Marcel A. J. Somers

Marcel A. J. Somers

Section head, Professor, Dr.ir.

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Materials and Surface Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 120

2800 Kgs. Lyngby

Ph.
Fax +4545 93 62 13
E-mail somers@mek.dtu.dk
ORCID 0000-0001-7773-1432
Home page

Request a vCard via e-mail.

Profile
Publications
Projects
Courses
CV
DTU news
Loading

Publications rss feed

2020
 

Effect of low-temperature surface hardening by carburization on the fatigue behavior of AISI 316L austenitic stainless steel

Peng, Yawei ; Liu, Zhe ; Chen, Chaoming ; Gong, Jianming ; Somers, Marcel A. J.
in: Materials Science and Engineering A, vol: 769

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.msea.2019.138524

2019
 

Breaking the Limit of Micro-Ductility in Oxide Glasses

Januchta, Kacper ; Stepniewska, Malwina ; Jensen, Lars Rosgaard ; Zhang, Yang ; Somers, Marcel A. J. ; Bauchy, Mathieu ; Yue, Yuanzheng ; Smedskjær, Morten Mattrup
in: Advanced Science

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2019     |    DOI: https://doi.org/10.1002/advs.201901281

 

Co-existence of γ'N phase and γN phase on nitrided austenitic Fe–Cr–Ni alloys- I. experiment

Che, H. L. ; Tong, S. ; Wang, K. S. ; Lei, M. K. ; Somers, Marcel A. J.
in: Acta Materialia, vol: 177, pages: 35-45

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.actamat.2019.07.019

  PDF

High and Low Temperature Surface Hardening of Martensitic Stainless Steels

Tibollo, Chiara ; Villa, Matteo ; Christiansen, Thomas L. ; Somers, Marcel A. J.
Presented at:
ESSC & DUPLEX 2019

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

High Temperature Solution Nitriding of Stainless Steels; Current Status and Future Trends

Christiansen, Thomas L. ; Villa, Matteo ; Tibollo, Chiara ; Dahl, Kristian V. ; Somers, Marcel A. J.
Presented at:
European Conference on Heat Treatment 2019

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Influence of atmosphere on microstructure and nitrogen content in AISI 316L fabricated by laser‐based powder bed fusion

Valente, Emilie Hørdum ; Nadimpalli, Venkata Karthik ; Andersen, Sebastian Aagaard ; Pedersen, David Bue ; Christiansen, Thomas L. ; Somers, Marcel A. J.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 244-247, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

New Developments in High Temperature Solution Nitriding of Stainless Steels

Christiansen, Thomas L. ; Villa, Matteo ; Tibollo, Chiara ; Dahl, Kristian V. ; Somers, Marcel A. J.
Presented at:
ESSC & DUPLEX 2019

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Observation of Crack-Free Vickers Indents at 500 N in Annealed Caesium Aluminoborate Glass

Januchta, K. ; Stepniewska, M. ; Yue, Yuanzheng ; Jensen, L. ; Zhang, Yang ; Munch, Steffen S. ; Somers, Marcel A. J. ; Smedskjær, Morten Mattrup
Presented at:
25th International Congress on Glass

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

On the Influence of Deep Cryogenic Treatment on Tempering Transformations in AISI D2 Steels

Pellizzari, Massimo ; Menegante, Vasco ; Villa, Matteo ; Somers, Marcel A. J.
Presented at:
26th IFHTSE Congress of Heat Treatment and Surface Engineering

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Residual stress determination in oxidized bulk metallic glass using X-ray diffraction and FIB/DIC methods

Haratian, S. ; Niessen, F. ; Grumsen, F. B. ; Villa, M. ; Christiansen, T. L. ; Somers, M. A. J.
Presented at:
26th International Symposium on
Metastable, Amorphous and Nanostructured Materials (ISMANAM 2019)

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019