Filip Salling Rasmussen

Filip Salling Rasmussen

PhD student

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 225

2800 Kgs. Lyngby

Ph.
Fax +4545 25 19 61
E-mail fsras@mek.dtu.dk
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
Loading

Publications rss feed

2019
  PDF

A Characterization Study Relating Cross-Sectional Distribution of Fiber Volume Fraction and Permeability

Rasmussen, Filip S. ; Sonne, Mads R. ; Larsen, Martin ; Mikkelsen, Lars P. ; Hattel, Jesper H.
part of: Proceedings of 22nd International Conference on Composite Materials, 2019
Presented at:
22nd International Conference on Composite Materials 2019

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Fiber segmentation from 3D X-ray computed tomography of composites with continuous textured glass fibre yarns

Rasmussen, Filip Salling ; Emerson, Monica Jane ; Sonne, Mads Rostgaard ; Hattel, Jesper Henri ; Mikkelsen, Lars Pilgaard ; Dahl, Vedrana Andersen
part of: Proceedings of 2019 International Conference on Tomography of Materials & Structures, 2019
Presented at:
2019 International Conference on Tomography of Materials & Structures

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Simulation of resin-impregnation, heat-transfer and cure in a resin-injection pultrusion process

Sandberg, Michael ; Rasmussen, Filip S. ; Hattel, Jesper H. ; Spangenberg, Jon
in: AIP Conference Proceedings, vol: 2113, issue: 1

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1063/1.5112527

2018
  PDF

Meso-Scale Process Modelling Strategies for Pultrusion of Unidirectional Profiles

Yuksel, Onur ; Baran, Ismet ; Rasmussen, Filip Salling ; Spangenberg, Jon ; Ersoy, Nuri ; Hattel, Jesper H. ; Akkerman, Remko
Presented at:
ECCM18 - 18th European Conference on Composite Materials

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Modelling the Effect of Non-Uniform Fibre Distribution on the Curing Behaviour in Resin Injection Pultrusion

Rasmussen, Filip S. ; Klingaa, Christopher G. ; Larsen, Martin ; Sonne, Mads R. ; Spangenberg, Jon ; Hattel, Jesper H.
Presented at:
ECCM18 - 18th European Conference on Composite Materials

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018

2017
  PDF

2D Numerical Modelling of the Resin Injection Pultrusion Process Including Experimental Resin Kinetics and Temperature Validation

Rasmussen, Filip Salling ; Sonne, Mads Rostgaard ; Larsen, Martin ; Spangenberg, Jon ; Lilleheden, Lars T. ; Hattel, Jesper Henri
Presented at:
21st International Conference on Composite Materials (ICCM-21)

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

The effect of saturation on resin flow in injection pultrusion: a preliminary numerical study

Spangenberg, Jon ; Larsen, Martin ; R. Rodríguez, Rosa ; M. M. Sánchez, Pablo ; Rasmussen, Filip S. ; Sonne, Mads Rostgaard ; Hattel, Jesper Henri
Presented at:
21st International Conference on Composite Materials (ICCM-21)

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2017