Niels Skat Tiedje

Niels Skat Tiedje

Associate Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 306B

2800 Kgs. Lyngby

Ph.
Fax +45 45 93 45 70
E-mail nsti@mek.dtu.dk
ORCID 0000-0001-5198-3551
Home page
Personal website

Request a vCard via e-mail.

Publications
Projects
Activities
Courses
CV
DTU news
Loading

Publications rss feed

2017
 

A Contribution to the Understanding of the Combined Effect of Nitrogen and Boron in Grey Cast Iron

Strande, Knud ; Tiedje, Niels Skat ; Chen, Ming
in journal: International Journal of Metalcasting (ISSN: 1939-5981) (DOI: http://dx.doi.org/10.1007/s40962-016-0079-6), vol: 11, issue: 1, pages: 61-70, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/s40962-016-0079-6

 

Kinetics modeling of delta-ferrite formation and retainment during casting of supermartensitic stainless steel

Nießen, Frank ; Tiedje, Niels Skat ; Hald, John
in journal: Materials & Design (ISSN: 0264-1275) (DOI: http://dx.doi.org/10.1016/j.matdes.2017.01.026), vol: 118, pages: 138-145, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.matdes.2017.01.026

  PDF
2016
 

Traceability of optical length measurements on sand surfaces

Mohaghegh, Kamran ; Yazdanbakhsh, Seyed Alireza ; Tiedje, Niels Skat ; De Chiffre, Leonardo
part of: Proceedings of euspen’s 16th International Conference & Exhibition, 2016,
Presented at:
euspen’s 16th International Conference & Exhibition, 2016, Nottingham

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

 

Step-height measurements on sand surfaces: A comparison between optical scanner and coordinate measuring machine

Mohaghegh, Kamran ; Yazdanbakhsh, Seyed Alireza ; Tiedje, Niels Skat ; De Chiffre, Leonardo
part of: Proceedings of euspen’s 16th International Conference & Exhibition,, 2016,
Presented at:
euspen’s 16th International Conference & Exhibition, 2016, Nottingham

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

 

Bonding mechanisms in spot welded three layer combinations

Moghadam, Marcel ; Tiedje, Niels Skat ; Seyyedian Choobi, Mahsa ; Nielsen, Chris Valentin ; Pantleon, Karen ; Bay, Niels Oluf
part of: Proceedings of 9th International Seminar & Conference on Advances in Resistance Welding , 2016,
Presented at:
9th International Seminar & Conference on Advances in Resistance Welding , 2016, Miami, FL

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

  PDF

A micro-mechanical analysis of thermo-elastic properties and local residual stresses in ductile iron based on a new anisotropic model for the graphite nodules

Andriollo, Tito ; Thorborg, Jesper ; Tiedje, Niels Skat ; Hattel, Jesper Henri
in journal: Modelling and Simulation in Materials Science and Engineering (ISSN: 0965-0393) (DOI: http://dx.doi.org/10.1088/0965-0393/24/5/055012), vol: 24, issue: 5, 2016

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2016     |    DOI: http://dx.doi.org/10.1088/0965-0393/24/5/055012

 

Moisture diffusion coefficients determination of furan bonded sands and water based foundry coatings

Di Muoio, Giovanni Luca ; Tiedje, Niels Skat
in journal: The International Journal of Cast Metals Research (ISSN: 1364-0461) (DOI: http://dx.doi.org/10.1179/1743133615Y.0000000038), vol: 29, issue: 3, pages: 121-128, 2016

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2016     |    DOI: http://dx.doi.org/10.1179/1743133615Y.0000000038

2015
 

Thermal distortion of disc-shaped ductile iron castings in vertically parted moulds

Vedel-Smith, Nikolaj Kjelgaard ; Rasmussen, Jakob ; Tiedje, Niels Skat
in journal: Journal of Materials Processing Technology (ISSN: 0924-0136) (DOI: http://dx.doi.org/10.1016/j.jmatprotec.2014.11.025), vol: 217, pages: 262-271, 2015

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: http://dx.doi.org/10.1016/j.jmatprotec.2014.11.025

  PDF

Modeling of damage in ductile cast iron – The effect of including plasticity in the graphite noduless

Andriollo, Tito ; Thorborg, Jesper ; Tiedje, Niels Skat ; Hattel, Jesper Henri
in journal: I O P Conference Series: Materials Science and Engineering (ISSN: 1757-8981) (DOI: http://dx.doi.org/10.1088/1757-899X/84/1/012027), vol: 84, 2015
Presented at:
14th International Conference on Modelling of Casting, Welding and Advanced Solidification Processes, 2015, Awaji island, Hyogo

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: http://dx.doi.org/10.1088/1757-899X/84/1/012027