Leonardo De Chiffre

Leonardo De Chiffre

Professor Emeritus

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 206

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 19 61
E-mail ldch@mek.dtu.dk
ORCID 0000-0002-6141-9580
Home page

Request a vCard via e-mail.

Publications
Projects
Loading

Publications rss feed

2020
 

Deterministic polishing of micro geometries

Ben Achour, Soufian ; Bissacco, Giuliano ; Beaucamp, Anthony ; De Chiffre, Leonardo
in: CIRP annals

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.cirp.2020.04.094

 

Dimensional artefacts to achieve metrological traceability in advanced manufacturing

Carmignato, S. ; De Chiffre, L. ; Bosse, H. ; Leach, R. K. ; Balsamo, A. ; Estler, W. T.
in: CIRP annals

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.cirp.2020.05.009

 

Effect of polymer relaxation in automated micro polishing

Ben Achour, Soufian ; Zhu, Wule ; Bissacco, Giuliano ; Beaucamp, Anthony ; De Chiffre, Leonardo
in: AIP Conference Proceedings, vol: 2205, issue: 1

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1063/1.5142975

 

Measurement of polymers with 3D optical scanners: evaluation of the subsurface scattering effect through five miniature step gauges

Guerra, M G ; Gregersen, Søren K. S. ; Frisvad, Jeppe Revall ; De Chiffre, Leonardo ; Lavecchia, F ; Galantucci, L M
in: Measurement Science and Technology, vol: 31, issue: 1

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1088/1361-6501/ab3edb

  PDF

Use of Miniature Step Gauges to Assess the Performance of 3D Optical Scanners and to Evaluate the Accuracy of a Novel Additive Manufacture Process

Guerra, Maria Grazia ; De Chiffre, Leonardo ; Lavecchia, Fulvio ; Galantucci, Luigi Maria
in: Sensors, vol: 20, issue: 3

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.3390/s20030738

2019
 

Development and metrological validation of a new automated scanner system for freeform measurements on wind turbine blades in the production

Lyngby, Rasmus Ahrenkiel ; Nielsen, Ewa ; De Chiffre, Leonardo ; Aanæs, Henrik ; Dahl, Anders Bjorholm
in: Precision Engineering, vol: 56, pages: 255-266

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.precisioneng.2018.12.006

2018
  PDF

Accurate measurements in a production environment using dynamic length metrology (DLM)

Chiffre, L. De ; González-Madruga, D. ; Costa, G. Dalla ; Sonne, M.R. ; Mohammadi, A. ; Hattel, J.H. ; Hansen, H.N. ; Mohaghegh, K. ; Meftahpour, M. ; Meinertz, J. ; Meinertz, C.
in: Procedia CIRP, vol: 75, pages: 343-348
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.074

 

A simple model linking surface roughness with friction coefficient and manufacturing cost

De Chiffre, L. ; Kücükyildiz, Ô. C. ; Bay, N.
in: Key Engineering Materials, vol: 767 , pages: 275-282

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.4028/www.scientific.net/KEM.767.275

  PDF

Characterization of holding brake friction pad surface after pin-on-plate wear test

Drago, N. ; Gonzalez Madruga, D. ; De Chiffre, L.
in: Surface Topography: Metrology and Properties, vol: 6, issue: 1

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1088/2051-672X/aaabd3

  PDF

Compensation of in-line metrology of polymer parts based on 3D thermomechanical analyses

Sonne, M.R. ; Costa, G. Dalla ; Madruga, D.G. ; Chiffre, L. De ; Hattel, J.H.
in: Procedia CIRP, vol: 75, pages: 349-354
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.procir.2018.04.083