Matteo Calaon

Matteo Calaon

Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 322

2800 Kgs. Lyngby

Ph.
Fax +4545 93 01 90
E-mail mcal@mek.dtu.dk
ORCID 0000-0002-9437-9829
Home page

Request a vCard via e-mail.

Publications
Projects
Activities
DTU news
Loading

Publications rss feed

2019
  PDF

Dimensional and Form Characterization of a Benchmarking Specimen Subjected to Different Post‐Processing Technologies for Metal Additive Manufacturing

Kain, M. ; Loaldi, D. ; Davoudinejad, A. ; Calaon, M. ; Vedel-Smith, N. K. ; Haahr‐Lillevang, L. ; Pedersen, D. B. ; Tosello, G.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Micro product and process fingerprints for zero-defect net-shape micromanufacturing

Tosello, Guido ; Gulcur, Mert ; Whiteside, Ben ; Coates, Phil ; Luca, Antonio ; Vinícius, Pablo ; Lia, De Sousa ; Riemer, Oltmann ; Danilov, Igor ; Zanjani, Matin Yahyavi ; Hackert-Oschätzchen, Matthias ; Schubert, Andreas ; Baruffi, Federico ; Achour, Soufian Ben ; Calaon, Matteo ; Nielsen, Chris Valentin ; Bissacco, Giuliano ; Cannella, Emanuele ; Rasmussen, Anette ; Bellotti, Mattia ; Saxena, Krishna ; Qian, Jun ; Reynaerts, Dominiek ; Syam, Wahyudin ; Leach, Richard ; Kose, Sandeep Kuria ; Parenti, Paolo ; Annoni, Massimiliano ; Cai, Yukui ; Luo, Xichun ; Qin, Yi ; Zeidler, Henning
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 98-99, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Quantitative depth evaluation of microgrooves on polymer material beyond the diffraction limit

Ye, Shiwei ; Takahashi, Satoru ; Michihata, Masaki ; Takamasu, Kiyoshi ; Hansen, Hans Nørgaard ; Calaon, Matteo
in: Precision Engineering, vol: 59, pages: 56-65

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.precisioneng.2019.05.016

 

Tapping AFM measurements artefacts in the acquisition of high-aspect-ratio rectangular nanostructures using dedicated sharp tips

Loaldi, Dario ; Quagliotti, Danilo ; Calaon, Matteo ; Czolkos, Ilja ; Johansson, Alicia ; Nielsen, Theodor ; Garnaes, Jørgen ; Tosello, Guido
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 336-337, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
19th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 19)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Tapping AFM measurements artefacts in the acquisition of high-aspect-ratio rectangular nanostructures using dedicated sharp tips

Loaldi, Dario ; Quagliotti, Danilo ; Calaon, Matteo ; Czolkos, Ilja ; Johansson, Alicia ; Nielsen, Theodor ; Garnaes, Jørgen ; Tosello, Guido
Presented at:
19th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 19)

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Value chain and production cost optimization by integrating additive manufacturing in injection molding process chain

Tosello, Guido ; Charalambis, Alessandro ; Kerbache, Laoucine ; Mischkot, Michael ; Pedersen, David Bue ; Calaon, Matteo ; Hansen, Hans Nørgaard
in: International Journal of Advanced Manufacturing Technology, vol: 100, issue: 1-4, pages: 783–795

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s00170-018-2762-7

2018
  PDF

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Zhang, Yang ; Pedersen, David Bue ; Mischkot, Michael ; Calaon, Matteo ; Baruffi, Federico ; Tosello, Guido
in: Journal of Visualized Experiments, vol: 138

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3791/57335

  PDF

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A. ; Charalambis, A. ; Zhang, Y. ; Calaon, M. ; Pedersen, D. B. ; Tosello, G. ; Hansen, H. N.
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, Ali ; Charalambis, Alessandro ; Tosello, Guido ; Zhang, Yang ; Calaon, Matteo ; Pedersen, David Bue ; Hansen, Hand Nørgaard
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 383-384 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Comparison of micro and conventional injection moulding based on process precision and accuracy

Baruffi, Federico ; Charalambis, Alessandro ; Calaon, Matteo ; Elsborg, René ; Tosello, Guido
in: Procedia CIRP, vol: 75, pages: 149-154
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.046