Aminul Islam

Aminul Islam

Associate Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 306A

2800 Kgs. Lyngby

Ph.
Fax +4545 25 19 61
E-mail mais@mek.dtu.dk
ORCID 0000-0002-8275-6631
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2019
 

Comprehensive characterization and material modeling for ceramic injection molding simulation performance validations

Tosello, Guido ; Marhöfer, David Maximilian ; Islam, Aminul ; Müller, Tobias ; Plewa, Klaus ; Piotter, Volker
in: International Journal of Advanced Manufacturing Technology, vol: 102, pages: 225-240

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s00170-018-03251-3

 

Development of metal–graphene-filled hybrid composites: Characterization of mechanical, thermal, and electrical properties

Doagou Rad, Saeed ; Islam, Aminul ; Alnasser, Ammar
in: Journal of Composite Materials

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2019     |    DOI: https://doi.org/10.1177/0021998318812928

 

Injection Moulding Simulation and Validation of Thin Wall Components for Precision Applications

Islam, Aminul ; Li, Xiaoliu ; Wirska, Maja
part of: Advances in Manufacturing II, pages: 96-107, 2019, Springer
Presented at:
Sixth International Scientific-Technical Conference Manufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/978-3-030-16943-5_9

 

Investigation of conductive hybrid polymer composites reinforced with copper micro fibers and carbon nanotubes produced by injection molding

Doagou-Rad, Saeed ; Islam, Aminul ; Antusch, Steffen ; Jung, Judith ; Klein, Alexander ; Plewa, Klaus ; Piotter, Volker
in: Materials Today Communications

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.mtcomm.2019.100566

 

Multiscale molecular dynamics-FE modeling of polymeric nanocomposites reinforced with carbon nanotubes and graphene

Doagou-Rad, S. ; Jensen, J. S. ; Islam, A. ; Mishnaevsky Jr., Leon
in: Composite Structures, vol: 217, pages: 27-36

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.compstruct.2019.03.017

  PDF

Optimization of a self-peeling vat for precision vat photopolymerization setups

M. Ribo, Macarena ; Danielak, Anna H. ; Islam, Aminul ; Pedersen, David B.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 234-237, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Process chains for the mass production of transparent crowns for posterior teeth

Islam, Aminul ; Hansen, Hans Nørgaard ; Rabenow, Lisa ; Nielsen, Keld
in: CIRP annals, vol: 68, issue: 1, pages: 591-594

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.cirp.2019.04.015

2018
 

Characterisation of the Influence of the Colour in Resin for Micro Parts Production by Photopolymerisation Based Additive Manufacturing System

Danielak, Anna H. ; M. Ribo, Macarena ; Pedersen, David B. ; Islam, Aminul
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 64-69, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Correlation of mechanical and electrical properties with processing variables in MWCNT reinforced thermoplastic nanocomposites

Doagou-Rad, Saeed ; Islam, Aminul ; Jensen, Jakob Søndergaard
in: Journal of Composite Materials, vol: 52, issue: 26, pages: 3681–3697

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1177/0021998318768390

  PDF

Damping Behavior of Carbon Nanotube Reinforced Nanocomposites: Micromechanical Modeling and Experiments

Doagou-Rad, S. ; Jensen, J. S. ; Islam, A.
Presented at:
ECCM18 - 18th European Conference on Composite Materials

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Development of Highly Conductive Hybrid Composites

Islam, A. ; Rad, S. D.
Presented at:
P70 - Polymer Engineering International/ UK-China AMRI

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Direct fabrication of bio-inspired gecko-like geometries with vat polymerization additive manufacturing method

Davoudinejad, A. ; M. Ribo, M. ; Pedersen, D. B. ; Islam, A. ; Tosello, G.
in: Journal of Micromechanics and Microengineering, vol: 28

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1088/1361-6439/aabf17

  PDF

Effect of process parameters on flow length and flash formation in injection moulding of high aspect ratio polymeric micro features

Eladl, Abdelkhalik ; Mostafa, Rania ; Islam, Aminul ; Loaldi, Dario ; Soltan, Hassan ; Hansen, Hans N. ; Tosello, Guido
in: Micromachines, vol: 9, issue: 2

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3390/mi9020058

  PDF

Interaction of nanofillers in injection-molded graphene/carbon nanotube reinforced PA66 hybrid nanocomposites

Doagou-Rad, Saeed ; Islam, Aminul ; Jensen, Jakob S. ; Alnasser, Ammar
in: Journal of Polymer Engineering, vol: 38, issue: 10, pages: 971-981

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1515/polyeng-2018-0060

 

Multimaterial Micro Injection Molding

Islam, Aminul
part of: Micro Injection Molding, pages: 339-377, 2018, Carl Hanser Verlag, Munich

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3139/9781569906545.013

  PDF

Multimaterial Micro Injection Molding

Islam, Aminul
Presented at:
Micro Nano Molding Seminar, Book release & Reception – Technology and Applications

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Reproduction of multi-hierarchical structural surfaces by vat-photopolymerization

M. Ribo, M. ; Davoudinejad, A. ; Pedersen, D.B. ; Tosello, G. ; Islam, A.
Presented at:
Dedicated manufacturing and experimental techniques for acoustic metamaterials and acoustic treatments

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Systematic Analysis of the Effects of Moulding Conditions on the Properties of Shape Memory Polymers

Danielak, A. H. ; Islam, Aminul
in: A I P Conference Proceedings Series, vol: 2065
Presented at:
34th International Conference of the Polymer Processing Society

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1063/1.5088251

  PDF

The Present and Future Perspectives of Moulded Interconnect Device (MID) Technologies

Islam, Aminul
Presented at:
Printed Electronics Conference 2018

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2018

2017
  PDF

3D Printing of Bio-inspired surfaces

Méndez Ribó, Macarena ; Islam, Aminul
Presented at:
Wilhelm und Else Heraeus Seminar: Bio-inspired, Nano- and Microstructured Surfaces: New Functionality by Material and Structure

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2017

 

Biological features produced by additive manufacturing processes using vat photopolymerization method

Davoudinejad, Ali ; Mendez Ribo, Macarena ; Pedersen, David Bue ; Tosello, Guido ; Islam, Aminul
part of: Proceedings of the euspen Special Interest Group Meeting, 2017, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen Special Interest Group Meeting: Micro/Nano Manufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

Direct electroplating of plastic for advanced electrical applications

Islam, Aminul ; Hansen, Hans Nørgaard ; Tang, Peter Torben
in: C I R P Annals, vol: 66, issue: 1, pages: 209–212

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1016/j.cirp.2017.04.124

  PDF

Influence of Processing Conditions on the Mechanical Behavior of MWCNT Reinforced Thermoplastic Nanocomposites

Doagou Rad, Saeed ; Islam, Aminul ; Jensen, Jakob Søndergaard
in: Procedia CIRP, vol: 66, pages: 131-136
Presented at:
1st CIRP Conference On Composite Materials Parts Manufacturing

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1016/j.procir.2017.03.362

  PDF

Injection Moulding Simulation and Experimental Validation of Hearing Aid Shells

Islam, Aminul ; Li , Xiaoliu
Presented at:
33rd Annual Meeting of the Polymer Processing Society (PPS33)

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

Investigation of the mechanical properties of GNP/MWCNT reinforced PA66 hybrid nanocomposites

Doagou Rad, Saeed ; Islam, Aminul ; Søndergaard Jensen, Jacob
Presented at:
33rd International Conference of the Polymer Processing Society (PPS-33)

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2017

 

Multi-Scale Modeling of the Structural and Vibrational Behavior of Carbon Nanotube Reinforced Polymeric Nanocomposite Plates

Doagou Rad, Saeed ; Jensen, Jakob Søndergaard ; Islam, Aminul
part of: Proceedings of the sixth ECCOMAS Thematic Conference on the Mechanical Response of Composites, pages: 94-106, 2017, Eindhoven University of Technology
Presented at:
6th ECCOMAS Thematic Conference on the Mechanical Response of Composites (Composites 2017)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

Tolerances in micro manufacturing

Hansen, Hans Nørgaard ; Zhang, Yang ; Islam, Aminul
Presented at:
2017 World Congress on Micro and Nano Manufacturing (WCMNM 2017)

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2017

2016
  PDF

A conceptual framework for designing micro electrical connectors for hearing aid instruments

Doagou Rad, Saeed ; Islam, Aminul ; Fuglsang-Philip, M.
part of: Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016), pages: 4, 2016, Research Publishing Services
Presented at:
4M/IWMF 2016 Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

 

Experimental Investigation of Comparative Process Capabilities of Metal and Ceramic Injection Molding for Precision Applications

Islam, Aminul ; Giannekas, Nikolaos ; Marhöfer, David Maximilian ; Tosello, Guido ; Hansen, Hans Nørgaard
in: Journal of Micro and Nano-Manufacturing, vol: 4, issue: 3, pages: 1-9

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2016     |    DOI: https://doi.org/10.1115/1.4033820

  PDF

Feasibility study of injection mouldable conductive plastic for the hearing aid applications

Merca, Timea D.den ; Lindberg, Torbjörn ; Islam, Aminul
part of: Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016), pages: 4, 2016, Research Publishing Services
Presented at:
4M/IWMF 2016 Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

 

Gate Design in Injection Molding of Microfluidic Components Using Process Simulations

Marhöfer, David Maximilian ; Tosello, Guido ; Islam, Aminul ; Hansen, Hans Nørgaard
in: Journal of Micro and Nano-Manufacturing, vol: 4, issue: 2

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2016     |    DOI: https://doi.org/10.1115/1.4032302

  PDF

Influence of Process Temperatures on Blister Creation in Micro Film Insert Molding of a Dual Layer Membrane

Wöhner, Timo ; R. Whiteside, Ben ; Tosello, Guido ; Hansen, Hans Nørgaard ; Islam, Aminul
part of: Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016), pages: 51-54, 2016, Research Publishing Services
Presented at:
4M/IWMF 2016 Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016     |    DOI: https://doi.org/10.3850/978-981-11-0749-8 715

2015
 

A comparative study of metal and ceramic injection moulding for precision applications

Islam, Aminul ; Giannekas, Nikolaos ; Marhöfer, David Maximilian ; Tosello, Guido ; Hansen, Hans Nørgaard
part of: Proceedings of the 4M/ICOMM2015 Conference, pages: 567-570, 2015, Research Publishing Services
Presented at:
4M/ICOMM2015 Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.3850/978-981-09-4609-8_134

 

A Method for Dimensional and Surface Optical Measurements Uncertainty Assessment on Micro Structured Surfaces Manufactured by Jet-ECM

Quagliotti, Danilo ; Tosello, Guido ; Islam, Aminul ; Hansen, Hans Nørgaard ; Zeidler, H. ; Martin, A. ; Schubert, A. ; Brandao, C. ; Riemer, O.
part of: Proceedings of the 4M/ICOMM2015 Conference, pages: 554-557, 2015, Research Publishing Services
Presented at:
4M/ICOMM2015 Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.3850/978-981-09-4609-8_138

  PDF

Characterization method for blisters created in film insert moulding

Wöhner, Timo ; Hansen, Hans Nørgaard ; Tosello, Guido ; Islam, Aminul
part of: Proceedings of Euspen's 15th International Conference & Exhibition, 2015
Presented at:
15th International Conference of the European Society for Precision Engineering and Nanotechnology

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2015

 

Comparative analysis of different process simulation settings of a micro injection molded part featuring conformal cooling

Marhöfer, David Maximilian ; Tosello, Guido ; Islam, Aminul ; Hansen, Hans Nørgaard
part of: Proceedings of Euspen's 15th International Conference & Exhibition, pages: 65-66, 2015
Presented at:
15th International Conference of the European Society for Precision Engineering and Nanotechnology

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2015

 

D1.1 Product/Tool/Process Simulation Report for PoT Components

Marhöfer, Maximilian ; Tosello, Guido ; Islam, Aminul ; Wilson, Sandra ; Brask, Anders ; Kanaris, Athanassios ; Marson, Silvia ; Neal, Gareth ; van Eijk, Joost ; Qian, Jun ; Ziedler, Henning ; Martin, Ander ; Brandao, Carla ; Riemer, Oltmann ; Kuschel, Sven ; Geilert, Philip ; Vogelsang, Arne

Type: Report

Status: Published     |    Year: 2015

 

Gate design in injection molding of microfluidic components using process simulations

Marhöfer, D. M. ; Tosello, G. ; Islam, A. ; Hansen, H. N.
part of: Proceedings of the 4M/ICOMM2015 Conference, 2015, Research Publishing Services
Presented at:
4M/ICOMM2015 Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.3850/978-981-09-4609-8_136

  PDF

Gate design in injection molding of microfluidic components using process simulations

Marhöfer, David Maximilian ; Tosello, Guido ; Islam, Aminul ; Hansen, Hans Nørgaard
Presented at:
Micro/Nano Manufacturing Workshop

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2015

 

Mould Design and Material selection for Film Insert Moulding of Direct Methanol Fuel Cell Packaging

Wöhner, Timo ; Senkbeil, S. ; Olesen, T. L. ; Hansen, Hans Nørgaard ; Islam, Aminul ; Tosello, Guido
part of: Proceedings of the 4M/ICOMM2015 Conference, 2015, Research Publishing Services
Presented at:
4M/ICOMM2015 Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.3850/978-981-09-4609-8_066

  PDF

Optical micro-metrology of structured surfaces micro-machined by jet-ECM

Quagliotti, Danilo ; Tosello, Guido ; Islam, Aminul ; Hansen, Hans Nørgaard ; Zeidler, Henning ; Martin, André ; Schubert, Andreas ; Brandao, Carla ; Riemer, Oltmann
Presented at:
15th International Conference of the European Society for Precision Engineering and Nanotechnology

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2015

 

Optical micro-metrology of structured surfaces micro-machined by jet-ECM

Quagliotti, Danilo ; Tosello, Guido ; Islam, Aminul ; Hansen, Hans Nørgaard ; Zeidler, Henning ; Martin, André ; Schubert, Andreas ; Brandao, Carla ; Riemer, Oltmann
part of: Proceedings of the 15th International Conference of the european Society for Precision Engineering and Nanotechnology , 2015
Presented at:
15th International Conference of the European Society for Precision Engineering and Nanotechnology

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2015

 

Quality investigation of miniaturized Moulded Interconnect Devices (MIDs) for hearing aid applications

Islam, Aminul ; Hansen, Hans Nørgaard ; Giannekas, Nikolaos
in: C I R P Annals, vol: 64, issue: 1, pages: 539-544

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.1016/j.cirp.2015.03.003

  PDF

Validation of precision powder injection molding process simulations using a spiral test geometry

Marhöfer, Maximilian ; Müller, Tobias ; Tosello, Guido ; Islam, Aminul ; Hansen, Hans N. ; Piotter, Volker
part of: Proceedings of the Polymer Processing Society Conference 2015, 2015, American Institute of Physics
Presented at:
The Polymer Processing Society Conference 2015

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.1063/1.4965466

2014
  PDF

Experimental investigation on corrosion properties of LDS MID for Hearing Aid applications

Islam, Aminul ; Hansen, Hans Nørgaard ; Risager, Flemming ; Tang, P.T.
part of: ANTEC 2014 Conference Proceedings, 2014
Presented at:
ANTEC 2014 - The Plastics Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2014

  PDF

Experimental investigation on shrinkage and surface replication of injection moulded ceramic parts

Islam, Aminul ; Giannekas, Nikolaos ; Marhöfer, David Maximilian ; Tosello, Guido ; Hansen, Hans Nørgaard
part of: Proceedings of the 4th International Conference on Nanomanufacturing (nanoMan2014), 2014
Presented at:
4th International Conference on Nanomanufacturing (nanoMan 2014)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2014

 

Integrated Design, an Approach Towards DfµMA

Omidvarnia, Farzaneh ; Hansen, Hans Nørgaard ; Bissacco, Giuliano ; Islam, Aminul
part of: 13th International Design Conference - Design 2014, pages: 343-352, 2014, Design Society
Presented at:
13th International Design Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2014

  PDF

The Shrinkage Behavior and Surface Topographical Investigation for Micro Metal Injection Molding

Islam, Aminul ; Giannekas, Nikolaos ; Marhöfer, David Maximilian ; Tosello, Guido ; Hansen, Hans Nørgaard
in: A I P Conference Proceedings Series, vol: 1664, pages: 110007
Presented at:
30th International Conference of the Polymer Processing Society

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2014     |    DOI: https://doi.org/10.1063/1.4918482

2013
 

A comparative study on life cycle assessment of micro and macro components

Omidvarnia, Farzaneh ; Islam, Aminul ; Hansen, Hans Nørgaard ; Olsen, Stig Irving
in: International Journal of Advanced Manufacturing Technology, vol: 67, pages: 1171–1189

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: https://doi.org/10.1007/s00170-012-4557-6

  PDF

Advancements on the simulation of the micro injection moulding process

Marhöfer, David Maximilian ; Tosello, Guido ; Hansen, Hans Nørgaard ; Islam, Aminul
part of: Proceedings of the 10th International Conference on Multi-Material Micro Manufacture, 2013, 4M Association
Presented at:
4M 2013 International Conference on Multi-Material Micro Manufacture

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

 

Capability Handbook- offline metrology

Islam, Aminul ; Marhöfer, David Maximilian ; Tosello, Guido ; Hansen, Hans Nørgaard

Type: Book (Peer reviewed)

Status: Published     |    Year: 2013

  PDF

Effects of holding pressure and process temperatures on the mechanical properties of moulded metallic parts

Islam, Aminul ; Hansen, Hans Nørgaard ; Esteves, N.M. ; Rasmussen, T.T.
part of: ANTEC 2013 Conference Proceedings, 2013, Society of Plastics Engineers
Presented at:
ANTEC 2013

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

 

Handbook of LDS MID

Islam, Aminul ; Risager, Flemming

Type: Report

Status: Published     |    Year: 2013

 

Handbook of Plastic Welding

Islam, Aminul

Type: Book (Peer reviewed)

Status: Published     |    Year: 2013

  PDF

Improving the accuracy of micro injection moulding process simulations

Marhöfer, David Maximilian ; Tosello, Guido ; Islam, Aminul ; Hansen, Hans Nørgaard
Presented at:
EUSPEN Micro/Nano Manufacturing Workshop

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2013

 

Quality control and process capability assessment for injection-moulded micro mechanical parts

Gasparin, Stefania ; Tosello, Guido ; Hansen, Hans Nørgaard ; Islam, Aminul
in: International Journal of Advanced Manufacturing Technology, vol: 66, pages: 1295–1303

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: https://doi.org/10.1007/s00170-012-4407-6

 

Report on final demonstrator production and validation

Islam, Aminul

Type: Report

Status: Published     |    Year: 2013

 

Two-component injection moulding simulation of ABS-POM micro structured surfaces

Tosello, Guido ; Hansen, Hans Nørgaard ; Islam, Aminul
part of: Proceedings of the 13th euspen International Conference, pages: 47-50, 2013, The European Society for Precision Engineering and Nanotechnology
Presented at:
13th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

2012
 

8 Pin RIC Socket for Hearing Aid Applications

Islam, Aminul ; Hansen, Hans Nørgaard ; Davids, Søren ; Kristensen, Lars
part of: Proceedings of the 9th International Conference on Multi-Material Micro Manufacture, pages: 241-249, 2012, Research Publishing Services
Presented at:
9th International Conference on Multi-Material Micro Manufacture (4M2012)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2012     |    DOI: https://doi.org/10.3850/978-981-07-3353-7 325

 

Demonstrator realization with basic process

Islam, Aminul ; Albertin, Thomas

Type: Report (Peer reviewed)

Status: Published     |    Year: 2012

 

Experimental investigation of new manufacturing process chains to create micro-metal structures on polymer substrates for lab-on-chip sensors

Calaon, Matteo ; Islam, Aminul ; Hansen, Hans Nørgaard ; Ravn, Christian
in: International Journal of Advanced Manufacturing Technology, vol: 59, issue: 1-4, pages: 101-109

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2012     |    DOI: https://doi.org/10.1007/s00170-011-3468-2

  PDF

Packing parameters effect on injection molding of polypropylene nanostructured surfaces

Calaon, Matteo ; Tosello, Guido ; Hansen, Hans Nørgaard ; Ravn, C. ; Islam, Aminul
part of: Proceedings of the 70th Annual Technical Conference & Exhibition, 2012
Presented at:
70th Annual Technical Conference & Exhibition

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2012

 

Prototypes realization with high-risk process

Islam, Aminul ; Garcia, Ignacio

Type: Report (Peer reviewed)

Status: Published     |    Year: 2012

 

Prototypes realization with medium-risk process

Islam, Aminul

Type: Report (Peer reviewed)

Status: Published     |    Year: 2012

 

Report on prototypes characterization basic process

Islam, Aminul ; Esmoris, Jose Ignacio

Type: Report (Peer reviewed)

Status: Published     |    Year: 2012

 

Report on prototypes characterization medium-risk process, COTECH D7.3.2

Islam, Aminul ; Staemmler, Lutz

Type: Report (Peer reviewed)

Status: Published     |    Year: 2012

 

Report on prototypes characterization medium-risk process, COTECH D7.3.3

Padovani, Sara ; Islam, Aminul

Type: Report (Peer reviewed)

Status: Published     |    Year: 2012

  PDF

Two-component micro injection moulding for hearing aid applications

Islam, Aminul ; Hansen, Hans Nørgaard ; Marhöfer, David Maximilian ; Angel, Jais Andreas Breusch ; Dormann, B. ; Bondo, M.
in: International Journal of Advanced Manufacturing Technology, vol: 62, issue: 5-8, pages: 605-615

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2012     |    DOI: https://doi.org/10.1007/s00170-011-3841-1

2011
  PDF

A new pair of hard-soft plastic combination for precision manufacturing of two component plastic parts.

Islam, Aminul ; Hansen, Hans Nørgaard ; Marhöfer, David Maximilian ; Bondo, M.
part of: Proceedings of 11th International Conference of the European Society for Precision Engineering & Nano Technology, 2011, euspen
Presented at:
11th International Conference of the European Society for Precision Engineering and Nanotechnology

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2011

 

Demonstrator desing for high risk process

Islam, Aminul

Type: Report (Peer reviewed)

Status: Published     |    Year: 2011

  PDF

Effects of glass fibers on the properties of micro molded plastic parts

Islam, Aminul ; Hansen, Hans Nørgaard ; Gasparin, Stefania ; Bondo, M. (Invited author)
part of: ANTEC 2011 Conference, 2011, Society of Plastics Engineers
Presented at:
ANTEC 2011 Conference

Type: Article in proceedings (Peer reviewed)     |     Invited contribution

Status: Published     |    Year: 2011

  PDF

Effects of Glass Fibres on the Properties of Micro Moulded Plastic Parts

Islam, Aminul ; Hansen, Hans Nørgaard ; Gasparin, Stefania ; Bondo, M.
in: Commercial Micro Manufacturing Magazine, vol: 4, issue: 7

Type: Journal article

Status: Published     |    Year: 2011

 

Micro socket for signal carriage of a hearing instrument

Islam, Aminul
Presented at:
ATV Seminar COTECH-DTU

Type: Sound/Visual production (digital)

Status: Published     |    Year: 2011

2010
 

C-stop production by micro injection moulding

Islam, Aminul
Presented at:
ATV• SEMAPP/The Polymer- and MicroNano groups in cooperation with Dansk Maskinteknisk Selskab (DMS), IDA and the EU Network on Converging technologies for micro systems manufacturing - COTECH

Type: Sound/Visual production (digital)

Status: Published     |    Year: 2010

  PDF

Effects of moulding and environmental conditions on the mechanical and surface properties of injection moulded santoprene rubber

Islam, Aminul ; Ruby, Tobias M. ; Jessen, Rikke L.
Presented at:
Polymers in Process and Products

Type: Poster

Status: Published     |    Year: 2010

  PDF

Experimental investigation of the factors influencing the polymer-polymer bond strength during two-component injection moulding

Islam, Aminul ; Hansen, Hans Nørgaard ; Bondo, Martin
in: International Journal of Advanced Manufacturing Technology, vol: 50, issue: 1-4, pages: 101-111

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1007/s00170-009-2507-8

 

Report on converging insert moulding with µ-IM

Islam, Aminul

Type: Report (Peer reviewed)

Status: Published     |    Year: 2010

 

Tactile and visual perception of injection moulded plastic parts

Islam, Aminul ; Jensen, Jacob Tobias ; Akbas, Erkan ; Madsen, Mads

Type: Report

Status: Published     |    Year: 2010

 

Two Component Injection Moulding for Moulded Interconnect Devices

Islam, Aminul

Type: Book (Peer reviewed)

Status: Published     |    Year: 2010

 

Two-component microinjection moulding for MID fabrication

Islam, Aminul ; Hansen, Hans Nørgaard ; Tang, Peter Torben ; Jørgensen, M.B. ; Ørts, S.F.
in: Plastics, Rubber & Composites, vol: 39, issue: 7, pages: 300-307

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1179/174328910X12691245470356

2009
  PDF

2k micro moulding for MID fabrication

Islam, Aminul ; Hansen, Hans Nørgaard ; Jørgensen, Martin Bondo
part of: Polymer Process Engineering 09, pages: 273-293, 2009, University of Bradford, Bradford
Presented at:
Conference of polymer process engineering

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2009

  PDF

Examining the influence of injection speed and mould temperature on the tensile strength of polypropylene and ABS

Aarøe, Esben Raahede ; Blaimschein, Karl Stephan ; Deker, Lasse ; Stentoft-Christensen, Hans Christian ; Islam, Mohammad Aminul ; Hansen, Hans Nørgaard

Type: Report (Peer reviewed)

Status: Published     |    Year: 2009

  PDF

Physical masking process for integrating micro metallic structures on polymer substrate

Islam, Mohammad Aminul ; Hansen, Hans Nørgaard
part of: 9th International Conference of European Society of Precision Engineering and Nanotechnology, pages: 22-25, 2009, Euspen-Copy & Druck, Austria
Presented at:
10th International Conference of the European Society for Precision Engineering and Nanotechnology

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2009

 

Process chains for the manufacturing of moulded interconnect devices

Islam, Mohammad Aminul ; Hansen, Hans Nørgaard ; Tang, Peter Torben ; Sun, Jie
in: International Journal of Advanced Manufacturing Technology, vol: 42, issue: 9-10, pages: 831-841

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2009     |    DOI: https://doi.org/10.1007/s00170-008-1660-9

 

Report on best practice for micro/nano replication process data acquisition systems

Islam, Mohammad Aminul

Type: Report (Peer reviewed)

Status: Published     |    Year: 2009

 

Report on COTECH test procedure and characterization techniques

Islam, Mohammad Aminul ; Hansen, Hans Nørgaard

Type: Report (Peer reviewed)

Status: Published     |    Year: 2009

 

Report on process requirements

Islam, Mohammad Aminul ; Hansen, Hans Nørgaard (Supervisor)

Type: Report (Peer reviewed)

Status: Published     |    Year: 2009

 

Report on the benchmark of products & processes and ranking of cruciality and criticity

Islam, Aminul

Type: Report (Peer reviewed)

Status: Published     |    Year: 2009

  PDF

Two component injection moulding: Present and future perspectives

Islam, Aminul ; Hansen, Hans Nørgaard

Type: Net publication - Internet publication (Peer reviewed)

Status: Published     |    Year: 2009     |    DOI: https://doi.org/10.1002/spepro.000049

  PDF

Two component micro injection molding for MID fabrication

Islam, Mohammad Aminul ; Hansen, Hans Nørgaard ; Tang, Peter Torben
part of: ANTEC 2009 Annual Technical Conference, Chicago, Illinois USA, 2009, Chicago, Illinois USA
Presented at:
67th Annual Technical Conference of the Society Of Plastics Engineers 2009

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2009

2008
  PDF

Two component micro injection moulding for moulded interconnect devices

Islam, Aminul

Type: Ph.D. thesis

Status: Published     |    Year: 2008

 

Introduction of a new pair of thermoplastic materials for precision manufacturing of moulded interconnect devices.

Islam, Mohammad Aminul ; Hansen, Hans Nørgaard ; Tang, Peter Torben
part of: Proceedings of the European Society for Precision Engineering and Nanotechnology, pages: 555-559, 2008, Copy & Druck, Austria
Presented at:
10th International Conference of the European Society for Precision Engineering and Nanotechnology

Type: Article in proceedings

Status: Published     |    Year: 2008

 

Micro-MID Manufacturing By Two-Shot Injection Moulding

Islam, Mohammad Aminul ; Hansen, Hans Nørgaard ; Tang, Peter Torben
in: OnBoard Technology, vol: 9, issue: 2, pages: 10-13

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2008

 

Selective micro metallization of polymers for biomedical and medical application

Islam, Mohammad Aminul ; Hansen, Hans Nørgaard ; Tang, Peter Torben
Presented at:
Joint nano workshop of the DTU, TUM and TU Eindhoven

Type: Poster

Status: Published     |    Year: 2008