Sankhya Mohanty

Sankhya Mohanty

Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 217

2800 Kgs. Lyngby

Ph.
Mobile
Fax +4545 25 19 61
E-mail samoh@mek.dtu.dk
ORCID 0000-0002-1142-0989
Home page

Request a vCard via e-mail.

Publications
Projects
DTU news
Loading

Publications rss feed

2019
 

A systematic investigation of the effects of process parameters on heat and fluid flow and metallurgical conditions during laser-based powder bed fusion of Ti6Al4V alloy

Bayat, Mohamad ; Mohanty, Sankhya ; Hattel, Jesper Henri
in: International Journal of Heat and Mass Transfer, vol: 139, pages: 213-230

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.05.017

  PDF

Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation

Bayat, Mohamad ; Thanki, Aditi ; Mohanty, Sankhya ; Witvrouw, Ann ; Yang, Shoufeng ; Thorborg, Jesper ; Skat Tiedje, Niels ; Hattel, Jesper Henri
in: Additive Manufacturing

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.100835

  PDF

Multi-material additive manufacturing of steels using laser powder bed fusion

Nadimpalli, Venkata Karthik ; Dahmen, Thomas ; Valente, Emilie Hørdum ; Mohanty, Sankhya ; Pedersen, David Bue
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 240-243, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF

Bayat, Mohamad ; Mohanty, Sankhya ; Hattel, Jesper Henri
in: International Journal of Heat and Mass Transfer, vol: 139, pages: 95-114

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.05.003

 

Resistor-capacitor approach for modelling of temperature and humidity response inside electronic enclosures

Staliulionis, Z. ; Mohanty, S. ; Hattel, J. H.
part of: 2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2019), 2019, IEEE
Presented at:
20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1109/EuroSimE.2019.8724538

  PDF

Roughness Investigation of SLM Manufactured Conformal Cooling Channels Using X-ray Computed Tomography

Klingaa, Christopher G. ; Bjerre, Mathias K. ; Baier, Sina ; De Chiffre, Leonardo ; Mohanty, Sankhya ; Hattel, Jesper H.
part of: Proceedings of the 9th Conference on Industrial Computed Tomography, Padova, Italy (iCT 2019), 2019
Presented at:
9th Conference on Industrial Computed Tomography (ICT2019)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

2018
  PDF

A new design for an extensive benchmarking of additive manufacturing machines

Moshiri, Mandaná ; Tosello, Guido ; Mohanty, Sankhya
part of: Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology , pages: 261-262 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Defects investigation in additively manufactured steel products for injection moulding

Moshiri, Mandaná ; Tosello, Guido ; Mohanty, Sankhya
part of: Euro PM2018 Proceedings , 2019, European Powder Metallurgy Association
Presented at:
EURO PM2018

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

Humidity build-up in electronic enclosures exposed to different geographical locations by RC modelling and reliability prediction

Conseil-Gudla, H. ; Staliulionis, Z. ; Mohanty, S. ; Jellesen, M. S. ; Hattel, J. H. ; Ambat, R.
in: Microelectronics Reliability, vol: 82, pages: 136-146

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.microrel.2018.01.013