Yang Zhang

Yang Zhang

Senior Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 323B

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 48 70
E-mail yazh@mek.dtu.dk
ORCID 0000-0002-0883-8233
Home page

Request a vCard via e-mail.

Publications
Projects
Activities
Courses
Loading

Publications rss feed

2019
  PDF

Simulation of thin features machining by micro end-milling using finite element modelling

Davoudinejad, Ali ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 120-121, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Study of the Distribution of Rubber Particles in Ground Tire Rubber/Polypropylene Blends

Basso, Alberto ; Zhang, Yang
Presented at:
12th International Conference on Composite Science and Technology

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

2018
  PDF

A method for the characterization of the reflectance of anisotropic functional surfaces

Regi, Francesco ; Nielsen, J B ; Li, Dongya ; Zhang, Y ; Frisvad, Jeppe Revall ; Aanæs, Henrik ; Tosello, Guido
in: Surface Topography: Metrology and Properties, vol: 6, issue: 3

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1088/2051-672X/aac373

  PDF

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Zhang, Yang ; Pedersen, David Bue ; Mischkot, Michael ; Calaon, Matteo ; Baruffi, Federico ; Tosello, Guido
in: Journal of Visualized Experiments, vol: 138

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3791/57335

  PDF

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A. ; Charalambis, A. ; Zhang, Y. ; Calaon, M. ; Pedersen, D. B. ; Tosello, G. ; Hansen, H. N.
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, Ali ; Charalambis, Alessandro ; Tosello, Guido ; Zhang, Yang ; Calaon, Matteo ; Pedersen, David Bue ; Hansen, Hand Nørgaard
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 383-384 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

A study of laser surface modification of polymers: A comparison in air and water

Marla, Deepak ; Andersen, Sebastian A. ; Zhang, Yang ; Hattel, Jesper H. ; Spangenberg, Jon
in: Journal of Manufacturing Processes, vol: 32, pages: 432-437

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.jmapro.2018.03.005

  PDF

Comparison of selected processes for surface microstructuring of complex mould for an implanted device

Zhang, Yang ; Hansen, Hans Nørgaard ; Bissacco, Giuliano ; Biondani, Francesco Giuseppe
in: International Journal of Advanced Manufacturing Technology, vol: 97, issue: 5-8, pages: 2741-2748

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1007/s00170-018-2152-1

  PDF

Dimensional Accuracy and Repeatability of 3D Printed Mould Inserts by DLP

Thorn, S. ; Bertelsen, J. G. ; M. Ribo, M. ; Li, D. ; Regi, F. ; Davoudinejad, A. ; Zhang, Y.
Presented at:
Euspen Special Interest Group Meeting 2018: Structured & Freeform Surfaces

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Dimensional Accuracy and Repeatability of Mould Inserts Manufactured by Mask Projection Vat-Photopolymerization

Bertelsen, J. G. ; Thorn, S. ; M. Ribo, M. ; Li, D. ; Regi, F. ; Davoudinejad, A. ; Zhang, Y. ; Tosello, G.
Presented at:
Euspen Special Interest Group Meeting 2018: Structured & Freeform Surfaces

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018