Danilo Quagliotti

Danilo Quagliotti

Postdoc

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 306A

2800 Kgs. Lyngby

Ph.
Fax +4545 25 19 61
E-mail danqua@mek.dtu.dk
ORCID 0000-0002-8347-2884
Home page

Request a vCard via e-mail.

Publications
Projects
Activities
Courses
DTU news
Loading

Publications rss feed

2019
  PDF

Quality Assurance of Reference Specimens Manufactured by Continuous Liquid Interface Production Using Coordinate Metrology

Kain, M. ; Davoudinejad, A. ; Quagliotti, D. ; Nielsen, J. S. ; Liltorp, K. ; Pedersen, D. B. ; Farahani, S. D. ; Franke, N. ; Tosello, G.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 248-249, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Tapping AFM measurements artefacts in the acquisition of high-aspect-ratio rectangular nanostructures using dedicated sharp tips

Loaldi, Dario ; Quagliotti, Danilo ; Calaon, Matteo ; Czolkos, Ilja ; Johansson, Alicia ; Nielsen, Theodor ; Garnaes, Jørgen ; Tosello, Guido
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 336-337, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
19th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 19)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

2018
  PDF

Additive manufacturing with vat polymerization method for precision polymer micro components production

Davoudinejad, Ali ; Péreza, Lucia C. Díaz ; Quagliotti, Danilo ; Pedersen, David Bue ; Garcíaa, José A. Albajez ; Yagüe-Fabra, José A. ; Tosello, Guido
in: Procedia CIRP, vol: 75, pages: 98-102
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.049

  PDF

Evaluation of injection pressure as a process fingerprint for Injection and Injection Compression Molding of micro structured optical components

Loaldi, Dario ; Calaon, Matteo ; Quagliotti, Danilo ; Parenti, Paolo ; Annoni, Massimiliano ; Tosello, Guido
Presented at:
Euspen Special Interest Group Meeting 2018: Structured & Freeform Surfaces

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Geometrical and feature of size design effect on direct stereolithography micro additively manufactured components

Davoudinejad, A. ; Diaz Péreza, L. C. ; Quagliotti, D. ; Pedersen, D. B. ; Albajez Garcíaa, J. A. ; Yagüe-Fabra, J. A. ; Tosello, G.
in: Procedia Structural Integrity, vol: 13, pages: 1250-1255
Presented at:
22nd European Conference on Fracture (ECF22)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.prostr.2018.12.256

  PDF

Geometrical shape assessment of additively manufactured features by direct light processing vat polymerization method

Péreza, Lucia C. Díaz ; Davoudinejad, Ali ; Quagliotti, Danilo ; Pedersen, David Bue ; Garcíaa, José A. Albajez ; Yagüe-Fabraa, José A. ; Tosello, Guido
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 277-278 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

Geometric and Fature Size Design Effect on Vat Photopolymerization Micro Additively Manufactured Surface Deatures

Davoudinejad, A. ; Péreza, L. C. Díaz ; Quagliotti, D. ; Pedersen, David B. ; Garcíaa, José A. Albajez ; Yagüe-Fabra, José A. ; Tosello, G.
part of: Proceedings of the Joint Special Interest Group meeting: Additive Manufacturing, pages: 5, 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Manufacturing Signatures of Injection Molding and Injection Compression Molding for Micro-Structured Polymer Fresnel Lens Production

Loaldi, Dario ; Quagliotti, Danilo ; Calaon, Matteo ; Parenti, Paolo ; Annoni, Massimiliano ; Tosello, Guido
in: Micromachines, vol: 9, issue: 12

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3390/mi9120653

 

Metrological Quality Assurance in Micro Injection Molding

Quagliotti, Danilo ; Calaon, Matteo ; Tosello, Guido
part of: Micro Injection Molding, pages: 241-288 , 2018, Carl Hanser Verlag, Munich

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3139/9781569906545.010

  PDF

Multiscale dimensional tolerance specifications established on shrinkage assessment in ceramic micro injection molding

Quagliotti, Danilo ; Hansen, Hans N. ; Tosello, Guido
in: Procedia CIRP, vol: 75, pages: 143-148
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.060