Leonardo De Chiffre

Leonardo De Chiffre

Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 206

2800 Kgs. Lyngby

Ph.
Fax +4545 25 19 61
E-mail ldch@mek.dtu.dk
ORCID 0000-0002-6141-9580
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2019
  PDF

Roughness Investigation of SLM Manufactured Conformal Cooling Channels Using X-ray Computed Tomography

Klingaa, Christopher G. ; Bjerre, Mathias K. ; Baier, Sina ; De Chiffre, Leonardo ; Mohanty, Sankhya ; Hattel, Jesper H.
part of: Proceedings of the 9th Conference on Industrial Computed Tomography, Padova, Italy (iCT 2019), 2019
Presented at:
9th Conference on Industrial Computed Tomography (ICT2019)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Thermal characterization of a micro polishing machine and effect on path strategy compensation

Ben Achour, Soufian ; Checchi, Alessandro ; Bissacco, Giuliano ; De Chiffre, Leonardo
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 446-447, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

2018
  PDF

Accurate measurements in a production environment using dynamic length metrology (DLM)

Chiffre, L. De ; González-Madruga, D. ; Costa, G. Dalla ; Sonne, M.R. ; Mohammadi, A. ; Hattel, J.H. ; Hansen, H.N. ; Mohaghegh, K. ; Meftahpour, M. ; Meinertz, J. ; Meinertz, C.
in: Procedia CIRP, vol: 75, pages: 343-348
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.074

  PDF

Applicability of Acoustic Emission monitoring to micro polishing

Ben Achour, Soufian ; Bissacco, Giuliano ; De Chiffre, L.
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 385-386, 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

A simple model linking surface roughness with friction coefficient and manufacturing cost

De Chiffre, L. ; Kücükyildiz, Ô. C. ; Bay, N.
in: Key Engineering Materials, vol: 767 , pages: 275-282

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.4028/www.scientific.net/KEM.767.275

  PDF

Automated contact area measurement on structured surfaces

Kücükyildiz, Ömer C. ; Jensen, Sebastian H. N. ; De Chiffre, Leonardo
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 473-474 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Compensation of in-line metrology of polymer parts based on 3D thermomechanical analyses

Sonne, M.R. ; Costa, G. Dalla ; Madruga, D.G. ; Chiffre, L. De ; Hattel, J.H.
in: Procedia CIRP, vol: 75, pages: 349-354
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.083

  PDF

Considerations on numerical modelling for compensation of in-process metrology in manufacturing

Sonne, M. R. ; Mohammadi, A. ; Dalla Costa, G. ; Madruga, D. G. ; De Chiffre, L. ; Hattel, J. H.
part of: Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology , pages: 453-454 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

Effects of subsurface scattering on the accuracy of optical 3D measurements using miniature polymer step gauges

Wilm, Jakob ; Madruga, Daniel González ; Jensen, Janus Nørtoft ; Gregersen, Søren Kimmer Schou ; Doest, Mads Emil Brix ; Guerra, Maria Grazia ; Aanæs, Henrik ; De Chiffre, Leonardo
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 449-450, 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Post moulding thermal characterization of polymer components

D. Costa, G. ; González-Madruga, D. ; De Chiffre, L.
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 469-470 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018