

Multimaterial Micro Injection Molding

Islam, Aminul
part of: Micro Injection Molding, pages: 339-377, 2018, Carl Hanser Verlag, Munich

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3139/9781569906545.013

  PDF

Systematic Analysis of the Effects of Moulding Conditions on the Properties of Shape Memory Polymers

Danielak, A. H. ; Islam, Aminul
Presented at:
34th International Confernce of the Polymer Processing Society

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018

2017
  PDF

3D Printing of Bio-inspired surfaces

Méndez Ribó, Macarena ; Islam, Aminul
Presented at:
Wilhelm und Else Heraeus Seminar: Bio-inspired, Nano- and Microstructured Surfaces: New Functionality by Material and Structure

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2017