Sebastian Aagaard Andersen

Sebastian Aagaard Andersen

Ph.d.-studerende

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Proces- og Produktionsteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 427, rum 314

2800 Kgs. Lyngby

Tlf.
Mobil
Fax 45 25 19 61
E-mail seaa@mek.dtu.dk
ORCID 0000-0002-7115-0538
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
DTU nyheder
Loading

Publikationer rss feed

2019
  PDF

Influence of atmosphere on microstructure and nitrogen content in AISI 316L fabricated by laser‐based powder bed fusion

Valente, Emilie Hørdum ; Nadimpalli, Venkata Karthik ; Andersen, Sebastian Aagaard ; Pedersen, David Bue ; Christiansen, Thomas L. ; Somers, Marcel A. J.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 244-247, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

2018
 

A 5D DoF Parallel Kinematic Controler For Big Area Additive Manufacturing

Jensen, Mathias L. ; K. Kiewning, Malte ; Spangenberg, Jon ; Andersen, Sebastian B. ; Pedersen, David B. ; Hansen, Hans N.
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 167-171, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2018

 

A Beam Modulator and Galvanometer Controller for Metal Powder Bed Fusion

Andersen, Sebastian Aa. ; Del Rio, Sonia ; Pedersen, David Bue ; Hansen, Hans N.
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 172-177, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2018

 

A study of laser surface modification of polymers: A comparison in air and water

Marla, Deepak ; Andersen, Sebastian A. ; Zhang, Yang ; Hattel, Jesper H. ; Spangenberg, Jon
in: Journal of Manufacturing Processes, vol: 32, pages: 432-437

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.1016/j.jmapro.2018.03.005

2017
 

A perfomance assesment of a 2 axis scanning mirror galvanometer for powder bed fusion

Pedersen, David Bue ; Andersen, Sebastian Aagaard ; Nielsen, Jakob Skov ; Eiríksson, Eyþór Rúnar ; Nielsen, Jannik Boll ; Wilm, Jakob ; Aanæs, Henrik ; Hansen, Hans Nørgaard
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE, 2017, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen and ASPE Special Interest Group Meeting: Additive Manufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2017

  PDF

Considerations on the Construction of a Powder Bed Fusion Platform for Additive Manufacturing

Andersen, Sebastian Aagaard ; Nielsen, Karl-Emil ; Pedersen, David Bue ; Nielsen, Jakob Skov
in: Physics Procedia, vol: 89, pages: 3-10
Presented at:
Nordic Laser Materials Processing Conference (NOLAMP16)

Type: Conference article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: https://doi.org/10.1016/j.phpro.2017.08.004