Jon Spangenberg

Jon Spangenberg

Associate Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 224

2800 Kgs. Lyngby

Ph.
Fax +4545 25 19 61
E-mail josp@mek.dtu.dk
ORCID 0000-0002-5411-6821
Home page

Request a vCard via e-mail.

Publications
Projects
Activities
Courses
Loading

Publications rss feed

2019
 

Analysing limitations of the FlowCyl as a one-point viscometer test for cement paste

Cepuritis, Rolands ; Skare, Elisabeth L. ; Ramenskiy, Evgeny ; Mørtsell, Ernst ; Smeplass, Sverre ; Li, Shizhao ; Jacobsen, Stefan ; Spangenberg, Jon
in: Construction and Building Materials, vol: 218, pages: 333-340

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.conbuildmat.2019.05.127

 

Motion planning and numerical simulation of material deposition at corners in extrusion additive manufacturing

Comminal, Raphaël ; Serdeczny, Marcin P. ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 29

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.06.005

 

Numerical simulations of the mesostructure formation in material extrusion additive manufacturing

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 28, pages: 419-429

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.05.024

 

Simulation of liquid composite moulding using a finite volume scheme and the level-set method

Sandberg, Michael ; Hattel, Jesper H. ; Spangenberg, Jon
in: International Journal of Multiphase Flow, vol: 118, pages: 183-192

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2019.06.014

  PDF

Simulation of resin-impregnation, heat-transfer and cure in a resin-injection pultrusion process

Sandberg, Michael ; Rasmussen, Filip S. ; Hattel, Jesper H. ; Spangenberg, Jon
in: AIP Conference Proceedings, vol: 2113, issue: 1

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1063/1.5112527

2018
 

A 5D DoF Parallel Kinematic Controler For Big Area Additive Manufacturing

Jensen, Mathias L. ; K. Kiewning, Malte ; Spangenberg, Jon ; Andersen, Sebastian B. ; Pedersen, David B. ; Hansen, Hans N.
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 167-171, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

A robustness analysis of the bonding process of joints in wind turbine blades

Spangenberg, J ; Uzal, A. ; Nielsen, M. W. ; Hattel, J. H.
in: International Journal of Adhesion and Adhesives, vol: 85, pages: 281-285

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.ijadhadh.2018.06.009

 

A study of laser surface modification of polymers: A comparison in air and water

Marla, Deepak ; Andersen, Sebastian A. ; Zhang, Yang ; Hattel, Jesper H. ; Spangenberg, Jon
in: Journal of Manufacturing Processes, vol: 32, pages: 432-437

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.jmapro.2018.03.005

  PDF

Decreasing the Magnitude of Shear Rates in the FlowCyl

Skare, Elisabeth Leite ; Jacobsen, Stefan ; Cepuritis, Rolands ; Smeplass, Sverre ; Spangenberg, Jon
Presented at:
12th fib International PhD Symposium in Civil Engineering

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018

 

Determination of Viscosity Versus Pressure by Means of a Clearance Seal

Christiansen, Peter ; Schmidt Hansen, Niels ; Lund, Martin Thomas Overdahl ; Spangenberg, Jon ; Bay, Niels Oluf
in: Journal of Tribology, vol: 140, issue: 3

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1115/1.4038579