David Bue Pedersen

David Bue Pedersen

Senior Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 322

2800 Kgs. Lyngby

Ph.
Fax +4545 93 01 90
E-mail dbpe@mek.dtu.dk
ORCID 0000-0002-7013-7614
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2019
  PDF

Optimization of a self-peeling vat for precision vat photopolymerization setups

M. Ribo, Macarena ; Danielak, Anna H. ; Islam, Aminul ; Pedersen, David B.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 234-237, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Quality Assurance of Reference Specimens Manufactured by Continuous Liquid Interface Production Using Coordinate Metrology

Kain, M. ; Davoudinejad, A. ; Quagliotti, D. ; Nielsen, J. S. ; Liltorp, K. ; Pedersen, D. B. ; Farahani, S. D. ; Franke, N. ; Tosello, G.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 248-249, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Value chain and production cost optimization by integrating additive manufacturing in injection molding process chain

Tosello, Guido ; Charalambis, Alessandro ; Kerbache, Laoucine ; Mischkot, Michael ; Pedersen, David Bue ; Calaon, Matteo ; Hansen, Hans Nørgaard
in: International Journal of Advanced Manufacturing Technology, vol: 100, issue: 1-4, pages: 783–795

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s00170-018-2762-7

2018
 

A 5D DoF Parallel Kinematic Controler For Big Area Additive Manufacturing

Jensen, Mathias L. ; K. Kiewning, Malte ; Spangenberg, Jon ; Andersen, Sebastian B. ; Pedersen, David B. ; Hansen, Hans N.
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 167-171, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

A Beam Modulator and Galvanometer Controller for Metal Powder Bed Fusion

Andersen, Sebastian Aa. ; Del Rio, Sonia ; Pedersen, David Bue ; Hansen, Hans N.
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 172-177, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

Additive Manufacturing for Micro Tooling and Micro Part Rapid Prototyping

Davoudinejad, Ali ; Pedersen, David Bue ; Tosello, Guido
part of: Micro Injection Molding, pages: 289-313, 2018, Carl Hanser Verlag, Munich

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3139/9781569906545.011

  PDF

Additive manufacturing with vat polymerization method for precision polymer micro components production

Davoudinejad, Ali ; Péreza, Lucia C. Díaz ; Quagliotti, Danilo ; Pedersen, David Bue ; Garcíaa, José A. Albajez ; Yagüe-Fabra, José A. ; Tosello, Guido
in: Procedia CIRP, vol: 75, pages: 98-102
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.049

  PDF

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Zhang, Yang ; Pedersen, David Bue ; Mischkot, Michael ; Calaon, Matteo ; Baruffi, Federico ; Tosello, Guido
in: Journal of Visualized Experiments, vol: 138

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3791/57335

  PDF

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A. ; Charalambis, A. ; Zhang, Y. ; Calaon, M. ; Pedersen, D. B. ; Tosello, G. ; Hansen, H. N.
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, Ali ; Charalambis, Alessandro ; Tosello, Guido ; Zhang, Yang ; Calaon, Matteo ; Pedersen, David Bue ; Hansen, Hand Nørgaard
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 383-384 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018