Guido Tosello

Guido Tosello

Lektor

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Proces- og Produktionsteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 427, rum 323B

2800 Kgs. Lyngby

Tlf.
Fax 45 25 19 61
E-mail guto@mek.dtu.dk
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Aktiviteter
Kurser
DTU nyheder
Loading

Publikationer rss feed

2018
 

Effects of micro-injection moulding process parameters on accuracy and precision of thermoplastic elastomer micro rings

Baruffi, Federico ; Calaon, Matteo ; Tosello, Guido
in journal: Precision Engineering (ISSN: 0141-6359) (DOI: http://dx.doi.org/10.1016/j.precisioneng.2017.09.006), vol: 51, pages: 353-361, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: http://dx.doi.org/10.1016/j.precisioneng.2017.09.006

  PDF

Effect of process parameters on flow length and flash formation in injection moulding of high aspect ratio polymeric micro features

Eladl, Abdelkhalik ; Mostafa, Rania ; Islam, Aminul ; Loaldi, Dario ; Soltan, Hassan ; Hansen, Hans Nørgaard ; Tosello, Guido
in journal: Micromachines (ISSN: 2072-666X) (DOI: http://dx.doi.org/10.3390/mi9020058), vol: 9, issue: 2, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: http://dx.doi.org/10.3390/mi9020058

 

Thermal behaviour of additively manufactured injection moulding inserts

Hofstätter, Thomas ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, 2018, The European Society for Precision Engineering and Nanotechnology,
Presented at:
euspen's 18th International Conference & Exhibition, 2018, Venice

Type: Conference abstract in proceedings (Peer reviewed)

Status: Accepted/In press     |    År: 2018

 

Comparison of surface extraction techniques performance in computed tomography for 3D complex micro-geometry dimensional measurements

Torralba, Marta ; Jiménez, Roberto ; Yagüe-Fabra, José A. ; Ontiveros, Sinué ; Tosello, Guido
in journal: International Journal of Advanced Manufacturing Technology (ISSN: 0268-3768) (DOI: http://dx.doi.org/10.1007/s00170-018-1950-9), 2018

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2018     |    DOI: http://dx.doi.org/10.1007/s00170-018-1950-9

2017
 

Flow visualization and simulation of the filling process during injection molding

Guerrier, Patrick ; Tosello, Guido ; Hattel, Jesper Henri
in journal: C I R P - Journal of Manufacturing Science and Technology (ISSN: 1755-5817) (DOI: http://dx.doi.org/10.1016/j.cirpj.2016.08.002), vol: 16, pages: 12–20, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1016/j.cirpj.2016.08.002

  PDF

Moulded Pulp Manufacturing: Overview and Prospects for the Process Technology

Didone, Mattia ; Saxena, Prateek ; Meijer, Ellen Brilhuis ; Tosello, Guido ; Bissacco, Giuliano ; McAloone, Tim C. ; Pigosso, Daniela Cristina Antelmi ; Howard, Thomas J.
in journal: Packaging Technology and Science (ISSN: 0894-3214) (DOI: http://dx.doi.org/10.1002/pts.2289), vol: 30, issue: 6, pages: 231-249, 2017

Type: Review (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1002/pts.2289

  PDF

Rheology of high melt strength polypropylene for additive manufacturing

Jagenteufel, Ralf ; Hofstätter, Thomas ; Kamleitner, Florian ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
in journal: Advanced Materials Letter (ISSN: 0976-3961) (DOI: http://dx.doi.org/10.5185/amlett.2017.1450), vol: 8, issue: 6, pages: 712-716, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.5185/amlett.2017.1450

  PDF

Applications of Fiber-Reinforced Polymers in Additive Manufacturing

Hofstätter, Thomas ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
in journal: Procedia C I R P (ISSN: 2212-8271) (DOI: http://dx.doi.org/10.1016/j.procir.2017.03.171), vol: 66, pages: 312-316, 2017
Presented at:
1st CIRP Conference On Composite Materials Parts Manufacturing, 2017, Karlsruhe

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1016/j.procir.2017.03.171

  PDF

Experimental approach for the uncertainty assessment of 3D complex geometry dimensional measurements using computed tomography at the mm and sub-mm scales

Jiménez, Roberto ; Torralba, Marta ; Yagüe-Fabra, José A. ; Ontiveros, Sinué ; Tosello, Guido
in journal: Sensors (ISSN: 1424-8220) (DOI: http://dx.doi.org/10.3390/s17051137), vol: 17, issue: 5, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.3390/s17051137

 

Replication quality assessment and uncertainty evaluation of a polymer precision injection moulded component

Baruffi, Federico ; Calaon, Matteo ; Tosello, Guido ; Hansen, Hans Nørgaard ; Prantl, Manfred ; Miller, Nathan
part of: Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 495-496, 2017, The European Society for Precision Engineering and Nanotechnology,
Presented at:
17th euspen International Conference & Exhibition, 2017, Hannover

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2017