Christopher Gottlieb Klingaa

Christopher Gottlieb Klingaa

PhD student

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 225

2800 Kgs. Lyngby

Home page

Request a vCard via e-mail.

Publications
Projects
Courses
Loading

Publications rss feed

2019
  PDF

Additive manufacturing of metal components – process-material interaction in different process chains

Hansen, H. N. ; Hattel, J. H. ; Pedersen, D. B. ; Mohanty, S. ; Andersen, S. A. ; Nadimpalli, V. K. ; Klingaa, C. G. ; Dahmen, T. ; Zhang, Y.
in: I O P Conference Series: Materials Science and Engineering, vol: 580, issue: 1
Presented at:
40th Risø International Symposium on Material Science: Metal Microstructures in 2D, 3D, and 4D

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1088/1757-899x/580/1/012006

  PDF

Build orientation effects on the roughness of SLM channels

Klingaa, C. G. ; Dahmen, T. ; Baier, S. ; Mohanty, S. ; Hattel, J. H.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 111-114, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Methodology for geometric characterization and dimensioning of additively manufactured channels

Dahmen, T. ; Klingaa, C. G. ; Baier, S. ; Pedersen, D. B. ; Hattel, J. H.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 133-136, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Roughness Investigation of SLM Manufactured Conformal Cooling Channels Using X-ray Computed Tomography

Klingaa, Christopher G. ; Bjerre, Mathias K. ; Baier, Sina ; De Chiffre, Leonardo ; Mohanty, Sankhya ; Hattel, Jesper H.
part of: Proceedings of the 9th Conference on Industrial Computed Tomography, Padova, Italy (iCT 2019), 2019
Presented at:
9th Conference on Industrial Computed Tomography (ICT2019)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

2018
  PDF

Modelling the Effect of Non-Uniform Fibre Distribution on the Curing Behaviour in Resin Injection Pultrusion

Rasmussen, Filip S. ; Klingaa, Christopher G. ; Larsen, Martin ; Sonne, Mads R. ; Spangenberg, Jon ; Hattel, Jesper H.
Presented at:
ECCM18 - 18th European Conference on Composite Materials

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018