Sebastian Aagaard Andersen

Sebastian Aagaard Andersen

PhD student

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 314

2800 Kgs. Lyngby

Ph.
Mobile
Fax +4545 25 19 61
E-mail seaa@mek.dtu.dk
ORCID 0000-0002-7115-0538
Home page

Request a vCard via e-mail.

Publications
Projects
Loading

Publications rss feed

2019
  PDF

Influence of atmosphere on microstructure and nitrogen content in AISI 316L fabricated by laser‐based powder bed fusion

Valente, Emilie Hørdum ; Nadimpalli, Venkata Karthik ; Andersen, Sebastian Aagaard ; Pedersen, David Bue ; Christiansen, Thomas L. ; Somers, Marcel A. J.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 244-247, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

2018
 

A 5D DoF Parallel Kinematic Controler For Big Area Additive Manufacturing

Jensen, Mathias L. ; K. Kiewning, Malte ; Spangenberg, Jon ; Andersen, Sebastian B. ; Pedersen, David B. ; Hansen, Hans N.
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 167-171, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

A Beam Modulator and Galvanometer Controller for Metal Powder Bed Fusion

Andersen, Sebastian Aa. ; Del Rio, Sonia ; Pedersen, David Bue ; Hansen, Hans N.
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 172-177, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

A study of laser surface modification of polymers: A comparison in air and water

Marla, Deepak ; Andersen, Sebastian A. ; Zhang, Yang ; Hattel, Jesper H. ; Spangenberg, Jon
in: Journal of Manufacturing Processes, vol: 32, pages: 432-437

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.jmapro.2018.03.005

2017
 

A perfomance assesment of a 2 axis scanning mirror galvanometer for powder bed fusion

Pedersen, David Bue ; Andersen, Sebastian Aagaard ; Nielsen, Jakob Skov ; Eiríksson, Eyþór Rúnar ; Nielsen, Jannik Boll ; Wilm, Jakob ; Aanæs, Henrik ; Hansen, Hans Nørgaard
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE, 2017, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen and ASPE Special Interest Group Meeting: Additive Manufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

Considerations on the Construction of a Powder Bed Fusion Platform for Additive Manufacturing

Andersen, Sebastian Aagaard ; Nielsen, Karl-Emil ; Pedersen, David Bue ; Nielsen, Jakob Skov
in: Physics Procedia, vol: 89, pages: 3-10
Presented at:
Nordic Laser Materials Processing Conference (NOLAMP16)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1016/j.phpro.2017.08.004