Ali Davoudinejad

Ali Davoudinejad

Postdoc

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 322

2800 Kgs. Lyngby

Ph.
Fax +4545 25 19 61
E-mail alidav@mek.dtu.dk
ORCID 0000-0001-6564-6679

Request a vCard via e-mail.

Publications
Projects
Activities
Loading

Publications rss feed

2019
  PDF

Direct Fabrication of Microstructured Surfaces by Additive Manufacturing

Davoudinejad, A. ; Pedersen, D. B. ; Tosello, G.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 118-119, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Experimental investigation and thermo-mechanical modelling for tool life evaluation of photopolymer additively manufactured mould inserts in different injection moulding conditions

Davoudinejad, Ali ; Bayat, Mohamad ; Pedersen, David Bue ; Zhang, Yang ; Hattel, Jesper Henri ; Tosello, Guido
in: International Journal of Advanced Manufacturing Technology, vol: 102, issue: 1-4, pages: 403–420

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s00170-018-3163-7

  PDF

Fabrication of micro-structured surfaces by additive manufacturing, with simulation of dynamic contact angle

Davoudinejad, Ali ; Cai, Yukui ; Pedersen, David Bue ; Luo, Xichun ; Tosello, Guido
in: Materials & Design, vol: 176

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.matdes.2019.107839

  PDF

Geometrical shape assessment of additively manufactured features by Continuous Liquid Interface Production, vat photopolymerization method

Davoudinejad, A. ; Jessen, A. K. ; Farahani, S. D. ; Franke, N. ; Pedersen, D. B. ; Tosello, G.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 116-117, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Mechanical properties of additively manufactured die with numerical analysis in extrusion process

Davoudinejad, A. ; Bayat, M. ; Larsen, A. ; Pedersen, D. B. ; Hattel, J. H. ; Tosello, G.
in: A I P Conference Proceedings Series
Presented at:
35th International Conference of the Polymer Processing Society (PPS-35)

Type: Conference article (Peer reviewed)

Status: Accepted/In press     |    Year: 2019

  PDF

Optimization of corner micro end milling by finite element modelling for machining thin features

Davoudinejad, Ali ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
in: Procedia CIRP, vol: 82, pages: 362-367
Presented at:
17th CIRP Conference on Modelling of Machining Operations (CIRP CMMO)

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.procir.2019.04.158

  PDF

Quality Assurance of Reference Specimens Manufactured by Continuous Liquid Interface Production Using Coordinate Metrology

Kain, M. ; Davoudinejad, A. ; Quagliotti, D. ; Nielsen, J. S. ; Liltorp, K. ; Pedersen, D. B. ; Farahani, S. D. ; Franke, N. ; Tosello, G.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 248-249, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Simulation of thin features machining by micro end-milling using finite element modelling

Davoudinejad, Ali ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 120-121, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

2018
 

Additive Manufacturing for Micro Tooling and Micro Part Rapid Prototyping

Davoudinejad, Ali ; Pedersen, David Bue ; Tosello, Guido
part of: Micro Injection Molding, pages: 289-313, 2018, Carl Hanser Verlag, Munich

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3139/9781569906545.011

  PDF

Additive manufacturing with vat polymerization method for precision polymer micro components production

Davoudinejad, Ali ; Péreza, Lucia C. Díaz ; Quagliotti, Danilo ; Pedersen, David Bue ; Garcíaa, José A. Albajez ; Yagüe-Fabra, José A. ; Tosello, Guido
in: Procedia CIRP, vol: 75, pages: 98-102
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.049