Aminul Islam

Aminul Islam

Associate Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 306A

2800 Kgs. Lyngby

Ph.
Fax +4545 25 19 61
E-mail mais@mek.dtu.dk
ORCID 0000-0002-8275-6631
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2019
 

Comprehensive characterization and material modeling for ceramic injection molding simulation performance validations

Tosello, Guido ; Marhöfer, David Maximilian ; Islam, Aminul ; Müller, Tobias ; Plewa, Klaus ; Piotter, Volker
in: International Journal of Advanced Manufacturing Technology, vol: 102, pages: 225-240

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s00170-018-03251-3

 

Development of metal–graphene-filled hybrid composites: Characterization of mechanical, thermal, and electrical properties

Doagou Rad, Saeed ; Islam, Aminul ; Alnasser, Ammar
in: Journal of Composite Materials, vol: 53, issue: 24, pages: 3363–3376

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1177/0021998318812928

 

Investigation of conductive hybrid polymer composites reinforced with copper micro fibers and carbon nanotubes produced by injection molding

Doagou-Rad, Saeed ; Islam, Aminul ; Antusch, Steffen ; Jung, Judith ; Klein, Alexander ; Plewa, Klaus ; Piotter, Volker
in: Materials Today Communications, vol: 20

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.mtcomm.2019.100566

 

Multiscale molecular dynamics-FE modeling of polymeric nanocomposites reinforced with carbon nanotubes and graphene

Doagou-Rad, S. ; Jensen, J. S. ; Islam, A. ; Mishnaevsky Jr., Leon
in: Composite Structures, vol: 217, pages: 27-36

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.compstruct.2019.03.017

 

Process chains for the mass production of transparent crowns for posterior teeth

Islam, Aminul ; Hansen, Hans Nørgaard ; Rabenow, Lisa ; Nielsen, Keld
in: CIRP annals, vol: 68, issue: 1, pages: 591-594

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.cirp.2019.04.015

2018
  PDF

Correlation of mechanical and electrical properties with processing variables in MWCNT reinforced thermoplastic nanocomposites

Doagou-Rad, Saeed ; Islam, Aminul ; Jensen, Jakob Søndergaard
in: Journal of Composite Materials, vol: 52, issue: 26, pages: 3681–3697

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1177/0021998318768390

  PDF

Direct fabrication of bio-inspired gecko-like geometries with vat polymerization additive manufacturing method

Davoudinejad, A. ; M. Ribo, M. ; Pedersen, D. B. ; Islam, A. ; Tosello, G.
in: Journal of Micromechanics and Microengineering, vol: 28

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1088/1361-6439/aabf17

  PDF

Effect of process parameters on flow length and flash formation in injection moulding of high aspect ratio polymeric micro features

Eladl, Abdelkhalik ; Mostafa, Rania ; Islam, Aminul ; Loaldi, Dario ; Soltan, Hassan ; Hansen, Hans N. ; Tosello, Guido
in: Micromachines, vol: 9, issue: 2

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3390/mi9020058

  PDF

Interaction of nanofillers in injection-molded graphene/carbon nanotube reinforced PA66 hybrid nanocomposites

Doagou-Rad, Saeed ; Islam, Aminul ; Jensen, Jakob S. ; Alnasser, Ammar
in: Journal of Polymer Engineering, vol: 38, issue: 10, pages: 971-981

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1515/polyeng-2018-0060

  PDF

Systematic Analysis of the Effects of Moulding Conditions on the Properties of Shape Memory Polymers

Danielak, A. H. ; Islam, Aminul
in: A I P Conference Proceedings Series, vol: 2065
Presented at:
34th International Conference of the Polymer Processing Society

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1063/1.5088251