Leonardo De Chiffre

Leonardo De Chiffre

Professor

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Proces- og Produktionsteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 425, rum 206

2800 Kgs. Lyngby

Tlf.
Fax 45 25 19 61
E-mail ldch@mek.dtu.dk
ORCID 0000-0002-6141-9580
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Kurser
DTU nyheder
Loading

Publikationer rss feed

2019
 

Development and metrological validation of a new automated scanner system for freeform measurements on wind turbine blades in the production

Lyngby, Rasmus Ahrenkiel ; Nielsen, Ewa ; De Chiffre, Leonardo ; Aanæs, Henrik ; Dahl, Anders Bjorholm
in: Precision Engineering, vol: 56, pages: 255-266

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.precisioneng.2018.12.006

  PDF

Roughness Investigation of SLM Manufactured Conformal Cooling Channels Using X-ray Computed Tomography

Klingaa, Christopher G. ; Bjerre, Mathias K. ; Baier, Sina ; De Chiffre, Leonardo ; Mohanty, Sankhya ; Hattel, Jesper H.
part of: Proceedings of the 9th Conference on Industrial Computed Tomography, Padova, Italy (iCT 2019), 2019
Presented at:
9th Conference on Industrial Computed Tomography (ICT2019)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2019

  PDF

Thermal characterization of a micro polishing machine and effect on path strategy compensation

Ben Achour, Soufian ; Checchi, Alessandro ; Bissacco, Giuliano ; De Chiffre, Leonardo
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 446-447, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

2018
  PDF

Accurate measurements in a production environment using dynamic length metrology (DLM)

Chiffre, L. De ; González-Madruga, D. ; Costa, G. Dalla ; Sonne, M.R. ; Mohammadi, A. ; Hattel, J.H. ; Hansen, H.N. ; Mohaghegh, K. ; Meftahpour, M. ; Meinertz, J. ; Meinertz, C.
in: Procedia CIRP, vol: 75, pages: 343-348
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.074

  PDF

Applicability of Acoustic Emission monitoring to micro polishing

Ben Achour, Soufian ; Bissacco, Giuliano ; De Chiffre, L.
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 385-386, 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2018

 

A simple model linking surface roughness with friction coefficient and manufacturing cost

De Chiffre, L. ; Kücükyildiz, Ô. C. ; Bay, N.
in: Key Engineering Materials, vol: 767 , pages: 275-282

Type: Conference article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.4028/www.scientific.net/KEM.767.275

  PDF

Automated contact area measurement on structured surfaces

Kücükyildiz, Ömer C. ; Jensen, Sebastian H. N. ; De Chiffre, Leonardo
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 473-474 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2018

  PDF

Characterization of holding brake friction pad surface after pin-on-plate wear test

Drago, N. ; Gonzalez Madruga, D. ; De Chiffre, L.
in: Surface Topography: Metrology and Properties, vol: 6, issue: 1

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.1088/2051-672X/aaabd3

  PDF

Compensation of in-line metrology of polymer parts based on 3D thermomechanical analyses

Sonne, M.R. ; Costa, G. Dalla ; Madruga, D.G. ; Chiffre, L. De ; Hattel, J.H.
in: Procedia CIRP, vol: 75, pages: 349-354
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.083

  PDF

Considerations on numerical modelling for compensation of in-process metrology in manufacturing

Sonne, M. R. ; Mohammadi, A. ; Dalla Costa, G. ; Madruga, D. G. ; De Chiffre, L. ; Hattel, J. H.
part of: Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology , pages: 453-454 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2018