David Bue Pedersen

David Bue Pedersen

Senior Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 322

2800 Kgs. Lyngby

Ph.
Fax +45 45 93 01 90
E-mail dbpe@mek.dtu.dk
ORCID 0000-0002-7013-7614
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2020
 

Characterization of near-zero pressure powder injection moulding with sacrificial mould by using fingerprint geometries

Zhang, Yang ; Basso, Alberto ; Christensen, Simon Emil ; Pedersen, David Bue ; Staal, Lasse ; Valler, Peter ; Hansen, Hans Nørgaard
in: CIRP annals

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.cirp.2020.04.052

 

Dimensional Evaluation of Additive Manufactured Polymer Extrusion Dies Produced by Continuous Liquid Interface Production

Turazza, A. ; Davoudinejad, A. ; Calaon, M. ; Pedersen, D. B. ; Tosello, G.
Presented at:
20th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 20)

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2020

  PDF

Implications of lattice structures on economics and productivity of metal powder bed fusion

Flores, Iñigo ; Kretzschmar, Niklas ; Azman, Abdul Hadi ; Chekurov, Sergei ; Pedersen, David Bue ; Chaudhuri, Atanu
in: Additive Manufacturing, vol: 31

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.addma.2019.100947

 

Mechanical properties of additively manufactured die with numerical analysis in extrusion process

Davoudinejad, A. ; Bayat, M. ; Larsen, A. ; Pedersen, D. B. ; Hattel, J. H. ; Tosello, G.
in: A I P Conference Proceedings Series, vol: 2205, issue: 1
Presented at:
35th International Conference of the Polymer Processing Society (PPS-35)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1063/1.5142921

 

Metal Additive Manufacturing of Multi-Material Dental Strut Implants

Kain, M. ; Nadimpalli, V. K. ; Miqueo, A. ; May, M. C. ; Yagüe-Fabra, J. A. ; Häfner, B. ; Pedersen, D. B. ; Calaon, M. ; Tosello, G.
Presented at:
20th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 20)

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2020

  PDF

Microstructure Control in 3D Printing with Digital Light Processing

Luongo, A. ; Falster, V. ; Doest, M. B. ; Ribo, M. M. ; Eiriksson, E. R. ; Pedersen, D. B. ; Frisvad, J. R.
in: Computer Graphics Forum, vol: 39, issue: 1, pages: 347-359

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1111/cgf.13807

 

Replication of micro-structured surfaces by integrating AM with PIM

Basso, Alberto ; Mendez Ribo, Macarena ; Christensen, Simon Emil ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
20th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 20)

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2020

 

Soft tooling process chain for the manufacturing of micro-functional features on molds used for molding of paper bottles

Saxena, Prateek ; Bissacco, Giuliano ; Meinert, Kenneth Ækær ; Danielak, Anna Halina ; Méndez Ribó, Macarena ; Pedersen, David Bue
in: Journal of Manufacturing Processes, vol: 54, pages: 129-137

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.jmapro.2020.03.008

2019
  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 71-74, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019