Yang Zhang

Yang Zhang

Senior Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 323B

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 48 70
E-mail yazh@mek.dtu.dk
ORCID 0000-0002-0883-8233
Home page

Request a vCard via e-mail.

Publications
Projects
Activities
Courses
Loading

Publications rss feed

2020
 

Influences of micro-ridges orientation and position on the replication of micro-structured surfaces by injection molding

Regi, Francesco ; Basso, Alberto ; Kain, Martin ; Loaldi, Dario ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
in: AIP Conference Proceedings, vol: 2205, issue: 1
Presented at:
35th International Conference of the Polymer Processing Society (PPS-35)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1063/1.5142928

 

Replication of micro-structured surfaces by integrating AM with PIM

Basso, Alberto ; Mendez Ribo, Macarena ; Christensen, Simon Emil ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
euspen's 20th International Conference & Exhibition

Type: Conference abstract for conference (Peer reviewed)

Status: Accepted/In press     |    Year: 2020

2019
  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 71-74, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Additive manufacturing of metal components – process-material interaction in different process chains

Hansen, H. N. ; Hattel, J. H. ; Pedersen, D. B. ; Mohanty, S. ; Andersen, S. A. ; Nadimpalli, V. K. ; Klingaa, C. G. ; Dahmen, T. ; Zhang, Y.
in: I O P Conference Series: Materials Science and Engineering, vol: 580, issue: 1
Presented at:
40th Risø International Symposium on Material Science: Metal Microstructures in 2D, 3D, and 4D

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1088/1757-899x/580/1/012006

  PDF

Breaking the Limit of Micro-Ductility in Oxide Glasses

Januchta, Kacper ; Stepniewska, Malwina ; Jensen, Lars Rosgaard ; Zhang, Yang ; Somers, Marcel A. J. ; Bauchy, Mathieu ; Yue, Yuanzheng ; Smedskjær, Morten Mattrup
in: Advanced Science, vol: 6, issue: 18

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1002/advs.201901281

  PDF

Experimental investigation and thermo-mechanical modelling for tool life evaluation of photopolymer additively manufactured mould inserts in different injection moulding conditions

Davoudinejad, Ali ; Bayat, Mohamad ; Pedersen, David Bue ; Zhang, Yang ; Hattel, Jesper Henri ; Tosello, Guido
in: International Journal of Advanced Manufacturing Technology, vol: 102, issue: 1-4, pages: 403–420

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s00170-018-3163-7

 

Functionality characterization of injection moulded micro-structured surfaces

Regi, Francesco ; Doest, Mads ; Loaldi, Dario ; Li, Dongya ; Frisvad, Jeppe Revall ; Tosello, Guido ; Zhang, Yang
in: Precision Engineering, vol: 60, pages: 594-601

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.precisioneng.2019.07.014

  PDF

Observation of Crack-Free Vickers Indents at 500 N in Annealed Caesium Aluminoborate Glass

Januchta, K. ; Stepniewska, M. ; Yue, Yuanzheng ; Jensen, L. ; Zhang, Yang ; Munch, Steffen S. ; Somers, Marcel A. J. ; Smedskjær, Morten Mattrup
Presented at:
25th International Congress on Glass

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Optimization of corner micro end milling by finite element modelling for machining thin features

Davoudinejad, Ali ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
in: Procedia CIRP, vol: 82, pages: 362-367
Presented at:
17th CIRP Conference on Modelling of Machining Operations

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.procir.2019.04.158