Kim Lau Nielsen

Kim Lau Nielsen

Lektor

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Faststofmekanik

Danmarks Tekniske Universitet

Nils Koppels Allé

Bygning 404, rum 118

2800 Kgs. Lyngby

Tlf.
Mobil
Fax 45 25 19 61
E-mail kin@mek.dtu.dk
ORCID 0000-0002-0502-8008
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Kurser
DTU nyheder
Loading

Publikationer rss feed

2019
 

A finite strain FE-Implementation of the Fleck-Willis gradient theory: Rate-independent versus visco-plastic formulation

Nielsen, K. L. ; Niordson, C. F.
in: European Journal of Mechanics A - Solids, vol: 75, pages: 389-398

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.euromechsol.2019.02.010

 

An investigation of back stress formulations under cyclic loading

El-Naaman, S. A. ; Nielsen, K. L. ; Niordson, C. F.
in: Mechanics of Materials, vol: 130, pages: 76-87

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.mechmat.2019.01.005

 

A steady-state modeling framework incorporating the Kuroda–Tvergaard model: demonstrated on single crystal crack growth

Juul, K. J. ; El-Naaman, S. A. ; Nielsen, K. L. ; Niordson, C. F.
in: Archive of Applied Mechanics, vol: 89, issue: 10, pages: 2133–2145

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1007/s00419-019-01567-4

 

Effect of damage-related microstructural parameters on plate tearing at steady state

Tekog̃lu, C. ; Nielsen, K. L.
in: European Journal of Mechanics, A/Solids, vol: 77

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.euromechsol.2019.103818

 

Finite strain analysis of size effects in wedge indentation into a Face-Centered Cubic (FCC) single crystal

Lynggaard, J. ; Nielsen, K. L. ; Niordson, C. F.
in: European Journal of Mechanics A - Solids, vol: 76, pages: 193-207

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.euromechsol.2019.02.008

 

Grain-size affected mechanical response and deformation behavior in microscale reverse extrusion

Zhang, Bin ; Dodaran, Mohammad ; Ahmed, Shahrior ; Shao, Shuai ; Meng, W. J. ; Juul, K. J. ; Nielsen, K. L.
in: Materialia, vol: 6

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.mtla.2019.100272

 

Investigation of a gradient enriched Gurson-Tvergaard model for porous strain hardening materials

Holte, I. ; Niordson, C. F. ; Nielsen, K. L. ; Tvergaard, V.
in: European Journal of Mechanics A - Solids, vol: 75, pages: 472-484

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.euromechsol.2019.03.001

 

Micro-mechanics based cohesive zone modeling of full scale ductile plate tearing: From initiation to steady-state

Andersen, R.G. ; Felter, C. L. ; Nielsen, K. L.
in: International Journal of Solids and Structures, vol: 160, pages: 265–275

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.ijsolstr.2018.10.027

 

Parameter window for assisted crack tip flipping: Studied by a shear extended Gurson model

Nielsen, K. L. ; Felter, C. L.
in: International Journal of Solids and Structures, vol: 171, pages: 135-145

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.ijsolstr.2019.04.021

 

Void-by-void versus multiple void interaction under mode I-mode II or mode I-mode III loading conditions

Andersen, R. G. ; Nielsen, K. L. ; Legarth, B. N.
in: Engineering Fracture Mechanics, vol: 214, pages: 248-259

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.engfracmech.2019.02.031