Alberto Basso

Alberto Basso

PhD student

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 314

2800 Kgs. Lyngby

Ph.
Mobile
Fax +45 45 25 19 61
E-mail albass@mek.dtu.dk
ORCID 0000-0003-1167-7183
Home page

Request a vCard via e-mail.

Publications
Projects
Activities
Loading

Publications rss feed

2020
 

Influences of micro-ridges orientation and position on the replication of micro-structured surfaces by injection molding

Regi, Francesco ; Basso, Alberto ; Kain, Martin ; Loaldi, Dario ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
in: AIP Conference Proceedings, vol: 2205, issue: 1
Presented at:
35th International Conference of the Polymer Processing Society (PPS-35)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1063/1.5142928

 

Replication of micro-structured surfaces by integrating AM with PIM

Basso, Alberto ; Mendez Ribo, Macarena ; Christensen, Simon Emil ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
euspen's 20th International Conference & Exhibition

Type: Conference abstract for conference (Peer reviewed)

Status: Accepted/In press     |    Year: 2020

2019
  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 71-74, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

 

Study of the Distribution of Rubber Particles in Ground Tire Rubber/Polypropylene Blends

Basso, Alberto ; Zhang, Yang
Presented at:
12th International Conference on Composite Science and Technology

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019