DTU Mekanik
DTU Sundhedsteknologi
Mehdi Mehrali

Mehdi Mehrali

Postdoc

Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 222

2800 Kgs. Lyngby

Request a vCard via e-mail.

Publications
DTU news
Loading

Publications rss feed

2020
 

Effects of heat and pressure on hot-pressed geopolymer

Ranjbar, Navid ; Kashefi, Amin ; Ye, Guang ; Mehrali, Mehdi
in: Construction and Building Materials, vol: 231

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.conbuildmat.2019.117106

2019
  PDF

A Protein-Based, Water-Insoluble, and Bendable Polymer with Ionic Conductivity: A Roadmap for Flexible and Green Electronics

Kadumudi, Firoz Babu ; Jahanshahi, Mohammadjavad ; Mehrali, Mehdi ; Zsurzsan, Tiberiu-Gabriel ; Taebnia, Nayere ; Hasany, Masoud ; Mohanty, Soumyaranjan ; Knott, Arnold ; Godau, Brent ; Akbari, Mohsen ; Dolatshahi-Pirouz, Alireza
in: Advanced Science, vol: 6, issue: 5

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1002/advs.201801241

 

Enzymatic Crosslinked Gelatin 3D Scaffolds for Bone Tissue Engineering

Echave, Mari Carmen ; Pimenta-Lopes, Carolina ; Pedraz, José Luis ; Mehrali, Mehdi ; Dolatshahi-Pirouz, Alireza ; Ventura, Fransesc ; Orive, Gorka
in: INTERNATIONAL JOURNAL OF PHARMACEUTICS, vol: 562, pages: 151-161

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.ijpharm.2019.02.043

  PDF

Modelling of material deposition in big area additive manufacturing and 3D concrete printing

Comminal, Raphaël ; Serdeczny, Marcin Piotr ; Ranjbar, Navid ; Mehrali, Mehdi ; Pedersen, David Bue ; Stang, Henrik ; Spangenberg, Jon
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 151-154, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Pectin Methacrylate (PEMA) and Gelatin-Based Hydrogels for Cell Delivery: Converting Waste Materials into Biomaterials

Mehrali, Mehdi ; Thakur, Ashish ; Kadumudi, Firoz Babu ; Pierchala, Malgorzata Karolina ; Cordova, Julio Alvin Vacacela ; Shahbazi, Mohammad-Ali ; Mehrali, Mohammad ; Pennisi, Cristian Pablo ; Orive, Gorka ; Gaharwar, Akhilesh K. ; Dolatshahi-Pirouz, Alireza
in: ACS Applied Materials and Interfaces, vol: 11, issue: 13, pages: 12283-12297

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1021/acsami.9b00154

  PDF

Self-Healing Hydrogels: The Next Paradigm Shift in Tissue Engineering?

Talebian, Sepehr ; Mehrali, Mehdi ; Taebnia, Nayere ; Pennisi, Cristian Pablo ; Kadumudi, Firoz Babu ; Foroughi, Javad ; Hasany, Masoud ; Nikkhah, Mehdi ; Akbari, Mohsen ; Orive, Gorka ; Dolatshahi-Pirouz, Alireza
in: Advanced Science, vol: 6, issue: 16

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1002/advs.201801664

 

Silica nanoparticle surface chemistry: An important trait affecting cellular biocompatibility in two and three dimensional culture systems

Hasany, Masoud ; Taebnia, Nayere ; Yaghmaei, Soheila ; Shahbazi, Mohammad-Ali ; Mehrali, Mehdi ; Dolatshahi-Pirouz, Alireza ; Arpanaei, Ayyoob
in: Colloids and Surfaces B: Biointerfaces, vol: 182

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.colsurfb.2019.110353

 

Status and future scope of plant-based green hydrogels in biomedical engineering

Mohammadinejad, Reza ; Maleki, Hajar ; Larrañeta, Eneko ; Fajardo, André R. ; Nik, Amirala Bakhshian ; Shavandi, Amin ; Sheikhi, Amir ; Ghorbanpour, Mansour ; Farokhi, Mehdi ; Govindh, Praveen ; Cabane, Etienne ; Azizi, Susan ; Aref, Amir Reza ; Mozafari, Masoud ; Mehrali, Mehdi ; Thomas, Sabu ; Mano, João F. ; Mishra, Yogendra Kumar ; Thakur, Vijay Kumar
in: Applied Materials Today, vol: 16, pages: 213-246

Type: Review (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.apmt.2019.04.010

 

Sulfated polysaccharide-based scaffolds for orthopaedic tissue engineering

Dinoro, Jeremy ; Maher, Malachy ; Talebian, Sepehr ; Jarfarkhani, Mahboubeh ; Mehrali, Mehdi ; Orive, Gorka ; Foroughi, Javad ; Lord, Megan S. ; Dolatshahi-Pirouz, Alireza
in: Biomaterials, vol: 214

Type: Review (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.biomaterials.2019.05.025