Picture describing the Reliablade-project

RELIABLADE project: Increased Reliability of Rotor Blades

Wind energy Energy

Two of the world’s leading institutions when it comes to wind energy, German Fraunhofer Institute for Wind Energy Systems IWES and Danish DTU Wind Energy, have joined forces and national funded projects in the new €17.6 million RELIABLADE project creating a strategic collaboration to strengthen research collaboration and offer new innovative services to European industrial partners.

Developing rotor blades
For the project, researchers will develop a blade design for a 40 meter blade. This will serve as a blueprint for manufacturing two blades at Fraunhofer IWES and challenge them under experimental tests at the DTU in order to intentionally damage them under controlled conditions.

"The vision for the project is to develop methodologies for design, operation and maintenance of wind turbine rotor blades using a digital twin of every blade manufactured. We will then use this digital twin to follow the current state and predicting the future state of each blade during its entire life cycle using an automated condition monitoring approach"
Kim Branner, Project Manager, DTU Wind Energy

“We want to improve the understanding of the structural behaviour of rotor blades. Therefore, we have developed a project in which we have control over the blade design, the manufacturing and the test and can investigate the damage process over the entire blade life with advanced numerical and experimental methods. This is truly unique in the wind turbine blade research and enables us to validate complex damage models.” explains project manager Florian Sayer from Fraunhofer IWES.

To cover a wide range of different damage modes the two rotor blades for testing will encompass production errors such as inferior bond lines and damage to the composite or sandwich materials. The test blades will then be sent to the project partner DTU Wind Energy, where the behaviour of the damaged parts will be assessed in a full-blade test.

“The vision for the project is to develop methodologies for design, operation and maintenance of wind turbine rotor blades using a digital twin of every blade manufactured. We will then use this digital twin to follow the current state and predicting the future state of each blade during its entire life cycle using an automated condition monitoring approach,” explains project manager Kim Branner from DTU Wind Energy.

Improving structural reliability
The German and Danish project partners also plans on conducting subcomponent tests and developing fatigue models as well as damage prediction methods.

With RELIABLADE, the project partners are making a decisive contribution to improve the structural reliability of rotor blades. That is important, as rotor blades constitute a large share of the turbine costs and their repair and service costs are relatively high. The results obtained will allow the industry to make progress towards improving cost-efficiency, cutting energy production costs, and increasing its competitiveness internationally.

Strategic collaboration in the field of rotor blade research

The Danish project

 

The German project