Yang Zhang

Yang Zhang

Seniorforsker

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Proces- og Produktionsteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 427, rum 323B

2800 Kgs. Lyngby

Tlf.
Fax 45 25 48 70
E-mail yazh@mek.dtu.dk
ORCID 0000-0002-0883-8233
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Aktiviteter
Kurser
Loading

Publikationer rss feed

2019
 

Breaking the Limit of Micro-Ductility in Oxide Glasses

Januchta, Kacper ; Stepniewska, Malwina ; Jensen, Lars Rosgaard ; Zhang, Yang ; Somers, Marcel A. J. ; Bauchy, Mathieu ; Yue, Yuanzheng ; Smedskjær, Morten Mattrup
in: Advanced Science

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2019     |    DOI: https://doi.org/10.1002/advs.201901281

 

Experimental investigation and thermo-mechanical modelling for tool life evaluation of photopolymer additively manufactured mould inserts in different injection moulding conditions

Davoudinejad, Ali ; Bayat, Mohamad ; Pedersen, David Bue ; Zhang, Yang ; Hattel, Jesper Henri ; Tosello, Guido
in: International Journal of Advanced Manufacturing Technology, vol: 102, issue: 1-4, pages: 403–420

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1007/s00170-018-3163-7

  PDF

Observation of Crack-Free Vickers Indents at 500 N in Annealed Caesium Aluminoborate Glass

Januchta, K. ; Stepniewska, M. ; Yue, Yuanzheng ; Jensen, L. ; Zhang, Yang ; Munch, Steffen S. ; Somers, Marcel A. J. ; Smedskjær, Morten Mattrup
Presented at:
25th International Congress on Glass

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    År: 2019

  PDF

Optimization of corner micro end milling by finite element modelling for machining thin features

Davoudinejad, Ali ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
in: Procedia CIRP, vol: 82, pages: 362-367
Presented at:
17th CIRP Conference on Modelling of Machining Operations

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.procir.2019.04.158

  PDF

Simulation of thin features machining by micro end-milling using finite element modelling

Davoudinejad, Ali ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 120-121, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

2018
  PDF

A method for the characterization of the reflectance of anisotropic functional surfaces

Regi, Francesco ; Nielsen, J B ; Li, Dongya ; Zhang, Y ; Frisvad, Jeppe Revall ; Aanæs, Henrik ; Tosello, Guido
in: Surface Topography: Metrology and Properties, vol: 6, issue: 3

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.1088/2051-672X/aac373

  PDF

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Zhang, Yang ; Pedersen, David Bue ; Mischkot, Michael ; Calaon, Matteo ; Baruffi, Federico ; Tosello, Guido
in: Journal of Visualized Experiments, vol: 138

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.3791/57335

  PDF

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A. ; Charalambis, A. ; Zhang, Y. ; Calaon, M. ; Pedersen, D. B. ; Tosello, G. ; Hansen, H. N.
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Poster (Peer reviewed)

Status: Published     |    År: 2018

  PDF

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, Ali ; Charalambis, Alessandro ; Tosello, Guido ; Zhang, Yang ; Calaon, Matteo ; Pedersen, David Bue ; Hansen, Hand Nørgaard
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 383-384 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2018

 

A study of laser surface modification of polymers: A comparison in air and water

Marla, Deepak ; Andersen, Sebastian A. ; Zhang, Yang ; Hattel, Jesper H. ; Spangenberg, Jon
in: Journal of Manufacturing Processes, vol: 32, pages: 432-437

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.1016/j.jmapro.2018.03.005