David Bue Pedersen

David Bue Pedersen

Senior Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 322

2800 Kgs. Lyngby

Ph.
Fax +4545 93 01 90
E-mail dbpe@mek.dtu.dk
ORCID 0000-0002-7013-7614
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2019
 

Experimental investigation and thermo-mechanical modelling for tool life evaluation of photopolymer additively manufactured mould inserts in different injection moulding conditions

Davoudinejad, Ali ; Bayat, Mohamad ; Pedersen, David Bue ; Zhang, Yang ; Hattel, Jesper Henri ; Tosello, Guido
in: International Journal of Advanced Manufacturing Technology, vol: 102, issue: 1-4, pages: 403–420

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s00170-018-3163-7

  PDF

Fabrication of micro-structured surfaces by additive manufacturing, with simulation of dynamic contact angle

Davoudinejad, Ali ; Cai, Yukui ; Pedersen, David Bue ; Luo, Xichun ; Tosello, Guido
in: Materials & Design, vol: 176

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.matdes.2019.107839

 

Mechanical properties of additively manufactured die with numerical analysis in extrusion process

Davoudinejad, A. ; Bayat, M. ; Larsen, A. ; Pedersen, D. B. ; Hattel, J. H. ; Tosello, G.
in: A I P Conference Proceedings Series
Presented at:
35th International Conference of the Polymer Processing Society (PPS-35)

Type: Conference article (Peer reviewed)

Status: Accepted/In press     |    Year: 2019

  PDF

Microstructure Control in 3D Printing with Digital Light Processing

Luongo, A. ; Falster, V. ; Doest, M. B. ; Ribo, M. M. ; Eiriksson, E. R. ; Pedersen, D. B. ; Frisvad, J. R.
in: Computer Graphics Forum

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2019     |    DOI: https://doi.org/10.1111/cgf.13807

 

Motion planning and numerical simulation of material deposition at corners in extrusion additive manufacturing

Comminal, Raphaël ; Serdeczny, Marcin P. ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 29

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.06.005

 

Numerical simulations of the mesostructure formation in material extrusion additive manufacturing

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 28, pages: 419-429

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.05.024

 

Value chain and production cost optimization by integrating additive manufacturing in injection molding process chain

Tosello, Guido ; Charalambis, Alessandro ; Kerbache, Laoucine ; Mischkot, Michael ; Pedersen, David Bue ; Calaon, Matteo ; Hansen, Hans Nørgaard
in: International Journal of Advanced Manufacturing Technology, vol: 100, issue: 1-4, pages: 783–795

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s00170-018-2762-7

2018
  PDF

Additive manufacturing with vat polymerization method for precision polymer micro components production

Davoudinejad, Ali ; Péreza, Lucia C. Díaz ; Quagliotti, Danilo ; Pedersen, David Bue ; Garcíaa, José A. Albajez ; Yagüe-Fabra, José A. ; Tosello, Guido
in: Procedia CIRP, vol: 75, pages: 98-102
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.049

  PDF

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Zhang, Yang ; Pedersen, David Bue ; Mischkot, Michael ; Calaon, Matteo ; Baruffi, Federico ; Tosello, Guido
in: Journal of Visualized Experiments, vol: 138

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3791/57335

  PDF

Direct fabrication of bio-inspired gecko-like geometries with vat polymerization additive manufacturing method

Davoudinejad, A. ; M. Ribo, M. ; Pedersen, D. B. ; Islam, A. ; Tosello, G.
in: Journal of Micromechanics and Microengineering, vol: 28

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1088/1361-6439/aabf17