Mads Rostgaard Sonne

Mads Rostgaard Sonne

Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 217

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 19 61
E-mail mrso@mek.dtu.dk
ORCID 0000-0001-6320-0841
Home page

Request a vCard via e-mail.

Profile
Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2020
 

Thermo-chemical-mechanical simulation of low temperature nitriding of austenitic stainless steel; inverse modelling of surface reaction rates

Kücükyildiz, Ömer C. ; Sonne, Mads R. ; Thorborg, Jesper ; Somers, Marcel A. J. ; Hattel, Jesper H.
in: Surface and Coatings Technology, vol: 381

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.surfcoat.2019.125145

2019
2018
  PDF

Accurate measurements in a production environment using dynamic length metrology (DLM)

Chiffre, L. De ; González-Madruga, D. ; Costa, G. Dalla ; Sonne, M.R. ; Mohammadi, A. ; Hattel, J.H. ; Hansen, H.N. ; Mohaghegh, K. ; Meftahpour, M. ; Meinertz, J. ; Meinertz, C.
in: Procedia CIRP, vol: 75, pages: 343-348
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.074

  PDF

Compensation of in-line metrology of polymer parts based on 3D thermomechanical analyses

Sonne, M.R. ; Costa, G. Dalla ; Madruga, D.G. ; Chiffre, L. De ; Hattel, J.H.
in: Procedia CIRP, vol: 75, pages: 349-354
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.083

  PDF

Multiphysics modelling of manufacturing processes: A review

Jabbari, Masoud ; Baran, Ismet ; Mohanty, Sankhya ; Comminal, Raphaël ; Sonne, Mads Rostgaard ; Nielsen, Michael Wenani ; Spangenberg, Jon ; Hattel, Jesper Henri
in: Advances in Mechanical Engineering, vol: 10, issue: 5, pages: 1-31

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1177/1687814018766188

 

Predicting the reference length of polymer parts with micrometer uncertainty measured under non-reference conditions

Mohammadi, A. ; Sonne, M. R. ; Dalla Costa, G. ; González-Madruga, D. ; De Chiffre, L. ; Hattel, J. H.
in: Precision Engineering, vol: 54, pages: 344-352

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.precisioneng.2018.07.003

 

Thermomechanical Modelling of Direct-Drive Friction Welding Applying a Thermal Pseudo Mechanical Model for the Generation of Heat

Sonne, Mads Rostgaard ; Hattel, Jesper Henri
in: Key Engineering Materials, vol: 767, pages: 343-350

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.4028/www.scientific.net/KEM.767.343

  PDF

Uncovering the local inelastic interactions during manufacture of ductile cast iron: How the substructure of the graphite particles can induce residual stress concentrations in the matrix

Andriollo, Tito ; Hellström, Kristina ; Sonne, Mads Rostgaard ; Thorborg, Jesper ; Tiedje, Niels Skat ; Hattel, Jesper Henri
in: Journal of the Mechanics and Physics of Solids, vol: 111, pages: 333–357

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.jmps.2017.11.005

2017
  PDF

A FEM based methodology to simulate multiple crack propagation in friction stir welds

Lepore, Marcello ; Carlone, Pierpaolo ; Berto, Filippo ; Sonne, Mads Rostgaard
in: Engineering Fracture Mechanics, pages: 154-167

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1016/j.engfracmech.2017.08.024