Macarena Mendez Ribo

Macarena Mendez Ribo

Ph.d.-studerende

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Proces- og Produktionsteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 427, rum 322

2800 Kgs. Lyngby

Tlf.
Fax 45 25 19 61
E-mail mmribo@mek.dtu.dk
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Aktiviteter
Loading

Publikationer rss feed

2020
 

Replication of micro-structured surfaces by integrating AM with PIM

Basso, Alberto ; Mendez Ribo, Macarena ; Christensen, Simon Emil ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
euspen's 20th International Conference & Exhibition

Type: Conference abstract for conference (Peer reviewed)

Status: Accepted/In press     |    År: 2020

2019
  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 71-74, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    År: 2019

 

Characterization techniques for evaluation of micro scale vat photopolymerization-based additive manufacturing

Danielak, Anna Halina ; Mendez Ribo, Macarena ; Üstünyagiz, Esmeray ; Almdal, Kristoffer ; Islam, Aminul ; Pedersen, David Bue
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 44-47, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

  PDF

Impact of post-processing stages on vat-photopolymerized specimens

M. Ribo, M. ; Danielak, A. H. ; Andersen, S. A. ; Üstünyagiz, E. ; Islam, A. ; Pedersen, D. B.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 155, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

  PDF

Influence of the post-curing treatment on the mechanical properties in the vat photopolymerization technique

Üstünyagiz, E. ; Danielak, A. H. ; M. Ribo, M. ; Pedersen, D. B.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 132, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

  PDF

Microstructure Control in 3D Printing with Digital Light Processing

Luongo, A. ; Falster, V. ; Doest, M. B. ; Ribo, M. M. ; Eiriksson, E. R. ; Pedersen, D. B. ; Frisvad, J. R.
in: Computer Graphics Forum

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2019     |    DOI: https://doi.org/10.1111/cgf.13807

  PDF

Optimization of a self-peeling vat for precision vat photopolymerization setups

M. Ribo, Macarena ; Danielak, Anna H. ; Islam, Aminul ; Pedersen, David B.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 234-237, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

2018
 

Characterisation of the Influence of the Colour in Resin for Micro Parts Production by Photopolymerisation Based Additive Manufacturing System

Danielak, Anna H. ; M. Ribo, Macarena ; Pedersen, David B. ; Islam, Aminul
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 64-69, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2018

 

Computer vision for focus calibration of photo-polymerization systems

Ingwersen, Christian K. ; Mortensen, Harald L. ; Ribo, Macarena M. ; Danielak, Anna H. ; Eiríksson, Eyþór R. ; Nielsen, Allan A. ; Pedersen, David B.
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 89-91, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2018