Dorte Juul Jensen

Dorte Juul Jensen

Professor, dr. techn.

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 212

2800 Kgs. Lyngby

Ph.
Ph.
Mobile
Fax +45 45 25 19 61
E-mail doje@mek.dtu.dk
ORCID 0000-0001-5096-6602
Home page

Request a vCard via e-mail.

Publications
Projects
DTU news
Loading

Publications rss feed

2018
 

Importance of Non-uniform Boundary Migration for Recrystallization Kinetics

Lin, Fengxiang ; Zhang, Yubin ; Pantleon, Wolfgang ; Juul Jensen, Dorte
in: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, vol: 49, issue: 11, pages: 5246-5258

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1007/s11661-018-4846-2

  PDF

In-situ investigation of the evolution of annealing twins in high purity aluminium

He, Qiongyao ; Huang, Tianlin ; Shuai, Linfei ; Zhang, Yubin ; Wu, Guilin ; Huang, Xiaoxu ; Juul Jensen, Dorte
in: Scripta Materialia, vol: 153, pages: 68-72

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.scriptamat.2018.04.034

2017
  PDF

4D Study of Grain Growth in Armco Iron Using Laboratory X-ray Diffraction Contrast Tomography

Sun, Jun ; Lyckegaard, Allan ; Zhang, Yubin ; Catherine, S. A. ; Patterson, B. R. ; Bachmann, Florian ; Gueninchault, N. ; Bale, H. ; Holzner, C. ; Lauridsen, E. ; Juul Jensen, Dorte
in: I O P Conference Series: Materials Science and Engineering, vol: 219
Presented at:
38th Risø International Symposium on Materials Science

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1088/1757-899X/219/1/012039

 

A method to characterize the roughness of 2-D line features: recrystallization boundaries

Sun, Jun ; Zhang, Yubin ; Dahl, Anders Bjorholm ; Conradsen, Knut ; Juul Jensen, Dorte
in: Journal of Microscopy, vol: 265, issue: 3, pages: 313–321

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1111/jmi.12501

  PDF

Analysis of bearing steel exposed to rolling contact fatigue

Hansen, K. T. ; Fæster, Søren ; Natarajan, Anand ; Mishin, Oleg ; Danielsen, Hilmar Kjartansson ; Juul Jensen, Dorte ; Klit, Peder
in: I O P Conference Series: Materials Science and Engineering, vol: 219
Presented at:
38th Risø International Symposium on Materials Science

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1088/1757-899X/219/1/012024

  PDF

Boundary migration in a 3D deformed microstructure inside an opaque sample

Zhang, Yubin ; Budai, J D ; Tischler, Jonathan Z. ; Liu, W. ; Xu, Ruichao ; Homer, E. R. ; Godfrey, A ; Juul Jensen, Dorte
in: Scientific Reports, vol: 7, issue: 1

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1038/s41598-017-04087-9

  PDF

Direct observation of nucleation in the bulk of an opaque sample

Xu, Chaoling ; Zhang, Yubin ; Godfrey, Andrew William ; Wu, Guilin ; Liu, Wenjun ; Tischler, Jonathan Z. ; Liu, Qing ; Juul Jensen, Dorte
in: Scientific Reports, vol: 7

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1038/srep42508

 

Fabricating interstitial-free steel with simultaneous high strength and good ductility with homogeneous layer and lamella structure

Zhang, Ling ; Chen, Zhen-Zhe ; Wang, Yuhui ; Ma, Guoqiang ; Huang, Tianlin ; Wu, Guilin ; Juul Jensen, Dorte
in: Scripta Materialia, vol: 141, pages: 111-114

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1016/j.scriptamat.2017.06.044

  PDF

Quantification of deformation microstructure at ultra-low tensile strain in pure Al prepared by spark plasma sintering

Zhang, C. L. ; Zhang, Y. B. ; Wul, G. L. ; Liu, W. ; Juul Jensen, Dorte ; Godfrey, A.
in: I O P Conference Series: Materials Science and Engineering, vol: 219
Presented at:
38th Risø International Symposium on Materials Science

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1088/1757-899X/219/1/012050