Jesper Thorborg

Jesper Thorborg

Seniorforsker

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Proces- og Produktionsteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 425, rum 232

2800 Kgs. Lyngby

Tlf.
Fax 45 25 19 61
E-mail jest@mek.dtu.dk
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Loading

Publikationer rss feed

2019
  PDF

Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation

Bayat, Mohamad ; Thanki, Aditi ; Mohanty, Sankhya ; Witvrouw, Ann ; Yang, Shoufeng ; Thorborg, Jesper ; Skat Tiedje, Niels ; Hattel, Jesper Henri
in: Additive Manufacturing

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.100835

 

Microstructure and residual elastic strain at graphite nodules in ductile cast iron analyzed by synchrotron X-ray microdiffraction

Zhang, Y. B. ; Andriollo, T. ; Fæster, S. ; Barabash, R. ; Xu, R. ; Tiedje, N. ; Thorborg, J. ; Hattel, J. ; Juul Jensen, D. ; Hansen, N.
in: Acta Materialia, vol: 167, pages: 221-230

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.actamat.2019.01.038

2018
  PDF

Residual Stresses around Individual Graphite Nodules in Ductile Iron: Impact on the Tensile Mechanical Properties

Andriollo, Tito ; Thorborg, Jesper ; Tiedje, Niels Skat ; Hattel, Jesper Henri
in: Materials Science Forum, vol: 925, pages: 465-472

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.4028/www.scientific.net/MSF.925.465

 

Uncovering the local inelastic interactions during manufacture of ductile cast iron: How the substructure of the graphite particles can induce residual stress concentrations in the matrix

Andriollo, Tito ; Hellström, Kristina ; Sonne, Mads Rostgaard ; Thorborg, Jesper ; Tiedje, Niels Skat ; Hattel, Jesper Henri
in: Journal of the Mechanics and Physics of Solids, vol: 111, pages: 333–357

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.1016/j.jmps.2017.11.005

2017
  PDF

Analysis of the equivalent indenter concept used to extract Young’s modulus from a nano-indentation test: some new insights into the Oliver–Pharr method

Andriollo, Tito ; Thorborg, Jesper ; Hattel, Jesper Henri
in: Modelling and Simulation in Materials Science and Engineering, vol: 25, issue: 4

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: https://doi.org/10.1088/1361-651X/aa6831

  PDF

Cavity prediction in sand mould production applying the DISAMATIC process

Hovad, Emil ; Larsen, Per ; Spangenberg, Jon ; Walther, Jens Honore ; Thorborg, Jesper ; Hattel, Jesper Henri
in: Powder Technology, vol: 321, pages: 204-217

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: https://doi.org/10.1016/j.powtec.2017.08.037

 

Integrated Computational Modelling of Thermochemical Surface Engineering of Stainless Steel

Kücükyildiz, Ömer Can ; Sonne, Mads Rostgaard ; Thorborg, Jesper ; Hattel, Jesper Henri ; Somers, Marcel A. J.
part of: Proceedings of the 24th IFHTSE Congress , 2017
Presented at:
24th International Federation for Heat Treatment and Surface Engineering Congress (IFHTSE Congress 2017)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2017

 

Internal Casting Stresses and Dimensional Stability

Andriollo, Tito ; Vedel-Smith, Nikolaj Kjelgaard ; Thorborg, Jesper ; Hattel, Jesper Henri
part of: ASM Handbook, pages: 600-605, 2017, ASM International

Type: Book chapter (Peer reviewed)

Status: Published     |    År: 2017

  PDF

Numerical simulation of flow and compression of green sand

Hovad, Emil ; Thorborg, Jesper

Type: Ph.D. thesis

Status: Published     |    År: 2017