Per Møller

Per Møller

Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Technical University of Denmark

Nils Koppels Allé

Building 404, room 216

2800 Kgs. Lyngby

Ph.
Fax +4545 25 19 61
E-mail pm@mek.dtu.dk
Home page

Request a vCard via e-mail.

Publications
Projects
DTU news
Loading

Publications rss feed

2017
 

Effect of Chemical Environment and pH on AC Corrosion of Cathodically Protected Structures

Junker-Holst, Andreas ; Vendelbo Nielsen, Lars ; Møller, Per
part of: Corrosion Conference and Expo 2017 , 2017, NACE International
Presented at:
NACE Corrosion 2017: Conference & Expo

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

2015
  PDF

Investigations on PVD Al/Ni electrocatalysts for alkaline water electrolysis

Kjartansdóttir, Cecilía Kristín ; Caspersen, Michael ; Egelund, Sune Daaskov ; Møller, Per
Presented at:
20th World Hydrogen Energy Conference 2014

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2015

  PDF

Material challenge for future fuel factories

Kaab, Malene ; Møller, Per
part of: Book of Abstracts. DTU's Sustain Conference 2015, 2015, Technical University of Denmark (DTU), Lyngby
Presented at:
DTU Sustain Conference 2015

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2015

2014
 

Characterization of aluminum and nickel thermochemical diffusion for synthesis of alkaline water electrolysis electrodes

Alimadadi, Hossein ; Kjartansdóttir, Cecilía Kristín ; Kasama, Takeshi ; Møller, Per
in: Microscopy and Microanalysis, vol: 20, issue: S3, pages: 510-511
Presented at:
Microscopy and Microanalysis 2014

Type: Conference abstract in journal (Peer reviewed)

Status: Published     |    Year: 2014     |    DOI: https://doi.org/10.1017/S1431927614004279

2013
 

Electroplated tin-nickel coatings as a replacement for nickel to eliminate nickel dermatitis

Møller, Per ; Boyce, Jan M. ; Nielsen, Lars Pleth
part of: National Association for Surface Finishing Annual Conference and Trade Show (SUR/FIN 2013), pages: 874-885, 2013, National Association for Surface Finishing
Presented at:
National Association for Surface Finishing Annual Conference and Trade Show

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

 

Evaluation of atmospheric corrosion on electroplated zinc and zinc nickel coatings by Electrical Resistance (ER) Monitoring

Møller, Per
part of: National Association for Surface Finishing Annual Conference and Trade Show (SUR/FIN 2013), pages: 583-591, 2013, National Association for Surface Finishing
Presented at:
National Association for Surface Finishing Annual Conference and Trade Show

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

  PDF

Steam Assisted Accelerated Growth of Oxide Layer on Aluminium Alloys

Din, Rameez Ud ; Yuksel, Serkan ; Jellesen, Morten Stendahl ; Møller, Per ; Ambat, Rajan
part of: Proceedings of Eurocorr 2013, 2014, European Federation of Corrosion
Presented at:
European Corrosion Congress

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

2012
 

Characterization of a Cobalt-Tungsten Interconnect

Harthøj, Anders ; Holt, Tobias ; Caspersen, Michael ; Møller, Per
part of: Proceedings of 10th European SOFC Forum, pages: 21/118 - 34/118, 2012
Presented at:
10th European SOFC Forum

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2012

 

Effect of No-Clean Flux Residues on the Performance of Acrylic Conformal Coating in Aggressive Environments

Rathinavelu, Umadevi ; Jellesen, Morten S. ; Møller, Per ; Ambat, Rajan
in: I E E E Transactions on Components, Packaging and Manufacturing Technology, vol: 2, issue: 4, pages: 719-728

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2012     |    DOI: https://doi.org/10.1109/TCPMT.2012.2186456

2011
 

Effect of chloride impurities on the performance and durability of polybenzimidazole-based high temperature proton exchange membrane fuel cells

Ali, Syed Talat ; Li, Qingfeng ; Pan, Chao ; Jensen, Jens Oluf ; Nielsen, Lars Pleth (Invited author) ; Møller, Per
in: International Journal of Hydrogen Energy, vol: 36, issue: 2, pages: 1628-1636
Presented at:
The 3rd Annual Korea-USA Joint Symposium on Hydrogen & Fuel Cell Technologies

Type: Conference article (Peer reviewed)     |     Invited contribution

Status: Published     |    Year: 2011     |    DOI: https://doi.org/10.1016/j.ijhydene.2010.10.076

2010
 

Cleanability Evaluation of Different Surfaces by Fouling from Contact Frying of Foods

Ashokkumar, Saranya ; Raagaard Thomsen, Birgitte ; Hinke, Jens ; Møller, Per ; Adler-Nissen, Jens
part of: Fouling and Cleaning in Food Processing 2010, pages: 24-33, 2010, Cambridge University Press, UK
Presented at:
Fouling and Cleaning in Food Processing 2010

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2010

  PDF

Investigation of Electronic Corrosion at Device Level

Jellesen, Morten Stendahl ; Minzari, Daniel ; Rathinavelu, Umadevi ; Møller, Per ; Ambat, Rajan
in: E C S Transactions, vol: 25, issue: 30, pages: 1-14
Presented at:
ECS Meeting : Corrosion of Electronic and Magnetic Materials

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1149/1.3321952

 

Mechanisms of electrochemical migration of tin by in-situ optical and electron microscopy

Minzari, Daniel ; Jellesen, Morten Stendahl ; Møller, Per ; Grumsen, Flemming Bjerg ; Mølhave, Kristian ; Jensen, Eric ; Ambat, Rajan
part of: Eurocorr 2010, 2010
Presented at:
EUROCORR 2010

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2010

 

On the application of thermodynamics of corrosion for service life design of concrete structures

Küter, Andre ; Geiker, Mette Rica ; Møller, Per
part of: Service Life Design for Infrastructure, pages: 637-644, 2010, RILEM Publications s.a.r.l., France
Presented at:
Service Life Design for Infrastructure

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2010

2009
 

Effect of Solder Flux Residues on Corrosion of Electronics

Hansen, Kirsten Stentoft (Invited author) ; Jellesen, Morten Stendahl ; Møller, Per ; Westermann, Peter Jacob Schwencke ; Ambat, Rajan
part of: Annual Reliability and Maintainability Symposium, 2009. RAMS 2009., 2009, IEEE Press
Presented at:
RAMS

Type: Article in proceedings     |     Invited contribution

Status: Published     |    Year: 2009     |    DOI: https://doi.org/10.1109/RAMS.2009.4914727

 

Influence of bacteria on silver dissolution from silver-palladium surfaces

Chiang, Wen-Chi ; Hilbert, Lisbeth Rischel ; Schroll, Casper ; Møller, Per ; Tolker-Nielsen, Tim
part of: European Corrosion Congress 2009, 2009
Presented at:
European Corrosion Congress 2009

Type: Article in proceedings

Status: Published     |    Year: 2009

 

Unexpected corrosion of stainless steel in low chloride waters – microbial aspects

Hilbert, Lisbeth Rischel ; Carpén, Leena ; Møller, Per ; Fontenay, Frank ; Mathiesen, Troels
part of: EUROCORR 2009, 2009
Presented at:
EUROCORR 2009

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2009

2008
 

A New Method to Inhibit Microbial and Biofilm Adhesions

Chiang, Wen-Chi ; Hilbert, Lisbeth Rischel ; Tolker-Nielsen, Tim ; Møller, Per
part of: IWA Biofilm Technologies Conference, 2008
Presented at:
IWA Biofilm Technologies Conference

Type: Article in proceedings

Status: Published     |    Year: 2008

  PDF

Corrosion Reliability of Electronic Systems

Ambat, Rajan ; Jensen, Stine G. ; Møller, Per
in: E C S Transactions, vol: 6, issue: 24, pages: 17-28
Presented at:
ECS Meeting : Corrosion (General)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2008     |    DOI: https://doi.org/10.1149/1.2900650

 

Influence of microstructure of 6063 aluminium alloy on the appearance of anodized layer

Tabrizian-Ghalehno, Naja ; Møller, Per ; Ambat, Rajan ; Hansen, Hans Nørgaard
part of: European Corrosion Congress 2008, 2008, DECHEMA
Presented at:
European Corrosion Congress

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2008

2007
  PDF

In-situ Investigation of Lead-free Solder Alloy Formation Using a Hot-plate Microscope

Bergmann, René ; Tang, Peter Torben ; Hansen, Hans Nørgaard ; Møller, Per
part of: Proceedings of the 9th IEEE Electronics Packaging Technology Conference, 2007, IEEE
Presented at:
9th IEEE Electronics Packaging Technology Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2007     |    DOI: https://doi.org/10.1109/EPTC.2007.4469822

 

Micro-electrochemical machining of aluminium

Prichystal, Jan ; Hansen, Hans Nørgaard ; Møller, Per ; Luca, Macilotti ; Bladt, Henrik H.
part of: Proceedings ISEM XV - International symposium on electromachining, 2007, University of Nebraska-Lincoln, Nebraska
Presented at:
ISEM XV - International symposium on electromachining

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2007

  PDF

Pulse Reversal PermAlloy Plating Process for MEMS Applications

Smistrup, Kristian ; Tang, Peter Torben ; Møller, Per
in: E C S Transactions, vol: 3, issue: 25, pages: 179-189
Presented at:
ECS Meeting : Magnetic Materials Processes, and Devices 9

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2007     |    DOI: https://doi.org/10.1149/1.2753252

2006
  PDF

Corrosion and Environmental Effects on Electronic Systems

Ambat, Rajan ; Møller, Per ; Westermann, Peter Jacob Schwencke
part of: Meeting Abstracts - Electrochemical Society, pages: Abstract 800, 2006, The Electrochemical Society
Presented at:
ECS Meeting : D2 - Corrosion of Electronic Materials and Devices

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2006

 

Corrosion of Steel in Concrete, Part I – Mechanisms

Küter, André ; Møller, Per ; Geiker, Mette Rica
part of: Dansk Metallurgisk Selskab, 2006, DMS, Lyngby, Denmark
Presented at:
Dansk Metallurgisk Selskabs Vintermøde 2006

Type: Article in proceedings

Status: Published     |    Year: 2006

 

Corrosion of stel reinforcement in concrete, Part II - Non-destructive testing

Nygaard, Peter Vagn ; Geiker, Mette Rica ; Klinghoffer, Oskar ; Møller, Per
part of: Korrosion: mekanismer, havarier og beskyttelse, pages: 101-115, 2006
Presented at:
Dansk Metallurgisk Selskab Vintermøde 2006

Type: Article in proceedings

Status: Published     |    Year: 2006

 

Erosion-corrosion behaviour of innovative hardening treatments

Jellesen, Morten Stendahl ; Hilbert, Lisbeth Rischel ; Møller, Per
part of: Eurocorr Proceedings 2006, 2006
Presented at:
EUROCORR 2006

Type: Article in proceedings

Status: Published     |    Year: 2006

 

Erosion-corrosion behaviour of innovative hardening treatmentsand coatings on stainless steels for food industry applications.

Jellesen, Morten Stendahl ; Hilbert, Lisbeth Rischel ; Møller, Per
part of: SUR/FIN 2006, 2006
Presented at:
SUR/FIN Manufacturing and Technology Conference 2006

Type: Article in proceedings

Status: Published     |    Year: 2006

 

Local residue detection tool for measuring conductive residue levels on printed circuit boards

Westermann, Peter ; Ambat, Rajan ; Møller, Per
Presented at:
Annual meeting of the Danish Electrochemical Society

Type: Poster

Status: Published     |    Year: 2006

 

Management of Reinforcement Corrosion

Küter, André ; Geiker, Mette Rica ; Møller, Per
Presented at:
Nanocem Spring Meeting 2006

Type: Poster

Status: Published     |    Year: 2006

 

Paradigm shift for PWD surface finishes in mobile phone terminals

Nielsen, Claus ; Rasmussen, Anette Alsted ; Ambat, Rajan ; Møller, Per
part of: Proceedings of the International Conference on Electronic Packaging, Japan, April 19-21, 2006, 2006
Presented at:
International Conference on Electronic Packaging

Type: Article in proceedings

Status: Published     |    Year: 2006

  PDF

Pulse Reversal PermAlloy Plating Process for MEMS Applications

Smistrup, Kristian ; Tang, Peter Torben ; Møller, Per
part of: Meeting Abstracts - Electrochemical Society, pages: Abstract 1673, 2006, The Electrochemical Society
Presented at:
213th ECS Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2006

 

Selective anodising technologies for obtaining translucent micro structures

Hansen, Hans Nørgaard ; Møller, Per ; Jarnov, Christian ; Staun, Jacob ; Prichystal, Jan Phuklin
part of: Towards synthesis of micro-/nano systems, pages: 175-180, 2006, Springer
Presented at:
11th international conference on precision engineering

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2006

 

Setup for combined electrochemical and friction testing during sliding wear

Jellesen, Morten Stendahl ; Hansen, Mikkel Østergaard ; Hilbert, Lisbeth Rischel ; Møller, Per
part of: Nordtrib 2006, 2006, DTU Tryk, Lyngby
Presented at:
Setup for combined electrochemical and friction testing during sliding wear

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2006

 

Studies on tribocorrosion explain low nickel release

Jellesen, Morten Stendahl ; Hilbert, Lisbeth Rischel ; Menné, Torkil ; Møller, Per
part of: Eurocorr Proceedings 2006, 2006
Presented at:
EUROCORR 2006

Type: Article in proceedings

Status: Published     |    Year: 2006

  PDF

The virtual classroom

Møller, Per ; Geiker, Mette Rica
part of: Knud Højgaard Conference, pages: 375-382, 2006, Technical University of Denmark, Department of Civil Engineering
Presented at:
Knud Højgaard Conference : Advanced Cement-Based Materials: Reserach and Training

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2006

2005
 

Corrosion of Steel in Concrete – Potential Monitoring and Electrochemical Impedance Spectroscopy during Corrosion Initiation and Propagation

Küter, Andre ; Mason, Thomas O. ; Geiker, Mette Rica ; Møller, Per
part of: Eurocorr 2005, The European Corrosion Congress, pages: 338-338, 2005, Rolo & Filhos Lda, Lisbon, Portugal
Presented at:
EUROCORR 2005

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2005

 

Corrosion of Steel in Concrete – Specimen Design for Investigation of Interface and Bulk Conversions during Curing and Exposure

Küter, Andre ; Møller, Per ; Geiker, Mette Rica
part of: Nordic Concrete Research, 2005, Norsk Betongforening, Oslo, Norway
Presented at:
19th Symposium on Nordic Concrete Research & Development

Type: Article in proceedings

Status: Published     |    Year: 2005

 

Effect of Guard Ring Arrangements on the Current Confinement and Polarisation of steel in concrete - Experiments and Modeling

Nygaard, Peter Vagn ; Møller, Per ; Sørensen, Henrik Erndahl ; Geiker, Mette Rica ; Klinghoffer, Oskar
part of: Eurocorr 2005 - Book of abstracts, 2005
Presented at:
EUROCORR 2005

Type: Article in proceedings

Status: Published     |    Year: 2005

 

Korrelation Prozeß - Gefüge - Eigenschaften

Pantleon, Karen ; Tang, Peter Torben ; Rasmussen, Anette Alsted ; Mizushima, Io ; Jensen, Jens Dahl ; Møller, Per ; Somers, Marcel A.J.
part of: Proceedings of 6. Industriefachtagung "Oberflächen- und Wärmebehandlungstechnik", 2005
Presented at:
8. Werkstofftechnischen Kolloquium

Type: Article in proceedings

Status: Published     |    Year: 2005

 

New trends for PWB surface finishes in mobile phone applications

Nielsen, Claus Würtz ; Ambat, Rajan ; Rasmussen, Anette Alsted ; Møller, Per
part of: Proceedings of Pan Pacific Microelectronic Symposium, 2006
Presented at:
Pan Pacific Microeletronics Symposium

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2005

 

The electrochemical deposition of tin-nickel alloys and the corrosion properties of the coating

Jellesen, Morten Stendahl ; Møller, Per
part of: AESF Sur / Fin, 2005
Presented at:
SUR/FIN Manufacturing and Technology Conference 2005

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2005

2004
 

Corrosion of steel in concrete

Küter, André ; Geiker, Mette Rica ; Møller, Per
part of: Proceeding of 13th Scandinavian Corrosion Congress, 2004

Type: Article in proceedings

Status: Published     |    Year: 2004

 

Corrosion of Steel in Concrete – Thermodynamical Aspects

Küter, Andre ; Møller, Per ; Geiker, Mette Rica
part of: 13. Scandinavian Corrosion Congress, 2004, The Icelandic Building Research Insitute, Reykjavic, Iceland
Presented at:
13th Scandinavian Corrosion Congress

Type: Article in proceedings

Status: Published     |    Year: 2004

2003
 

Creation of Micro Products in the future - joining of materials as a key technology

Møller, Per ; Hansen, Hans Nørgaard
part of: JOM-11, 2003
Presented at:
International Conference on the Joining of Materials

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2003

2002
  PDF

Electrodeposition of CuInSe2

Lindberg, Martin ; Poulsen, Peter Behrensdorff ; Møller, Per
Presented at:
14th Workshop on Quantum Solar Energy Conversion

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2002

 

Microstructure & Other Properties of Pulse-Plated Copper for Electroforming Applications

Tang, Peter Torben ; Jensen, Jens Dahl ; Dam, H.C. ; Møller, Per
part of: SUR/FIN 2002, 2002, AESF
Presented at:
SUR/FIN Manufacturing and Technology Conference 2002

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2002

 

Mikroteknologiske Komponenter - udvikling af produkter og produktionsprocesser

Hansen, Hans Nørgaard ; Møller, Per
part of: ATV Semapp; Sprøjtestøbning af Miniature- og Mikrokomponenter, 2002
Presented at:
ATV Semapp; Sprøjtestøbning af Miniature- og Mikrokomponenter

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2002

2001
 

Magnetoelastic Transducer Materials - a Plateable Possibility

Jensen, Jens Dahl ; Møller, Per
part of: SURFIN 2001, 2001, AESF
Presented at:
SUR/FIN Manufacturing and Technology Conference 2001

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2001

2000
 

Corrosion Resistance and Microstructure of Electrolytic Zinc Composite Coatings

Møller, Per ; Fontenay, Frank ; Andersen, Lasse Bøgede
part of: SUR/FIN 2000 (CD), 2000
Presented at:
SUR/FIN Manufacturing and Technology Conference 2000

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2000

 

Electroplating and Characterisation of Zinc Composite Coatings

Fontenay, ; Andersen, Lasse Bøgede ; Møller, Per
part of: Electroplating and Characterisation of Zinc Composite Coatings, 2000

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2000

 

Fabrication of Microcomponents by Electrochemical Manufacturing: Advanced Feed-Through Metallisation on Silicon and Nickel Micromechanical Resonators

Tang, Peter Torben ; Heschel, Matthias ; Ravnkilde, Jan Tue ; Hansen, Ole ; Møller, Per ; Alting, Leo
part of: 1st euspen topical conference on Fabrication and Metrology in Nanotechnology, 2000, IPL
Presented at:
1st euspen Topical Conference on Fabrication and Metrology in Nanotechnology

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2000

1997
  PDF

Fabrication of an all-metal atomic force microscope probe

Rasmussen, Jan Pihl ; Tang, Peter Torben ; Hansen, Ole ; Møller, Per ; Sander, Curt
part of: Proceedings of Transducers 97, pages: 463-466, 1997, IEEE, Chicago
Presented at:
International Conference on Solid-state Sensors and Actuators (Transducers 1997)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 1997     |    DOI: https://doi.org/10.1109/SENSOR.1997.613686

 

Molybdate based passivation of zinc

Tang, Peter Torben ; Bech-Nielsen, Gregers ; Møller, Per
in: Transactions of the Institute of Metal Finishing, vol: 75, issue: Part 4, pages: 144-148
Presented at:
Interfinish 96 world congress

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 1997

 

Proteins at Metallic Surfaces Investigated by in Situ Scanning Tunneling Microscopy

Andersen, Jens Enevold Thaulov ; Friis, Esben P. ; Thuesen, Marianne Hallberg ; Karlsson, Jens-Jakob ; Ulstrup, Jens ; Nielsen, M.F. ; Madsen, Lars Lithen ; Møller, Per
part of: Electron and Ion Transfer in Condensed Media, pages: 402-414, 1997, World Scientific, Singapore
Presented at:
Adriatico Conference on Electron and Ion Transfer

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 1997

1996
 

Pulse Plating

Møller, Per ; Tang, Peter Torben ; Leisner, Peter
part of: Pulse Plating, 1996
Presented at:
SUR/FIN Manufacturing and Technology Conference 1996

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 1996

1995
 

Nickel Coatings and Electroforming Using Pulse Reversal Plating

Tang, Peter Torben ; Dylmer, Henrik ; Møller, Per
part of: SUR/FIN '95, 1995, AESF
Presented at:
SUR/FIN Manufacturing and Technology Conference 1995

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 1995

1994
 

Dual-bath Plating of Composition Modulated Alloys (CMA) based on a newly developed Computer Controlled Plating System

Tang, Peter Torben ; Leisner, Peter ; Møller, Per ; Nielsen, C. Bergenstof ; NabiRahni, D.M.A.
part of: SUR/FIN '94, 1994, AESF
Presented at:
SUR/FIN Manufacturing and Technology Conference 1994

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 1994

1993
 

Improvements of Nickel Deposit Characteristics by Pulse Plating

Tang, Peter Torben ; Leisner, Peter ; Møller, Per
part of: SUR/FIN '93, 1993, AESF
Presented at:
SUR/FIN Manufacturing and Technology Conference 1993

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 1993

1992
 

Overfladebehandling af Aluminium og Magnesium

Møller, Per
part of: Dansk Metallurgisk Selskabs Vintermøde, 1992
Presented at:
Dansk Metallurgisk Selskabs Vintermøde 1992

Type: Article in proceedings

Status: Published     |    Year: 1992