Venkata Karthik Nadimpalli

Venkata Karthik Nadimpalli

Postdoc

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 322

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 19 61
E-mail vkna@mek.dtu.dk
ORCID 0000-0002-8464-3577
Home page

Request a vCard via e-mail.

Publications
Loading

Publications rss feed

2019
  PDF

Additive manufacturing of metal components – process-material interaction in different process chains

Hansen, H. N. ; Hattel, J. H. ; Pedersen, D. B. ; Mohanty, S. ; Andersen, S. A. ; Nadimpalli, V. K. ; Klingaa, C. G. ; Dahmen, T. ; Zhang, Y.
in: I O P Conference Series: Materials Science and Engineering, vol: 580, issue: 1
Presented at:
40th Risø International Symposium on Material Science: Metal Microstructures in 2D, 3D, and 4D

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1088/1757-899x/580/1/012006

  PDF

A method for identification and quantification of thermal lensing in powder bed fusion

Andersen, S. A. ; Valente, E. H. ; Nadimpalli, V. K. ; Hansen, H. N. ; Pedersen, D. B.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 230-233 , 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
19th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 19)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Influence of atmosphere on microstructure and nitrogen content in AISI 316L fabricated by laser‐based powder bed fusion

Valente, Emilie Hørdum ; Nadimpalli, Venkata Karthik ; Andersen, Sebastian Aagaard ; Pedersen, David Bue ; Christiansen, Thomas L. ; Somers, Marcel A. J.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 244-247, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Multi-material additive manufacturing of steels using laser powder bed fusion

Nadimpalli, Venkata Karthik ; Dahmen, Thomas ; Valente, Emilie Hørdum ; Mohanty, Sankhya ; Pedersen, David Bue
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 240-243, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019