David Bue Pedersen

David Bue Pedersen

Seniorforsker

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Proces- og Produktionsteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 427, rum 322

2800 Kgs. Lyngby

Tlf.
Fax 45 93 01 90
E-mail dbpe@mek.dtu.dk
ORCID 0000-0002-7013-7614
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Kurser
DTU nyheder
Loading

Publikationer rss feed

2019
 

A method for identification and quantification of thermal lensing in powder bed fusion

Andersen, S. A. ; Valente, E. H. ; Nadimpalli, V. K. ; Hansen, H. N. ; Pedersen, D. B.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 230-233 , 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
19th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 19)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

  PDF

Dimensional and Form Characterization of a Benchmarking Specimen Subjected to Different Post‐Processing Technologies for Metal Additive Manufacturing

Kain, M. ; Loaldi, D. ; Davoudinejad, A. ; Calaon, M. ; Vedel-Smith, N. K. ; Haahr‐Lillevang, L. ; Pedersen, D. B. ; Tosello, G.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

  PDF

Direct Fabrication of Microstructured Surfaces by Additive Manufacturing

Davoudinejad, A. ; Pedersen, D. B. ; Tosello, G.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 118-119, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

 

Experimental investigation and thermo-mechanical modelling for tool life evaluation of photopolymer additively manufactured mould inserts in different injection moulding conditions

Davoudinejad, Ali ; Bayat, Mohamad ; Pedersen, David Bue ; Zhang, Yang ; Hattel, Jesper Henri ; Tosello, Guido
in: International Journal of Advanced Manufacturing Technology, vol: 102, issue: 1-4, pages: 403–420

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1007/s00170-018-3163-7

  PDF

Fabrication of micro-structured surfaces by additive manufacturing, with simulation of dynamic contact angle

Davoudinejad, Ali ; Cai, Yukui ; Pedersen, David Bue ; Luo, Xichun ; Tosello, Guido
in: Materials & Design, vol: 176

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.matdes.2019.107839

  PDF

Geometrical shape assessment of additively manufactured features by Continuous Liquid Interface Production, vat photopolymerization method

Davoudinejad, A. ; Jessen, A. K. ; Farahani, S. D. ; Franke, N. ; Pedersen, D. B. ; Tosello, G.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 116-117, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

  PDF

Influence of atmosphere on microstructure and nitrogen content in AISI 316L fabricated by laser‐based powder bed fusion

Valente, Emilie Hørdum ; Nadimpalli, Venkata Karthik ; Andersen, Sebastian Aagaard ; Pedersen, David Bue ; Christiansen, Thomas L. ; Somers, Marcel A. J.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 244-247, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

 

Mechanical properties of additively manufactured die with numerical analysis in extrusion process

Davoudinejad, A. ; Bayat, M. ; Larsen, A. ; Pedersen, D. B. ; Hattel, J. H. ; Tosello, G.
in: A I P Conference Proceedings Series
Presented at:
35th International Conference of the Polymer Processing Society (PPS-35)

Type: Conference article (Peer reviewed)

Status: Accepted/In press     |    År: 2019

  PDF

Microstructure Control in 3D Printing with Digital Light Processing

Luongo, A. ; Falster, V. ; Doest, M. B. ; Ribo, M. M. ; Eiriksson, E. R. ; Pedersen, D. B. ; Frisvad, J. R.
in: Computer Graphics Forum

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2019     |    DOI: https://doi.org/10.1111/cgf.13807

 

Motion planning and numerical simulation of material deposition at corners in extrusion additive manufacturing

Comminal, Raphaël ; Serdeczny, Marcin P. ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 29

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.06.005