Thomas Dahmen

Thomas Dahmen

PhD student

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 225

2800 Kgs. Lyngby

Fax +45 45 25 19 61
E-mail tdah@mek.dtu.dk
Home page

Request a vCard via e-mail.

Publications
Projects
Loading

Publications rss feed

2020
 

Characterization of channels made by laser powder bed fusion and binder jetting using X-ray CT and image analysis

Dahmen, T. ; Klingaa, C. G. ; Baier-Stegmaier, S. ; Lapina, A. ; Pedersen, D. B. ; Hattel, J. H.
in: Additive Manufacturing, vol: 36

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.addma.2020.101445

 

Investigation of the roughness variation along the length of LPBF manufactured straight channels

Klingaa, Christopher G. ; Dahmen, Thomas ; Baier-Stegmaier, Sina ; Mohanty, Sankhya ; Hattel, Jesper H.
in: Nondestructive Testing and Evaluation

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2020     |    DOI: https://doi.org/10.1080/10589759.2020.1785445

 
2019
  PDF

Additive manufacturing of metal components – process-material interaction in different process chains

Hansen, H. N. ; Hattel, J. H. ; Pedersen, D. B. ; Mohanty, S. ; Andersen, S. A. ; Nadimpalli, V. K. ; Klingaa, C. G. ; Dahmen, T. ; Zhang, Y.
in: I O P Conference Series: Materials Science and Engineering, vol: 580, issue: 1
Presented at:
40th Risø International Symposium on Material Science: Metal Microstructures in 2D, 3D, and 4D

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1088/1757-899x/580/1/012006

  PDF

Build orientation effects on the roughness of SLM channels

Klingaa, C. G. ; Dahmen, T. ; Baier, S. ; Mohanty, S. ; Hattel, J. H.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 111-114, 2019
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Methodology for geometric characterization and dimensioning of additively manufactured channels

Dahmen, T. ; Klingaa, C. G. ; Baier, S. ; Pedersen, D. B. ; Hattel, J. H.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 133-136, 2019
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Multi-material additive manufacturing of steels using laser powder bed fusion

Nadimpalli, Venkata Karthik ; Dahmen, Thomas ; Valente, Emilie Hørdum ; Mohanty, Sankhya ; Pedersen, David Bue
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 240-243, 2019
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019