David Bue Pedersen

David Bue Pedersen

Senior Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 322

2800 Kgs. Lyngby

Ph.
Fax +45 45 93 01 90
E-mail dbpe@mek.dtu.dk
ORCID 0000-0002-7013-7614
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2020
 

Replication of micro-structured surfaces by integrating AM with PIM

Basso, Alberto ; Mendez Ribo, Macarena ; Christensen, Simon Emil ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
euspen's 20th International Conference & Exhibition

Type: Conference abstract for conference (Peer reviewed)

Status: Accepted/In press     |    Year: 2020

2019
  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 71-74, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Additive manufacturing of metal components – process-material interaction in different process chains

Hansen, H. N. ; Hattel, J. H. ; Pedersen, D. B. ; Mohanty, S. ; Andersen, S. A. ; Nadimpalli, V. K. ; Klingaa, C. G. ; Dahmen, T. ; Zhang, Y.
in: I O P Conference Series: Materials Science and Engineering, vol: 580, issue: 1
Presented at:
40th Risø International Symposium on Material Science: Metal Microstructures in 2D, 3D, and 4D

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1088/1757-899x/580/1/012006

  PDF

A method for identification and quantification of thermal lensing in powder bed fusion

Andersen, S. A. ; Valente, E. H. ; Nadimpalli, V. K. ; Hansen, H. N. ; Pedersen, D. B.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 230-233 , 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
19th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 19)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Characterization techniques for evaluation of micro scale vat photopolymerization-based additive manufacturing

Danielak, Anna Halina ; Mendez Ribo, Macarena ; Üstünyagiz, Esmeray ; Almdal, Kristoffer ; Islam, Aminul ; Pedersen, David Bue
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 44-47, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Considerations for interpreting in-situ photodiode sensor data in pulsed mode laser powder bed fusion

Karthik Nadipalli, Venkata ; Andersen, Sebastian A. ; Nielsen, Jakob S. ; Pedersen, David B.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 66-69, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Dimensional and Form Characterization of a Benchmarking Specimen Subjected to Different Post‐Processing Technologies for Metal Additive Manufacturing

Kain, M. ; Loaldi, D. ; Davoudinejad, A. ; Calaon, M. ; Vedel-Smith, N. K. ; Haahr‐Lillevang, L. ; Pedersen, D. B. ; Tosello, G.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 104-5, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Direct Fabrication of Microstructured Surfaces by Additive Manufacturing

Davoudinejad, A. ; Pedersen, D. B. ; Tosello, G.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 118-119, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Experimental analysis of the filament feeding force in material extrusion additive manufacturing

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 141-145, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019