Per Møller

Per Møller

Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Technical University of Denmark

Nils Koppels Allé

Building 404, room 216

2800 Kgs. Lyngby

Ph.
Fax +4545 25 19 61
E-mail pm@mek.dtu.dk
Home page

Request a vCard via e-mail.

Publications
Projects
DTU news
Loading

Publications rss feed

2019
 

Change of the Decorative Properties of Zinc-Plated Zinc Die Castings over Time

Reveko, Valeriia ; Lampert, Felix ; Winther, Grethe ; Møller, Per
in: International Journal of Metalcasting, vol: 13, issue: 1, pages: 130-136

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s40962-018-0237-0

 

Electrodeposition of Iron with Co-deposition of Carbon: On the Nature of Nanocrystalline Fe-C Coatings

Nielsen, Jacob Obitsø ; Møller, Per ; Pantleon, Karen
in: Metallurgical and Materials Transactions A, vol: 50A, issue: 8, pages: 3785-3793

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s11661-019-05311-z

 
 

Investigation of High pH Corrosion under Alternating Current Interference

Olesen, Andreas ; Nielsen, Lars ; Møller, Per
in: Corrosion, vol: 75, issue: 7, pages: 982-989

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.5006/3119

 

The Potential of Biogas; The Solution to Energy Storage

Villadsen, Sebastian N. B. ; Fosbøl, Philip L. ; Angelidaki, Irini ; Woodley, John M. ; Nielsen, Lars P. ; Møller, Per
in: ChemSusChem, vol: 12, issue: 10, pages: 2147-2153

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1002/cssc.201900100

2018
 

An electroplated copper–silver alloy as antibacterial coating on stainless steel

Ciacotich, Nicole ; Din, Rameez Ud ; Sloth, Jens J. ; Møller, Per ; Gram, Lone
in: Surface and Coatings Technology, vol: 345, pages: 96-104

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.surfcoat.2018.04.007

 

False-positive result when a diphenylcarbazide spot test is used on trivalent chromium-passivated zinc surfaces

Reveko, Valeriia ; Lampert, Felix ; Din, Rameez Ud ; Thyssen, Jacob P. ; Møller, Per
in: Contact Dermatitis, vol: 78, issue: 5, pages: 315-320

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1111/cod.12955

  PDF

Investigation of stone-hard-soil formation from AC corrosion of cathodically protected pipeline

Junker, Andreas ; Belmonte, Louise Josefine ; Kioupis, Nick ; Nielsen, Lars Vendelbo ; Moller, Per
in: Materials and Corrosion, vol: 69, issue: 9, pages: 1170-1179

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1002/maco.201709947

  PDF

Probing the chemistry of adhesion between a 316L substrate and spin-on-glass coating

Lampert, Felix ; Kadkhodazadeh, Shima ; Kasama, Takeshi ; Dahl, Kristian Vinter ; Christiansen, Alexander Bruun ; Møller, Per
in: Langmuir, vol: 34, issue: 10, pages: 3170-3176

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1021/acs.langmuir.7b03131

 

Properties and performance of spin-on-glass coatings for the corrosion protection of stainless steels in chloride media

Lampert, Felix ; Jensen, Annemette H. ; Din, Rameez U. ; Gonzalez-Garcia, Yaiza ; Møller, Per
in: Materials and Corrosion, vol: 69, issue: 9, pages: 1279-1291

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1002/maco.201710016

 

Surface technology is essential for transition to a hydrogen-based energy system

Nielsen, L. P. ; Leisner, P. ; Møller, P.
in: Transactions of the Institute of Metal Finishing, vol: 96, issue: 1, pages: 8-10

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1080/00202967.2018.1403093

2017
  PDF

Corrosion Resistance of AISI 316L Coated with an Air-Cured Hydrogen Silsesquioxane Based Spin-On-Glass Enamel in Chloride Environment

Lampert, Felix ; Bruun Christiansen, Alexander ; Din, Rameez Ud ; Gonzalez-Garcia, Yaiza ; Møller, Per
in: Corrosion Science, vol: 127, pages: 110-119

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1016/j.corsci.2017.08.024

 

Effect of Chemical Environment and pH on AC Corrosion of Cathodically Protected Structures

Junker-Holst, Andreas ; Vendelbo Nielsen, Lars ; Møller, Per
part of: Corrosion Conference and Expo 2017 , 2017, NACE International
Presented at:
NACE Corrosion 2017: Conference & Expo

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

 

Interfacial Interaction of Oxidatively Cured Hydrogen Silsesquioxane Spin-On-Glass Enamel with Stainless Steel Substrate

Lampert, Felix ; Kadkhodazadeh, Shima ; Jensen, Annemette H. ; Din, Rameez Ud ; Møller, Per
in: Journal of The Electrochemical Society, vol: 164, issue: 6, pages: C231-C239

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1149/2.0681706jes

  PDF

Nickel-aluminum diffusion: A study of evolution of microstructure and phase

Alimadadi, Hossein ; Kjartansdóttir, Cecilía Kristín ; Burrows, Andrew ; Kasama, Takeshi ; Møller, Per
in: Materials Characterization, vol: 130, pages: 105-112

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1016/j.matchar.2017.05.039

2016
  PDF

Hydrogen Silsesquioxane based silica glass coatings for the corrosion protection of austenitic stainless steel

Lampert, Felix ; Jensen, Annemette Hindhede ; Din, Rameez Ud ; Møller, Per
in: Surface and Coatings Technology, vol: 307, issue: Part A, pages: 879–885

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2016     |    DOI: https://doi.org/10.1016/j.surfcoat.2016.10.020

 

Low Temperature Curing of Hydrogen Silsesquioxane Surface Coatings for Corrosion Protection of Aluminum

Lampert, Felix ; Jensen, Annemette Hindhede ; Møller, Per
in: NASF Surface Technology White Papers, vol: 80, issue: 4

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2016

 

Manufacturing of a LaNiO3 composite electrode for oxygen evolution in commercial alkaline water electrolysis

Egelund, Sune ; Caspersen, Michael ; Nikiforov, Aleksey Valerievich ; Møller, Per
in: International Journal of Hydrogen Energy, vol: 41, issue: 24, pages: 10152-10160

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2016     |    DOI: https://doi.org/10.1016/j.ijhydene.2016.05.013

2015
 

Corrosion issues of powder coated AA6060 aluminium profiles

Din, Rameez Ud ; Valgarðsson, Smári ; Jellesen, Morten Stendahl ; Eriksen, Hans Jørgen ; Praastrup, Ulrik ; Møller, Per ; Ambat, Rajan
in: Engineering Failure Analysis, vol: 47, pages: 16–24

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.1016/j.engfailanal.2014.10.001

 

Electrical Resistance Measurements and Microstructural Characterization of the Anode/Interconnect Contact in Simulated Anode-Side SOFC Conditions

Harthøj, Anders ; Alimadadi, Hossein ; Holt, Tobias ; Møller, Per
in: Journal of The Electrochemical Society, vol: 162, issue: 4, pages: 387-396

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.1149/2.0381504jes

  PDF

Investigations on PVD Al/Ni electrocatalysts for alkaline water electrolysis

Kjartansdóttir, Cecilía Kristín ; Caspersen, Michael ; Egelund, Sune Daaskov ; Møller, Per
Presented at:
20th World Hydrogen Energy Conference 2014

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2015

  PDF

Material challenge for future fuel factories

Kaab, Malene ; Møller, Per
part of: Book of Abstracts. DTU's Sustain Conference 2015, 2015, Technical University of Denmark (DTU), Lyngby
Presented at:
DTU Sustain Conference 2015

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2015

 

Oxidation behaviour and electrical properties of cobalt/cerium oxide composite coatings for solid oxide fuel cell interconnects

Harthøj, Anders ; Holt, Tobias ; Møller, Per
in: Journal of Power Sources, vol: 281, pages: 227-237

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.1016/j.jpowsour.2015.01.128

 

The effect of surface treatment and topography on corrosion behavior of EN 1.4404 stainless steel

Lage, R. ; Møller, Per ; Fallesen, Henrik Ebbe
in: Materials and Corrosion, vol: 66, issue: 10, pages: 1060-1067

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.1002/maco.201407854

2014
 

Allergic chromium dermatitis from wearing 'chromium-free' footwear

Thyssen, Jacob P. ; Jellesen, Morten Stendahl ; Møller, Per ; Menne, Torkil ; Johansen, Jeanne D.
in: Contact Dermatitis, vol: 70, issue: 3, pages: 185-187

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2014     |    DOI: https://doi.org/10.1111/cod.12189

 

Characterization of aluminum and nickel thermochemical diffusion for synthesis of alkaline water electrolysis electrodes

Alimadadi, Hossein ; Kjartansdóttir, Cecilía Kristín ; Kasama, Takeshi ; Møller, Per
in: Microscopy and Microanalysis, vol: 20, issue: S3, pages: 510-511
Presented at:
Microscopy and Microanalysis 2014

Type: Conference abstract in journal (Peer reviewed)

Status: Published     |    Year: 2014     |    DOI: https://doi.org/10.1017/S1431927614004279

 
 

Failure of total hip implants: metals and metal release in 52 cases

Jakobsen, Stig Storgaard ; Lidén, Carola ; Søballe, Kjeld ; Johansen, Jeanne D. ; Menné, Torkil ; Lundgren, Lennart ; Bregnbak, David ; Møller, Per ; Jellesen, Morten Stendahl ; Thyssen, Jacob P.
in: Contact Dermatitis, vol: 71, pages: 319–325

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2014     |    DOI: https://doi.org/10.1111/cod.12275

2013
 

Assessment of modified gold surfaced titanium implants on skeletal fixation

Zainali, Kasra ; Danscher, Gorm ; Jakobsen, Thomas ; Baas, Jorgen ; Møller, Per ; Bechtold, Joan E. ; Soballe, Kjeld
in: Journal of Biomedical Materials Research. Part A, vol: 101 A, issue: 1, pages: 195-202

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: https://doi.org/10.1002/jbm.a.34307

 

Consumer leather exposure: an unrecognized cause of cobalt sensitization

Thyssen, J.P. ; Johansen, Jeanne D. ; Jellesen, Morten Stendahl ; Møller, Per ; Sloth, Jens Jørgen ; Zachariae, Claus ; Menne, Torkil
in: Contact Dermatitis, vol: 69, issue: 5, pages: 276-279

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: https://doi.org/10.1111/cod.12101

 

Development of durable and efficient electrodes for large-scale alkaline water electrolysis

Kjartansdóttir, Cecilia Kristin ; Nielsen, Lars Pleth ; Møller, Per
in: International Journal of Hydrogen Energy, vol: 38, issue: 20, pages: 8221-8231

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: https://doi.org/10.1016/j.ijhydene.2013.04.101

 

Electroplated tin-nickel coatings as a replacement for nickel to eliminate nickel dermatitis

Møller, Per ; Boyce, Jan M. ; Nielsen, Lars Pleth
part of: National Association for Surface Finishing Annual Conference and Trade Show (SUR/FIN 2013), pages: 874-885, 2013, National Association for Surface Finishing
Presented at:
National Association for Surface Finishing Annual Conference and Trade Show

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

 

Evaluation of atmospheric corrosion on electroplated zinc and zinc nickel coatings by Electrical Resistance (ER) Monitoring

Møller, Per
part of: National Association for Surface Finishing Annual Conference and Trade Show (SUR/FIN 2013), pages: 583-591, 2013, National Association for Surface Finishing
Presented at:
National Association for Surface Finishing Annual Conference and Trade Show

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

  PDF

Steam Assisted Accelerated Growth of Oxide Layer on Aluminium Alloys

Din, Rameez Ud ; Yuksel, Serkan ; Jellesen, Morten Stendahl ; Møller, Per ; Ambat, Rajan
part of: Proceedings of Eurocorr 2013, 2014, European Federation of Corrosion
Presented at:
European Corrosion Congress

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

2012
 

Allergic nickel dermatitis caused by playing the guitar: case report and assessment of nickel release from guitar strings.

Friis, Ulrik F. ; Menné, Torkil ; Jellesen, Morten Stendahl ; Møller, Per ; Verdingovas, Vadimas ; Jensen, Thomas R. ; Thyssen, Jacob Pontoppidan ; Johansen, Jeanne Duus
in: Contact Dermatitis, vol: 67, issue: 2, pages: 101-103

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2012

 

Characterization of a Cobalt-Tungsten Interconnect

Harthøj, Anders ; Holt, Tobias ; Caspersen, Michael ; Møller, Per
part of: Proceedings of 10th European SOFC Forum, pages: 21/118 - 34/118, 2012
Presented at:
10th European SOFC Forum

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2012

 

Effect of No-Clean Flux Residues on the Performance of Acrylic Conformal Coating in Aggressive Environments

Rathinavelu, Umadevi ; Jellesen, Morten S. ; Møller, Per ; Ambat, Rajan
in: I E E E Transactions on Components, Packaging and Manufacturing Technology, vol: 2, issue: 4, pages: 719-728

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2012     |    DOI: https://doi.org/10.1109/TCPMT.2012.2186456

 

Effect of pressurized steam on AA1050 aluminium

Jariyaboon, Manthana ; Møller, Per ; Ambat, Rajan
in: Anti-Corrosion Methods and Materials, vol: 59, issue: 3, pages: 103-109

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2012     |    DOI: https://doi.org/10.1108/00035591211224645

 

Factors affecting the wettability of different surface materials with vegetable oil at high temperatures and its relation to cleanability

Ashokkumar, Saranya ; Adler-Nissen, Jens ; Møller, Per
in: Applied Surface Science, vol: 263, pages: 86-94

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2012     |    DOI: https://doi.org/10.1016/j.apsusc.2012.09.002

 

Nickel may be released from laptop computers

Jensen, Peter ; Jellesen, Morten Stendahl ; Møller, Per ; Johansen, Jeanne Duus ; Liden, Carola ; Menne, Torkil ; Thyssen, Jacob Pontoppidan
in: Contact Dermatitis, vol: 67, issue: 6, pages: 384-385

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2012     |    DOI: https://doi.org/10.1111/j.1600-0536.2012.02162.x

2011
 

Effect of chloride impurities on the performance and durability of polybenzimidazole-based high temperature proton exchange membrane fuel cells

Ali, Syed Talat ; Li, Qingfeng ; Pan, Chao ; Jensen, Jens Oluf ; Nielsen, Lars Pleth (Invited author) ; Møller, Per
in: International Journal of Hydrogen Energy, vol: 36, issue: 2, pages: 1628-1636
Presented at:
The 3rd Annual Korea-USA Joint Symposium on Hydrogen & Fuel Cell Technologies

Type: Conference article (Peer reviewed)     |     Invited contribution

Status: Published     |    Year: 2011     |    DOI: https://doi.org/10.1016/j.ijhydene.2010.10.076

 

Electrochemical migration of tin in electronics and microstructure of the dendrites

Minzari, Daniel ; Grumsen, Flemming Bjerg ; Jellesen, Morten Stendahl ; Møller, Per ; Ambat, Rajan
in: Corrosion Science, vol: 53, issue: 5, pages: 1659-1669

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2011     |    DOI: https://doi.org/10.1016/j.corsci.2011.01.009

 

FIB-SEM investigation of trapped intermetallic particles in anodic oxide films on AA1050 aluminium

Jariyaboon, Manthana ; Møller, Per ; Dunin-Borkowski, Rafal E. ; Ambat, Rajan
in: Anti-Corrosion Methods and Materials, vol: 58, issue: 4, pages: 173-178

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2011     |    DOI: https://doi.org/10.1108/00035591111148885

 

Morphological study of silver corrosion in highly aggressive sulfur environments

Minzari, Daniel ; Jellesen, Morten Stendahl ; Møller, Per ; Ambat, Rajan
in: Engineering Failure Analysis, vol: 18, issue: 8, pages: 2126-2136

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2011     |    DOI: https://doi.org/10.1016/j.engfailanal.2011.07.003

 

On the electrochemical migration mechanism of tin in electronics

Minzari, Daniel ; Jellesen, Morten Stendahl ; Møller, Per ; Ambat, Rajan
in: Corrosion Science, vol: 53, issue: 10, pages: 3366-3379

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2011     |    DOI: https://doi.org/10.1016/j.corsci.2011.06.015

2010
 

A spot test for detection of cobalt release – early experience and findings

Thyssen, Jacob P. ; Menné, Torkil ; Johansen, Jeanne D. ; Lidén, Carola ; Julander, Anneli ; Møller, Per ; Jellesen, Morten Stendahl
in: Contact Dermatitis, vol: 63, issue: 2, pages: 63-69

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1111/j.1600-0536.2010.01749.x

 

Cleanability Evaluation of Different Surfaces by Fouling from Contact Frying of Foods

Ashokkumar, Saranya ; Raagaard Thomsen, Birgitte ; Hinke, Jens ; Møller, Per ; Adler-Nissen, Jens
part of: Fouling and Cleaning in Food Processing 2010, pages: 24-33, 2010, Cambridge University Press, UK
Presented at:
Fouling and Cleaning in Food Processing 2010

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2010

 

Cobalt release from inexpensive jewellery

Thyssen, Jacob Pontoppidan ; Jellesen, Morten Stendahl ; Menné, Torkil ; Lidén, Carola ; Julander, Anneli ; Møller, Per ; Johansen, Jeanne Duus
in: Contact Dermatitis, vol: 63, pages: 70-76

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1111/j.1600-0536.2010.01752.x

 

Corrosion failure due to flux residues in an electronic add-on device

Jellesen, Morten Stendahl ; Minzari, Daniel ; Rathinavelu, Umadevi ; Møller, Per ; Ambat, Rajan
in: Engineering Failure Analysis, vol: 17, issue: 6, pages: 1263-1272

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1016/j.engfailanal.2010.02.010

 

Influence of annealing and deformation on optical properties of ultra precision diamond turned and anodized 6060 aluminium alloy

Tabrizian-Ghalehno, Naja ; Hansen, Hans Nørgaard ; Hansen, P.E. ; Ambat, Rajan ; Møller, Per
in: Surface and Coatings Technology, vol: 204, issue: 16-17, pages: 2632-2638

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1016/j.surfcoat.2010.02.002

 

Influence of quartz particles on wear in vertical roller mills.

Jensen, Lucas R.D. ; Friis, Henrik ; Fundal, Erling ; Møller, Per ; Brockhoff, Per B. ; Jespersen, Mads
in: Minerals Engineering, vol: 23, issue: 5, pages: 390-398

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1016/j.mineng.2009.11.014

 

Influence of silver additions to type 316 stainless steels on bacterial inhibition, mechanical properties, and corrosion resistance

Chiang, Wen-Chi ; Tseng, I-Sheng ; Møller, Per ; Hilbert, Lisbeth Rischel ; Tolker-Nielsen, Tim ; Wu, Jiann-Kuo
in: Materials Chemistry and Physics, vol: 119, issue: 1-2, pages: 123-130

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1016/j.matchemphys.2009.08.035

  PDF

Investigation of Electronic Corrosion at Device Level

Jellesen, Morten Stendahl ; Minzari, Daniel ; Rathinavelu, Umadevi ; Møller, Per ; Ambat, Rajan
in: E C S Transactions, vol: 25, issue: 30, pages: 1-14
Presented at:
ECS Meeting : Corrosion of Electronic and Magnetic Materials

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1149/1.3321952

 

Mechanisms of electrochemical migration of tin by in-situ optical and electron microscopy

Minzari, Daniel ; Jellesen, Morten Stendahl ; Møller, Per ; Grumsen, Flemming Bjerg ; Mølhave, Kristian ; Jensen, Eric ; Ambat, Rajan
part of: Eurocorr 2010, 2010
Presented at:
EUROCORR 2010

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2010

 

On the application of thermodynamics of corrosion for service life design of concrete structures

Küter, Andre ; Geiker, Mette Rica ; Møller, Per
part of: Service Life Design for Infrastructure, pages: 637-644, 2010, RILEM Publications s.a.r.l., France
Presented at:
Service Life Design for Infrastructure

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2010

 

Prediction of wear rates in comminution equipment

Jensen, Lucas Roald Dörig ; Fundal, Erling ; Møller, Per ; Jespersen, Mads
in: Wear, vol: 269, issue: 7-8, pages: 525-533

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1016/j.wear.2010.05.007

 

Quantification of in situ temperature measurements on a PBI-based high temperature PEMFC unit cell

Lebæk, Jesper ; Ali, Syed Talat ; Møller, Per ; Mathiasen, Claus ; Nielsen, Lars Pleth ; Kær, Søren Knudsen
in: International Journal of Hydrogen Energy, vol: 35, issue: 18, pages: 9943-9953

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1016/j.ijhydene.2009.10.002

 

The effect of atmospheric corona treatment on AA1050 aluminium

Jariyaboon, Manthana ; Møller, Per ; Dunin-Borkowski, Rafal E. ; In, Su-il ; Chorkendorff, Ib ; Ambat, Rajan
in: Corrosion Science, vol: 52, issue: 6, pages: 2155-2163

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1016/j.corsci.2010.01.035

 

Thin film thermocouples for in situ membrane electrode assembly temperature measurements in a polybenzimidazole-based high temperature proton exchange membrane unit cell

Ali, Syed Talat ; Lebæk, Jesper ; Nielsen, Lars Pleth ; Mathiasen, Claus ; Møller, Per ; Kær, S.K.
in: Journal of Power Sources, vol: 195, issue: 15, pages: 4835-4841

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1016/j.jpowsour.2010.02.018

2009
 

CORROSION AND WEAR PROPERTIES OF MATERIALS USED FOR MINCED MEAT PRODUCTION

Jellesen, Morten Stendahl ; Hansen, Martin Otto Laver ; Hilbert, Lisbeth Rischel ; Møller, Per
in: Journal of Food Process Engineering, vol: 32, issue: 4, pages: 463-477

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2009     |    DOI: https://doi.org/10.1111/j.1745-4530.2007.00223.x

 

Effects of gold coating on experimental implant fixation

Zainali, Kasra ; Danscher, Gorm ; Jakobsen, Thomas ; Jakobsen, Stig S. ; Baas, Jørgen ; Møller, Per ; Bechtold, Joan E. ; Soballe, Kjeld
in: Journal of Biomedical Materials Research. Part A, vol: 88A, issue: 1, pages: 274-280

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2009     |    DOI: https://doi.org/10.1002/jbm.a.31924

  PDF

Electrochemical Migration on Electronic Chip Resistors in Chloride Environments

Minzari, Daniel ; Jellesen, Morten Stendahl ; Møller, Per ; Wahlberg, Pia ; Ambat, Rajan
in: I E E E Transactions on Device and Materials Reliability, vol: 9, issue: 3, pages: 392-402

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2009     |    DOI: https://doi.org/10.1109/TDMR.2009.2022631

 

Silver-Palladium Surfaces Inhibit Biofilm Formation

Chiang, Wen-Chi ; Schroll, Casper ; Hilbert, Lisbeth Rischel ; Møller, Per ; Tolker-Nielsen, Tim
in: Applied and Environmental Microbiology, vol: 75, issue: 6, pages: 1674-1678

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2009     |    DOI: https://doi.org/10.1128/AEM.02274-08

 

Unexpected corrosion of stainless steel in low chloride waters – microbial aspects

Hilbert, Lisbeth Rischel ; Carpén, Leena ; Møller, Per ; Fontenay, Frank ; Mathiesen, Troels
part of: EUROCORR 2009, 2009
Presented at:
EUROCORR 2009

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2009

2008
 

Bacterial inhibiting surfaces caused by the effects of silver release and/or electrical field

Chiang, Wen-Chi ; Hilbert, Lisbeth Rischel ; Schroll, Casper ; Tolker-Nielsen, Tim ; Møller, Per
in: Electrochimica Acta, vol: 54, issue: 1, pages: 108-115

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2008     |    DOI: https://doi.org/10.1016/j.electacta.2008.02.112

  PDF

Corrosion Reliability of Electronic Systems

Ambat, Rajan ; Jensen, Stine G. ; Møller, Per
in: E C S Transactions, vol: 6, issue: 24, pages: 17-28
Presented at:
ECS Meeting : Corrosion (General)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2008     |    DOI: https://doi.org/10.1149/1.2900650

 

Influence of microstructure of 6063 aluminium alloy on the appearance of anodized layer

Tabrizian-Ghalehno, Naja ; Møller, Per ; Ambat, Rajan ; Hansen, Hans Nørgaard
part of: European Corrosion Congress 2008, 2008, DECHEMA
Presented at:
European Corrosion Congress

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2008

 

Study of electroplated silver-palladium biofouling inhibiting coating

Chiang, Wen-Chi ; Hilbert, Lisbeth Rischel ; Schroll, Casper ; Tolker-Nielsen, Tim ; Møller, Per
in: Corrosion Engineering, Science and Technology, vol: 43, issue: 2, pages: 142-148

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2008     |    DOI: https://doi.org/10.1179/174327808X286392

 

Surface oxide formation during corona discharge treatment of AA 1050 aluminium surfaces

Minzari, Daniel ; Møller, Per ; Kingshott, Peter ; Christensen, Leif Højslet ; Ambat, Rajan
in: Corrosion Science, vol: 50, issue: 5, pages: 1321-1330

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2008     |    DOI: https://doi.org/10.1016/j.corsci.2008.01.023

2007
 

A New Approach for Biologically-Inhibiting Surfaces

Møller, Per ; Hilbert, Lisbeth Rischel ; Corfitzen, Charlotte B. ; Albrechtsen, Hans-Jørgen
in: Journal of Applied Surface Finishing, issue: 2, pages: 149-157

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2007

 

Complex process chains for manufacturing of invisible displays integrated in bulk metal panels

Hansen, Hans Nørgaard ; Prichystal, Jan ; Møller, Per ; Bladt, Henrik H.
in: Annals of CIRP, vol: 56/1, pages: 237-240

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2007     |    DOI: https://doi.org/10.1016/j.cirp.2007.05.056

 

Corrosion investigation of material combinations in a mobile phone dome-key pad system

Ambat, Rajan ; Møller, Per
in: Corrosion Science, vol: 49, issue: 7, pages: 2866-2879

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2007     |    DOI: https://doi.org/10.1016/j.corsci.2006.12.013

  PDF

In-situ Investigation of Lead-free Solder Alloy Formation Using a Hot-plate Microscope

Bergmann, René ; Tang, Peter Torben ; Hansen, Hans Nørgaard ; Møller, Per
part of: Proceedings of the 9th IEEE Electronics Packaging Technology Conference, 2007, IEEE
Presented at:
9th IEEE Electronics Packaging Technology Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2007     |    DOI: https://doi.org/10.1109/EPTC.2007.4469822

 

Micro-electrochemical machining of aluminium

Prichystal, Jan ; Hansen, Hans Nørgaard ; Møller, Per ; Luca, Macilotti ; Bladt, Henrik H.
part of: Proceedings ISEM XV - International symposium on electromachining, 2007, University of Nebraska-Lincoln, Nebraska
Presented at:
ISEM XV - International symposium on electromachining

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2007

  PDF

Pulse Reversal PermAlloy Plating Process for MEMS Applications

Smistrup, Kristian ; Tang, Peter Torben ; Møller, Per
in: E C S Transactions, vol: 3, issue: 25, pages: 179-189
Presented at:
ECS Meeting : Magnetic Materials Processes, and Devices 9

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2007     |    DOI: https://doi.org/10.1149/1.2753252

2006
  PDF

Corrosion and Environmental Effects on Electronic Systems

Ambat, Rajan ; Møller, Per ; Westermann, Peter Jacob Schwencke
part of: Meeting Abstracts - Electrochemical Society, pages: Abstract 800, 2006, The Electrochemical Society
Presented at:
ECS Meeting : D2 - Corrosion of Electronic Materials and Devices

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2006

 

Establishment of integrated information displays in aluminium surfaces using nanomanufacturing

Prichystal, Jan ; Hansen, Hans Nørgaard ; Bladt, Henrik H. ; Møller, Per
in: Institution of Mechanical Engineers. Proceedings. Part N: Journal of Nanoengineering and Nanosystems, vol: 220, issue: 3, pages: 151-156

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2006     |    DOI: https://doi.org/10.1243/17403499JNN89

 

Microstructure and thermal stability of nickel layers electrodeposited from an additive-free sulphamate-based electrolyte

Rasmussen, Anette Alsted ; Møller, Per ; Somers, Marcel A. J.
in: Surface and Coatings Technology, vol: 200, issue: 20-21, pages: 6037-6046

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2006

 

Nickel-containing coins: a health risk for nickel-sensitive individuals?

Jellesen, Morten Stendahl ; Hilbert, Lisbeth Rischel ; Møller, Per ; Ménne, Torkil
in: British Journal of Dermatology, vol: 155, issue: 6, pages: 1301

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2006

  PDF

Pulse Reversal PermAlloy Plating Process for MEMS Applications

Smistrup, Kristian ; Tang, Peter Torben ; Møller, Per
part of: Meeting Abstracts - Electrochemical Society, pages: Abstract 1673, 2006, The Electrochemical Society
Presented at:
213th ECS Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2006

 

Selective anodising technologies for obtaining translucent micro structures

Hansen, Hans Nørgaard ; Møller, Per ; Jarnov, Christian ; Staun, Jacob ; Prichystal, Jan Phuklin
part of: Towards synthesis of micro-/nano systems, pages: 175-180, 2006, Springer
Presented at:
11th international conference on precision engineering

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2006

 

Setup for combined electrochemical and friction testing during sliding wear

Jellesen, Morten Stendahl ; Hansen, Mikkel Østergaard ; Hilbert, Lisbeth Rischel ; Møller, Per
part of: Nordtrib 2006, 2006, DTU Tryk, Lyngby
Presented at:
Setup for combined electrochemical and friction testing during sliding wear

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2006

  PDF

The virtual classroom

Møller, Per ; Geiker, Mette Rica
part of: Knud Højgaard Conference, pages: 375-382, 2006, Technical University of Denmark, Department of Civil Engineering
Presented at:
Knud Højgaard Conference : Advanced Cement-Based Materials: Reserach and Training

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2006

2005
 

Corrosion of Steel in Concrete – Potential Monitoring and Electrochemical Impedance Spectroscopy during Corrosion Initiation and Propagation

Küter, Andre ; Mason, Thomas O. ; Geiker, Mette Rica ; Møller, Per
part of: Eurocorr 2005, The European Corrosion Congress, pages: 338-338, 2005, Rolo & Filhos Lda, Lisbon, Portugal
Presented at:
EUROCORR 2005

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2005

 

New trends for PWB surface finishes in mobile phone applications

Nielsen, Claus Würtz ; Ambat, Rajan ; Rasmussen, Anette Alsted ; Møller, Per
part of: Proceedings of Pan Pacific Microelectronic Symposium, 2006
Presented at:
Pan Pacific Microeletronics Symposium

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2005

 

The electrochemical deposition of tin-nickel alloys and the corrosion properties of the coating

Jellesen, Morten Stendahl ; Møller, Per
part of: AESF Sur / Fin, 2005
Presented at:
SUR/FIN Manufacturing and Technology Conference 2005

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2005

 

The electrochemical deposition of tin-nickel alloys and the corrosion properties of the coating

Jellesen, Morten Stendahl ; Møller, Per
in: Plating and Surface Finishing, vol: 92, issue: 10, pages: 36-41

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2005

2003
 

Acoustic streaming enhanced electrodeposition of nickel

Jensen, Jens Dahl ; Møller, Per
in: Chemical Physics Letters, vol: 368, issue: 5-6, pages: 732-737

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2003     |    DOI: https://doi.org/10.1016/S0009-2614(02)01917-6

 

Creation of Micro Products in the future - joining of materials as a key technology

Møller, Per ; Hansen, Hans Nørgaard
part of: JOM-11, 2003
Presented at:
International Conference on the Joining of Materials

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2003

  PDF

Electrochemical deposition of buried contacts in high-efficiency crystalline silicon photovoltaic cells

Jensen, Jens Arne Dahl ; Møller, Per ; Bruton, Tim ; Mason, Nigel ; Russell, Richard ; Hadley, John ; Verhoeven, Peter ; Matthewsone, Alan
in: Journal of The Electrochemical Society, vol: 150, issue: 1, pages: G49-G57

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2003     |    DOI: https://doi.org/10.1149/1.1528943

2002
 

Comparison of adhesion of the food spoilage bacterium Shewanella putrefaciens to stainless steel and silver surfaces

Hjelm, Mette ; Hilbert, Lisbeth Rischel ; Møller, Per ; Gram, Lone
in: Journal of Applied Microbiology, vol: 92, issue: 5, pages: 903-911

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2002     |    DOI: https://doi.org/10.1046/j.1365-2672.2002.01609.x

  PDF

Electrodeposition of CuInSe2

Lindberg, Martin ; Poulsen, Peter Behrensdorff ; Møller, Per
Presented at:
14th Workshop on Quantum Solar Energy Conversion

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2002

 

Influence of 1,3,6 naphthalene trisulfonic acid on microstructure & hardness in electrodeposited Ni-layers

Rasmussen, Anette Alsted ; Møller, Per ; Somers, Marcel A. J.
in: Plating and Surface Finishing, vol: 89, issue: 10, pages: 46-49

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2002

 

Microstructure & Other Properties of Pulse-Plated Copper for Electroforming Applications

Tang, Peter Torben ; Jensen, Jens Dahl ; Dam, H.C. ; Møller, Per
part of: SUR/FIN 2002, 2002, AESF
Presented at:
SUR/FIN Manufacturing and Technology Conference 2002

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2002

 

Mikroteknologiske Komponenter - udvikling af produkter og produktionsprocesser

Hansen, Hans Nørgaard ; Møller, Per
part of: ATV Semapp; Sprøjtestøbning af Miniature- og Mikrokomponenter, 2002
Presented at:
ATV Semapp; Sprøjtestøbning af Miniature- og Mikrokomponenter

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2002

2001
 

Galvanische Absheidung und Charakterisierung von Zink-Komposit-Schichten

Fontenay, Frank Le Sage De ; Andersen, Lasse Bøgede ; Møller, Per
in: Galvanotechnick, vol: 92, pages: [0 pp.]

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2001

 

Magnetoelastic Transducer Materials - a Plateable Possibility

Jensen, Jens Dahl ; Møller, Per
part of: SURFIN 2001, 2001, AESF
Presented at:
SUR/FIN Manufacturing and Technology Conference 2001

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2001

2000
 

Corrosion Resistance and Microstructure of Electrolytic Zinc Composite Coatings

Møller, Per ; Fontenay, Frank ; Andersen, Lasse Bøgede
part of: SUR/FIN 2000 (CD), 2000
Presented at:
SUR/FIN Manufacturing and Technology Conference 2000

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2000

 

Electroplating and Characterisation of Zinc Composite Coatings

Fontenay, ; Andersen, Lasse Bøgede ; Møller, Per
part of: Electroplating and Characterisation of Zinc Composite Coatings, 2000

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2000