Dario Loaldi

Dario Loaldi

PhD student

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 322

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 19 61
E-mail darloa@mek.dtu.dk
ORCID 0000-0003-0371-7325
Home page

Request a vCard via e-mail.

Publications
Projects
Activities
Loading

Publications rss feed

2020
 

Influences of micro-ridges orientation and position on the replication of micro-structured surfaces by injection molding

Regi, Francesco ; Basso, Alberto ; Kain, Martin ; Loaldi, Dario ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
in: AIP Conference Proceedings, vol: 2205, issue: 1
Presented at:
35th International Conference of the Polymer Processing Society (PPS-35)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1063/1.5142928

2019
  PDF

Comparison of Selective Laser Melting Post-Processes based on Amplitude and Functional Surface Roughness parameters

Loaldi, D. ; Kain, M. ; Haahr‐Lillevang, L. ; Vedel-Smith, N. K. ; Tosello, G.
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Comparison of Selective Laser Melting Post-Processes based on Amplitude and Functional Surface Roughness parameters

Loaldi, Dario ; Kain, Martin ; Haahr‐Lillevang, Lasse ; Vedel-Smith, Nikolaj Kjelgaard ; Tosello, Guido
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Dimensional and Form Characterization of a Benchmarking Specimen Subjected to Different Post‐Processing Technologies for Metal Additive Manufacturing

Kain, M. ; Loaldi, D. ; Davoudinejad, A. ; Calaon, M. ; Vedel-Smith, N. K. ; Haahr‐Lillevang, L. ; Pedersen, D. B. ; Tosello, G.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 104-5, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Functionality characterization of injection moulded micro-structured surfaces

Regi, Francesco ; Doest, Mads ; Loaldi, Dario ; Li, Dongya ; Frisvad, Jeppe Revall ; Tosello, Guido ; Zhang, Yang
in: Precision Engineering, vol: 60, pages: 594-601

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.precisioneng.2019.07.014

 

Injection Moulding optimization of nanostructured components using surface fingerprint

Loaldi, D. ; Zhang, Y. ; Calaon, M. ; Quagliotti, D. ; Tosello, G.
Presented at:
Polymer Replication on Nanoscale 2019

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

 

Modelling the filling behavior of micro structured plastic optical components

Loaldi, Dario ; Quagliotti, Danilo ; Calaon, Matteo ; Tosello, Guido
part of: Proceedings of WCMNM 2018, 2019
Presented at:
2019 World Congress on Micro and Nano Manufacturing (WCMNM2019)

Type: Article in proceedings (Peer reviewed)

Status: Accepted/In press     |    Year: 2019

 

Tapping AFM measurements artefacts in the acquisition of high-aspect-ratio rectangular nanostructures using dedicated sharp tips

Loaldi, Dario ; Quagliotti, Danilo ; Calaon, Matteo ; Czolkos, Ilja ; Johansson, Alicia ; Nielsen, Theodor ; Garnaes, Jørgen ; Tosello, Guido
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 336-337, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
19th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 19)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Tapping AFM measurements artefacts in the acquisition of high-aspect-ratio rectangular nanostructures using dedicated sharp tips

Loaldi, Dario ; Quagliotti, Danilo ; Calaon, Matteo ; Czolkos, Ilja ; Johansson, Alicia ; Nielsen, Theodor ; Garnaes, Jørgen ; Tosello, Guido
Presented at:
19th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 19)

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2019

2018
  PDF

Effect of process parameters on flow length and flash formation in injection moulding of high aspect ratio polymeric micro features

Eladl, Abdelkhalik ; Mostafa, Rania ; Islam, Aminul ; Loaldi, Dario ; Soltan, Hassan ; Hansen, Hans N. ; Tosello, Guido
in: Micromachines, vol: 9, issue: 2

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3390/mi9020058