Aminul Islam

Aminul Islam

Associate Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 323A

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 19 61
E-mail mais@mek.dtu.dk
ORCID 0000-0002-8275-6631
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2019
 

Characterization techniques for evaluation of micro scale vat photopolymerization-based additive manufacturing

Danielak, Anna Halina ; Mendez Ribo, Macarena ; Üstünyagiz, Esmeray ; Almdal, Kristoffer ; Islam, Aminul ; Pedersen, David Bue
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 44-47, 2019
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Impact of post-processing stages on vat-photopolymerized specimens

M. Ribo, M. ; Danielak, A. H. ; Andersen, S. A. ; Üstünyagiz, E. ; Islam, A. ; Pedersen, D. B.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 155, 2019
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Injection Moulding Simulation and Validation of Thin Wall Components for Precision Applications

Islam, Aminul ; Li, Xiaoliu ; Wirska, Maja
part of: Advances in Manufacturing II, pages: 96-107, 2019
Presented at:
Sixth International Scientific-Technical Conference Manufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/978-3-030-16943-5_9

  PDF

Optimization of a self-peeling vat for precision vat photopolymerization setups

M. Ribo, Macarena ; Danielak, Anna H. ; Islam, Aminul ; Pedersen, David B.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 234-237, 2019
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

2018
 

Characterisation of the Influence of the Colour in Resin for Micro Parts Production by Photopolymerisation Based Additive Manufacturing System

Danielak, Anna H. ; M. Ribo, Macarena ; Pedersen, David B. ; Islam, Aminul
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 64-69, 2018
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

Damping Behavior of Carbon Nanotube Reinforced Nanocomposites: Micromechanical Modeling and Experiments

Doagou-Rad, S. ; Jensen, J. S. ; Islam, A.
part of: 18th European Conference on Composite Materials (ECCM-18) , 2018
Presented at:
ECCM18 - 18th European Conference on Composite Materials

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Systematic Analysis of the Effects of Moulding Conditions on the Properties of Shape Memory Polymers

Danielak, A. H. ; Islam, Aminul
in: A I P Conference Proceedings Series, vol: 2065
Presented at:
34th International Conference of the Polymer Processing Society

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1063/1.5088251

2017
  PDF

3D Printing of Bio-inspired surfaces

Méndez Ribó, Macarena ; Islam, Aminul
Presented at:
Wilhelm und Else Heraeus Seminar

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2017

 

Biological features produced by additive manufacturing processes using vat photopolymerization method

Davoudinejad, Ali ; Mendez Ribo, Macarena ; Pedersen, David Bue ; Tosello, Guido ; Islam, Aminul
part of: Proceedings of the euspen Special Interest Group Meeting, 2017
Presented at:
euspen Special Interest Group Meeting: Micro/Nano Manufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

Influence of Processing Conditions on the Mechanical Behavior of MWCNT Reinforced Thermoplastic Nanocomposites

Doagou Rad, Saeed ; Islam, Aminul ; Jensen, Jakob Søndergaard
in: Procedia CIRP, vol: 66, pages: 131-136
Presented at:
1st CIRP Conference On Composite Materials Parts Manufacturing

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1016/j.procir.2017.03.362