Aminul Islam

Aminul Islam

Lektor

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Proces- og Produktionsteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 427, rum 306A

2800 Kgs. Lyngby

Tlf.
Fax 45 25 19 61
E-mail mais@mek.dtu.dk
ORCID 0000-0002-8275-6631
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Kurser
Loading

Publikationer rss feed

2019
 

Characterization techniques for evaluation of micro scale vat photopolymerization-based additive manufacturing

Danielak, Anna Halina ; Mendez Ribo, Macarena ; Üstünyagiz, Esmeray ; Almdal, Kristoffer ; Islam, Aminul ; Pedersen, David Bue
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 44-47, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

 

Comprehensive characterization and material modeling for ceramic injection molding simulation performance validations

Tosello, Guido ; Marhöfer, David Maximilian ; Islam, Aminul ; Müller, Tobias ; Plewa, Klaus ; Piotter, Volker
in: International Journal of Advanced Manufacturing Technology, vol: 102, pages: 225-240

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1007/s00170-018-03251-3

 

Development of metal–graphene-filled hybrid composites: Characterization of mechanical, thermal, and electrical properties

Doagou Rad, Saeed ; Islam, Aminul ; Alnasser, Ammar
in: Journal of Composite Materials, vol: 53, issue: 24, pages: 3363–3376

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1177/0021998318812928

  PDF

Impact of post-processing stages on vat-photopolymerized specimens

M. Ribo, M. ; Danielak, A. H. ; Andersen, S. A. ; Üstünyagiz, E. ; Islam, A. ; Pedersen, D. B.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 155, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

 

Injection Moulding Simulation and Validation of Thin Wall Components for Precision Applications

Islam, Aminul ; Li, Xiaoliu ; Wirska, Maja
part of: Advances in Manufacturing II, pages: 96-107, 2019, Springer
Presented at:
Sixth International Scientific-Technical Conference Manufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1007/978-3-030-16943-5_9

 

Investigation of conductive hybrid polymer composites reinforced with copper micro fibers and carbon nanotubes produced by injection molding

Doagou-Rad, Saeed ; Islam, Aminul ; Antusch, Steffen ; Jung, Judith ; Klein, Alexander ; Plewa, Klaus ; Piotter, Volker
in: Materials Today Communications, vol: 20

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.mtcomm.2019.100566

 

Multiscale molecular dynamics-FE modeling of polymeric nanocomposites reinforced with carbon nanotubes and graphene

Doagou-Rad, S. ; Jensen, J. S. ; Islam, A. ; Mishnaevsky Jr., Leon
in: Composite Structures, vol: 217, pages: 27-36

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.compstruct.2019.03.017

  PDF

Optimization of a self-peeling vat for precision vat photopolymerization setups

M. Ribo, Macarena ; Danielak, Anna H. ; Islam, Aminul ; Pedersen, David B.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 234-237, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

 

Process chains for the mass production of transparent crowns for posterior teeth

Islam, Aminul ; Hansen, Hans Nørgaard ; Rabenow, Lisa ; Nielsen, Keld
in: CIRP annals, vol: 68, issue: 1, pages: 591-594

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.cirp.2019.04.015

2018
 

Characterisation of the Influence of the Colour in Resin for Micro Parts Production by Photopolymerisation Based Additive Manufacturing System

Danielak, Anna H. ; M. Ribo, Macarena ; Pedersen, David B. ; Islam, Aminul
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 64-69, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2018