Marcin Piotr Serdeczny

Marcin Piotr Serdeczny

PhD student

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 225B

2800 Kgs. Lyngby

Ph.
Mobile
Fax +4545 25 19 61
E-mail mpse@mek.dtu.dk
ORCID 0000-0003-1691-773X
Home page

Request a vCard via e-mail.

Publications
Projects
DTU news
Loading

Publications rss feed

2019
 

Motion planning and numerical simulation of material deposition at corners in extrusion additive manufacturing

Comminal, Raphaël ; Serdeczny, Marcin P. ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 29

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.06.005

 

Numerical simulations of the mesostructure formation in material extrusion additive manufacturing

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 28, pages: 419-429

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.05.024

2018
 

Experimental validation of a numerical model for the strand shape in material extrusion additive manufacturing

Serdeczny, Marcin P. ; Comminal, Raphaël Benjamin ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 24, pages: 145-153

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.addma.2018.09.022

 

Measurements and simulations of the cross-section of the printed strands in fused filament fabrication

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 78-82, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Numerical Modeling of the Material Deposition and Contouring Precision in Fused Deposition Modeling

Comminal, R. ; Serdeczny, M. P. ; Pedersen, D. B. ; Spangenberg, J.
part of: Proceedings of the Annual International Solid Freeform Fabrication Symposium, pages: 1855-1864, 2018, Laboratory for Freeform Fabrication
Presented at:
29th Annual International Solid Freeform Fabrication Symposium (SFF Symp 2018)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

Numerical modeling of the strand deposition flow in extrusion-based additive manufacturing

Comminal, Raphaël ; Serdeczny, Marcin P. ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 20, pages: 68-76

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.addma.2017.12.013

  PDF

Numerical prediction of the porosity of parts fabricated with fused deposition modeling

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
part of: Proceedings of the Annual International Solid Freeform Fabrication Symposium, pages: 1849-1854, 2018, Laboratory for Freeform Fabrication
Presented at:
29th Annual International Solid Freeform Fabrication Symposium (SFF Symp 2018)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Numerical simulation of extrusion-based additive manufacturing - Effect of the nozzle geometry on the strand cross-section

Comminal, Raphaël ; Serdeczny, Marcin P. ; Pedersen, David B. ; Spangenberg, Jon
part of: Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology , pages: 285-286 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Numerical Study of the Impact of Shear Thinning Behaviour on the Strand Deposition Flow in the Extrusion-Based Additive Manufacturing

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 283-284 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018