Kamran Mohaghegh

Kamran Mohaghegh

Visiting Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 221

2800 Kgs. Lyngby

Request a vCard via e-mail.

Publications
Projects
Loading

Publications rss feed

2016
 

Step-height measurements on sand surfaces: A comparison between optical scanner and coordinate measuring machine

Mohaghegh, Kamran ; Yazdanbakhsh, Seyed Alireza ; Tiedje, Niels Skat ; De Chiffre, Leonardo
part of: Proceedings of euspen’s 16th International Conference & Exhibition,, 2016
Presented at:
euspen’s 16th International Conference & Exhibition

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

 

Traceability of Height Measurements on Green Sand Molds using Optical 3D Scanning

Mohaghegh, Kamran ; Yazdanbakhsh, S.A. ; Tiedje, N. S. ; De Chiffre, Leonardo
part of: Proceedings of the CastExpo & 120th Metalcasting Congress, 2016, American Foundry Society
Presented at:
CastExpo & 120th Metalcasting Congress

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

 

Traceability of optical length measurements on sand surfaces

Mohaghegh, Kamran ; Yazdanbakhsh, Seyed Alireza ; Tiedje, Niels Skat ; De Chiffre, Leonardo
part of: Proceedings of euspen’s 16th International Conference & Exhibition, 2016
Presented at:
euspen’s 16th International Conference & Exhibition

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

2014
  PDF

A study on the surface roughness of a thin HSQ coating on a fine milled surface

Mohaghegh, Kamran ; Hansen, Hans Nørgaard ; Pranov, Henrik ; Kofod, Guggi
part of: Proceedings of the 14th euspen International Conference, 2014, euspen
Presented at:
14th International Conference of the European Society for Precision Engineering and Nanotechnology

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2014

  PDF

Characterisation of surfaces produced by robot-assisted polishing (RAP)

Mohaghegh, Kamran ; De Chiffre, Leonardo
part of: Proceedings of the 14th euspen International Conference, 2014, euspen
Presented at:
14th International Conference of the European Society for Precision Engineering and Nanotechnology

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2014

2013
  PDF

A New Rig for Testing Textured Surfaces in Pure Sliding Conditions

Godi, Alessandro ; Grønbæk, J. ; Mohaghegh, Kamran ; Klit, Peder ; De Chiffre, Leonardo
in: Tribology Letters, vol: 50, issue: 3, pages: 397-405

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: https://doi.org/10.1007/s11249-013-0137-7

  PDF

Testing of newly developed functional surfaces under pure sliding conditions

Godi, Alessandro ; Mohaghegh, Kamran ; Grønbæk, J. ; Klit, Peder ; De Chiffre, Leonardo
in: Tribology Letters, vol: 51, issue: 1, pages: 171-180

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: https://doi.org/10.1007/s11249-013-0162-6

  PDF

Verification of thickness and surface roughness of a thin film transparent coating

Mohaghegh, Kamran ; Hansen, Hans Nørgaard ; Pranov, H. ; Kofod, G.
part of: Proceedings of the 13th euspen International Conference, 2013
Presented at:
13th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

2012
  PDF

An Axial Sliding Test for machine elements surfaces

Godi, Alessandro ; Grønbæk, J. ; Mohaghegh, Kamran ; Klit, Peder ; De Chiffre, Leonardo
part of: Proceedings of the 15th Nordic Symposium on Tribology , 2012
Presented at:
15th Nordic Symposium on Tribology

Type: Conference abstract in proceedings

Status: Published     |    Year: 2012

2010
 

Improvement of reverse-engineered turbine blades using construction geometry

Mohaghegh, Kamran ; Sadeghi, Mohammad H. ; Abdullah, Amir ; Boutorabi, Reza
in: International Journal of Advanced Manufacturing Technology, vol: 49, issue: 5-8, pages: 675-687

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2010     |    DOI: https://doi.org/10.1007/s00170-009-2409-9