Yang Zhang

Yang Zhang

Senior Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 323B

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 48 70
E-mail yazh@mek.dtu.dk
ORCID 0000-0002-0883-8233
Home page

Request a vCard via e-mail.

Publications
Projects
Activities
Courses
Loading

Publications rss feed

2020
 

Influences of micro-ridges orientation and position on the replication of micro-structured surfaces by injection molding

Regi, Francesco ; Basso, Alberto ; Kain, Martin ; Loaldi, Dario ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
in: AIP Conference Proceedings, vol: 2205, issue: 1
Presented at:
35th International Conference of the Polymer Processing Society (PPS-35)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1063/1.5142928

 

Replication of micro-structured surfaces by integrating AM with PIM

Basso, Alberto ; Mendez Ribo, Macarena ; Christensen, Simon Emil ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
euspen's 20th International Conference & Exhibition

Type: Conference abstract for conference (Peer reviewed)

Status: Accepted/In press     |    Year: 2020

2019
  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 71-74, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Additive manufacturing of metal components – process-material interaction in different process chains

Hansen, H. N. ; Hattel, J. H. ; Pedersen, D. B. ; Mohanty, S. ; Andersen, S. A. ; Nadimpalli, V. K. ; Klingaa, C. G. ; Dahmen, T. ; Zhang, Y.
in: I O P Conference Series: Materials Science and Engineering, vol: 580, issue: 1
Presented at:
40th Risø International Symposium on Material Science: Metal Microstructures in 2D, 3D, and 4D

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1088/1757-899x/580/1/012006

  PDF

Breaking the Limit of Micro-Ductility in Oxide Glasses

Januchta, Kacper ; Stepniewska, Malwina ; Jensen, Lars Rosgaard ; Zhang, Yang ; Somers, Marcel A. J. ; Bauchy, Mathieu ; Yue, Yuanzheng ; Smedskjær, Morten Mattrup
in: Advanced Science, vol: 6, issue: 18

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1002/advs.201901281

  PDF

Experimental investigation and thermo-mechanical modelling for tool life evaluation of photopolymer additively manufactured mould inserts in different injection moulding conditions

Davoudinejad, Ali ; Bayat, Mohamad ; Pedersen, David Bue ; Zhang, Yang ; Hattel, Jesper Henri ; Tosello, Guido
in: International Journal of Advanced Manufacturing Technology, vol: 102, issue: 1-4, pages: 403–420

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s00170-018-3163-7

 

Functionality characterization of injection moulded micro-structured surfaces

Regi, Francesco ; Doest, Mads ; Loaldi, Dario ; Li, Dongya ; Frisvad, Jeppe Revall ; Tosello, Guido ; Zhang, Yang
in: Precision Engineering, vol: 60, pages: 594-601

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.precisioneng.2019.07.014

  PDF

Observation of Crack-Free Vickers Indents at 500 N in Annealed Caesium Aluminoborate Glass

Januchta, K. ; Stepniewska, M. ; Yue, Yuanzheng ; Jensen, L. ; Zhang, Yang ; Munch, Steffen S. ; Somers, Marcel A. J. ; Smedskjær, Morten Mattrup
Presented at:
25th International Congress on Glass

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Optimization of corner micro end milling by finite element modelling for machining thin features

Davoudinejad, Ali ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
in: Procedia CIRP, vol: 82, pages: 362-367
Presented at:
17th CIRP Conference on Modelling of Machining Operations

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.procir.2019.04.158

  PDF

Simulation of thin features machining by micro end-milling using finite element modelling

Davoudinejad, Ali ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 120-121, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Study of the Distribution of Rubber Particles in Ground Tire Rubber/Polypropylene Blends

Basso, Alberto ; Zhang, Yang
Presented at:
12th International Conference on Composite Science and Technology

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

2018
  PDF

A method for the characterization of the reflectance of anisotropic functional surfaces

Regi, Francesco ; Nielsen, J B ; Li, Dongya ; Zhang, Y ; Frisvad, Jeppe Revall ; Aanæs, Henrik ; Tosello, Guido
in: Surface Topography: Metrology and Properties, vol: 6, issue: 3

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1088/2051-672X/aac373

  PDF

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Zhang, Yang ; Pedersen, David Bue ; Mischkot, Michael ; Calaon, Matteo ; Baruffi, Federico ; Tosello, Guido
in: Journal of Visualized Experiments, vol: 138

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3791/57335

  PDF

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A. ; Charalambis, A. ; Zhang, Y. ; Calaon, M. ; Pedersen, D. B. ; Tosello, G. ; Hansen, H. N.
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, Ali ; Charalambis, Alessandro ; Tosello, Guido ; Zhang, Yang ; Calaon, Matteo ; Pedersen, David Bue ; Hansen, Hand Nørgaard
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 383-384 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

A study of laser surface modification of polymers: A comparison in air and water

Marla, Deepak ; Andersen, Sebastian A. ; Zhang, Yang ; Hattel, Jesper H. ; Spangenberg, Jon
in: Journal of Manufacturing Processes, vol: 32, pages: 432-437

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.jmapro.2018.03.005

  PDF

Comparison of selected processes for surface microstructuring of complex mould for an implanted device

Zhang, Yang ; Hansen, Hans Nørgaard ; Bissacco, Giuliano ; Biondani, Francesco Giuseppe
in: International Journal of Advanced Manufacturing Technology, vol: 97, issue: 5-8, pages: 2741-2748

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1007/s00170-018-2152-1

  PDF

Dimensional Accuracy and Repeatability of 3D Printed Mould Inserts by DLP

Thorn, S. ; Bertelsen, J. G. ; M. Ribo, M. ; Li, D. ; Regi, F. ; Davoudinejad, A. ; Zhang, Y.
Presented at:
Euspen Special Interest Group Meeting 2018: Structured & Freeform Surfaces

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Dimensional Accuracy and Repeatability of Mould Inserts Manufactured by Mask Projection Vat-Photopolymerization

Bertelsen, J. G. ; Thorn, S. ; M. Ribo, M. ; Li, D. ; Regi, F. ; Davoudinejad, A. ; Zhang, Y. ; Tosello, G.
Presented at:
Euspen Special Interest Group Meeting 2018: Structured & Freeform Surfaces

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Evaluation of an improved micro milling strategy for the generation of tool steel micro features with optical functionality

Li, D. ; Davoudinejad, A. ; Zhang, Y. ; Tosello, G.
Presented at:
2018 World Congress on Micro and Nano Manufacturing (WCMNM2018)

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Evaluation of part consistency with photopolymer inserts in different injection moulding process parameters

Davoudinejad, A. ; Charalambis, A. ; Zhang, Y. ; Calaon, M. ; Tosello, G. ; Hansen, H. N.
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Evaluation of part consistency with photopolymer inserts in different injection moulding process parameters

Davoudinejad, Ali ; Charalambis, Alessandro ; Zhang, Yang ; Calaon, Matteo ; Tosello, Guido ; Hansen, Hans Nørgaard
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 253-254 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Investigation of product and process fingerprints for fast quality assurance in injection molding of micro-structured components

Giannekas, Nikolaos ; Kristiansen, Per Magnus ; Zhang, Yang ; Tosello, Guido
in: Micromachines, vol: 9, issue: 12

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3390/mi9120661

  PDF

Investigation on Product and Process Fingerprints for Integrated Quality Assurance in Injection Molding of Microstructured Biochips

Giannekas, Nikolaos ; Zhang, Yang ; Tosello, Guido
in: Journal of Manufacturing and Materials Processing, vol: 2, issue: 4

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.3390/jmmp2040079

 

Modeling of nanosecond pulsed laser processing of polymers in air and water

Marla, Deepak ; Zhang, Yang ; Hattel, Jesper H. ; Spangenberg, Jon
in: Modelling and Simulation in Materials Science and Engineering, vol: 26, issue: 5

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1088/1361-651X/aabea0

  PDF

On the effect of machining strategy in micro milling of tool steel surface micro features with optical functionality

Li, D. ; Davoudinejad, A. ; Regi, F. ; Zhang, Y. ; Tosello, G.
Presented at:
Euspen Special Interest Group Meeting 2018: Structured & Freeform Surfaces

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Pitch measurements validation of a structural coloured steel insert using Scanning Confocal Microscopy (SCM) and Atomic Force Microscopy (AFM)

Loaldi, Dario ; Zhang, Yang ; Calaon, Matteo ; Yang, Yang ; Guochin, Ping ; Garnæs, Jørgen ; Tosello, Guido
part of: Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology , pages: 497-498 , 2018, The European Society for Precision Engineering and Nanotechnology
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Pitch measurements validation of steel inserts micro‐grooves with light diffractive properties using a Laser Scanning Confocal Microscope (LSCM) and an Atomic Force Microscope (AFM)

Loaldi, Dario ; Zhang, Yang ; Calaon, Matteo ; Yang, Yang  ; Guo, Ping ; Garnæs, Jørgen ; Tosello, Guido
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018

2017
  PDF

A comparison of reflectance properties on polymer micro-structured functional surface

Regi, Francesco ; Li, Dongya ; Nielsen, Jannik Boll ; Zhang, Yang ; Tosello, Guido ; Madsen, M. H. ; Frisvad, Jeppe Revall ; Aanæs, Henrik
Presented at:
euspen’s 17th International Conference & Exhibition

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

A preliminary study on replication and quality correlation of on-part and on-runner polymer injection moulded micro features

Giannekas, Nikolaos ; Tosello, Guido ; Zhang, Yang
Presented at:
Polymer Replication on Nanoscale 2017

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

A Soft Tooling process chain employing Additive Manufacturing for injection molding of a 3D component with micro pillars

Zhang, Yang ; Pedersen, David Bue ; Segebrecht Gøtje, Asger ; Mischkot, Michael
in: Journal of Manufacturing Processes, vol: 27, pages: 138–144

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1016/j.jmapro.2017.04.027

  PDF

A study on replication and quality correlation of on-part and on-runner polymer injection molded micro features

Giannekas, Nikolaos ; Tosello, Guido ; Zhang, Yang
Presented at:
2017 World Congress on Micro and Nano Manufacturing (WCMNM 2017)

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2017

 

Evaluation of optical functional surfaces on the injection moulding insert by micro milling process

Li, Dongya ; Davoudinejad, Ali ; Zhang, Yang ; Regi, Francesco ; Tosello, Guido ; Nielsen, Jannik Boll ; Aanæs, Henrik ; Frisvad, Jeppe Revall
part of: Proceedings of the euspen Special Interest Group Meeting, 2017, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen Special Interest Group Meeting: Micro/Nano Manufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

Influence of Injection-Molding Process Parameters on Part Replication of Microstructures with Additively-Manufactured Soft Tooling Inserts WCMNM 2017 No.

Mischkot, Michael ; Zhang, Yang ; Segebrecht Gøtje, Asger ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
Presented at:
2017 World Congress on Micro and Nano Manufacturing (WCMNM 2017)

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2017

 

Injection Moulding Pilot Production: Performance Assessment of Tooling Process Chains Based on Tool Inserts Made from Brass and A 3d Printed Photopolymer

Mischkot, Michael ; Tosello, Guido ; Nielsen, Daniel K. Y. ; Pedersen, David Bue ; Zhang, Yang ; Hofstätter, Thomas ; Herbin, Lucas ; Hansen, Hans Nørgaard
part of: Proceedings of ANTEC 2017, 2017, Society of Plastics Engineers
Presented at:
ANTEC 2017

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

Investigation of Tooling for Anisotropic Optical Functional Surfaces

Li, Dongya ; Regi, Francesco ; Zhang, Yang ; Madsen, M. H. ; Nielsen, Jannik Boll ; Tosello, Guido
Presented at:
16th International Conference on Metrology and Properties of Engineering Surfaces (Met&Props 2017)

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

Modeling the Anisotropic Reflectance of a Surface with Microstructure Engineered to Obtain Visible Contrast after Rotation

Luongo, Andrea ; Falster, Viggo ; Doest, Mads Emil Brix ; Li, Dongya ; Regi, Francesco ; Zhang, Yang ; Tosello, Guido ; Nielsen, Jannik Boll ; Aanæs, Henrik ; Frisvad, Jeppe Revall
part of: Proceedings of the ICCV 2017 International Conference on Computer Vision, pages: 159-165, 2018, IEEE
Presented at:
ICCV 2017 International Conference on Computer Vision

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1109/ICCVW.2017.27

 

Process chain for fabrication of anisotropic optical functional surfaces on polymer components

Li, Dongya ; Zhang, Yang ; Regi, Francesco ; Tosello, Guido ; Madsen, M. H. ; Nielsen, Jannik Boll ; Aanæs, Henrik ; Frisvad, Jeppe Revall
part of: Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 305-306, 2017, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen’s 17th International Conference & Exhibition

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

The impact of tool wear on the functionality of replicated polymer surface with micro structures

Li, Dongya ; Zhang, Yang ; Regi, Francesco ; Tosello, Guido ; Nielsen, Jannik Boll
Presented at:
Polymer Replication on Nanoscale: 4th International Conference

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2017

  PDF

Tolerances in micro manufacturing

Hansen, Hans Nørgaard ; Zhang, Yang ; Islam, Aminul
Presented at:
2017 World Congress on Micro and Nano Manufacturing (WCMNM 2017)

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2017

2016
 

Adaptive Layer Height During DLP Materials Processing

Pedersen, David Bue ; Zhang, Yang ; Nielsen, Jakob Skov ; Hansen, Hans Nørgaard
part of: Proceedings of the 2nd International Conference on Progress in Additive Manufacturing, pages: 246-251, 2016, Research Publishing Services
Presented at:
2nd International Conference on Progress in Additive Manufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

 

A Self-Peeling Vat for Improved Release Capabilities During DLP Materials Processing

Pedersen, David Bue ; Zhang, Yang ; Nielsen, Jakob Skov ; Hansen, Hans Nørgaard
part of: Proceedings of the 2nd International Conference on Progress in Additive Manufacturing, pages: 241-245, 2016, Research Publishing Services
Presented at:
2nd International Conference on Progress in Additive Manufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

  PDF

Improvement in Surface Characterisitcs of Polymers for Subsequent Electroless Plating Using Liquid Assisted Laser Processing

Marla, Deepak ; Zhang, Yang ; Jabbaribehnam, Mirmasoud ; Sonne, Mads Rostgaard ; Spangenberg, Jon ; Hattel, Jesper Henri
in: Physics Procedia, vol: 83, pages: 211-217
Presented at:
9th International Conference on Photonic Technologies (LANE 2016)

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2016     |    DOI: https://doi.org/10.1016/j.phpro.2016.08.011

  PDF

Injection molding of micro pillars on vertical side walls using polyether-ether-ketone (PEEK)

Zhang, Yang ; Hansen, Hans Nørgaard ; Sørensen, Søren
part of: Proceedings. 11th International Conference on Micro Manufacturing, 2016
Presented at:
11th International Conference on Micro Manufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

  PDF

Two process chains for creating functional surfaces on mold for 3D geometry

Zhang, Yang ; Hansen, Hans Nørgaard ; Pedersen, David Bue ; Tosello, Guido
Presented at:
Euspen Special Interest Group Meeting 2016: Structured & Freeform Surfaces

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2016

2015
 

Application of Functional Nano-Patterning to Polymer Medical Micro Implants

Bissacco, Giuliano ; Biondani, Francesco Giuseppe ; Tang, P.T. ; Mischkot, Michael ; Hansen, Hans Nørgaard ; Zhang, Yang ; Ravn, Christian
part of: Proceedings of the 4M/ICOMM2015 Conference, 2015, Research Publishing Services
Presented at:
4M/ICOMM2015 Conference

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.3850/978-981-09-4609-8_118

 

Comparison of 3 methods on fabricating micro- /nano- structured surface on 3D mold cavity

Zhang, Yang ; Hansen, Hans Nørgaard ; Bissacco, Giuliano ; Biondani, Francesco Giuseppe
part of: Proceedings of Euspen's 15th International Conference & Exhibition, 2015
Presented at:
15th International Conference of the European Society for Precision Engineering and Nanotechnology

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2015

 

Replication of Micro pillars by PEEK injection moulding with CrN coated Ni tool

Zhang, Yang ; Hansen, Hans Nørgaard ; Sørensen, Søren
in: International Journal of Advanced Manufacturing Technology, vol: 80, issue: 1, pages: 383-388

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: https://doi.org/10.1007/s00170-015-6991-8

  PDF

Replication of microstructures on three-dimensional geometries by injection moulding of liquid silicone rubber

Zhang, Yang ; Mischkot, Michael ; Hansen, Hans Nørgaard ; Hansen, Poul-Erik
part of: Proceedings of the 15th International Conference on Metrology and Properties of Engineering Surfaces, ASPE, 2015, American Society for Precision Engineering
Presented at:
15th International Conference on Metrology and Properties of Engineering Surfaces

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2015

2014
 

Replication of micro structured surface by injection moulding of PEEK

Zhang, Yang ; Hansen, Hans Nørgaard ; Sørensen, Søren
Presented at:
Euspen Special Interest Group Meeting - Structured and Freeform Surfaces

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2014

2013
 

An explanation of the mechanism for laser induced selective activation using diffusion theory

Zhang, Yang ; Hansen, Hans Nørgaard ; Hattel, Jesper Henri ; Tang, Peter Torben ; Nielsen, Jakob Skov ; Tutum, Cem Celal
in: Nami Jishu yu Jingmi Gongcheng, vol: 11, issue: 2, pages: 97-104

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013

  PDF

Dimensional verification of high aspect micro structures using FIB-SEM

Zhang, Yang ; Hansen, Hans Nørgaard
part of: Proceedings of the 13th euspen International Conference, 2014
Presented at:
13th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2013

  PDF

Dimensional verification of high aspect ratio micro structures using FIB-SEM

Zhang, Yang ; Hansen, Hans Nørgaard
Presented at:
13th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen)

Type: Poster

Status: Published     |    Year: 2013

 

Verification of a characterization method of the laser-induced selective activation based on industrial lasers

Zhang, Yang ; Hansen, Hans Nørgaard ; Tang, Peter T. ; Nielsen, Jakob Skov
in: International Journal of Advanced Manufacturing Technology, vol: 68, pages: 1775–1783

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2013     |    DOI: https://doi.org/10.1007/s00170-013-4975-0

2011
 

An Explanation of the Selective Plating of Laser Machined Surfaces using Surface Tension Components

Zhang, Yang ; Kontogeorgis, Georgios ; Hansen, Hans Nørgaard
in: Journal of Adhesion Science and Technology, vol: 25, pages: 2101-2111

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2011     |    DOI: https://doi.org/10.1163/016942410X550021

 

Selective metallization of polymers using laser induced surface activation (LISA)—characterization and optimization of porous surface topography

Zhang, Yang ; Hansen, Hans Nørgaard ; De Grave, Arnaud ; Tang, Peter Torben ; Nielsen, Jacob S.
in: International Journal of Advanced Manufacturing Technology, vol: 55, issue: 5-8, pages: 573-580

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2011     |    DOI: https://doi.org/10.1007/s00170-010-3051-2

2010
 

Characterization of Laser Machined Polymer Surface Using Bearing Area Curve Parameters for Future Plating

Zhang, Yang ; Hansen, Hans Nørgaard ; De Grave, Arnaud ; Tang, Peter Torben ; Nielsen, Jakob Skov
part of: ICOMM/4M2010, 2010
Presented at:
5th International Conference on MicroManufacturing

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2010

 

Electroless Plating on Plastic Induced by Selective Laser Activation

Zhang, Yang ; Tang, Peter Torben ; Hansen, Hans Nørgaard ; Nielsen, Jakob Skov
in: Plating and Surface Finishing, vol: 97, issue: 2, pages: 43-47
Presented at:
Sur Fin 2009

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2010

  PDF

Laser Induced Selective Activation For Subsequent Autocatalytic Electroless Plating

Zhang, Yang

Type: Ph.D. thesis

Status: Published     |    Year: 2010

2009
  PDF

Electroless Plating on Plastic Induced by Selective Laser Activation

Zhang, Yang ; Tang, Peter Torben ; Hansen, Hans Nørgaard ; Nielsen, Jakob Skov
part of: Electroless Plating on Plastic Induced by Selective Laser Activation, 2009
Presented at:
Electroless Plating on Plastic Induced by Selective Laser Activation

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2009

 

LASER INDUCED SELECTIVE ACTIVATION UTILIZING AUTO-CATALYTIC ELECTROLESS PLATING ON POLYMER SURFACE

Zhang, Yang ; Nielsen, Jakob Skov ; Tang, Peter Torben ; Hansen, Hans Nørgaard
part of: LASER INDUCED SELECTIVE ACTIVATION UTILIZING AUTO-CATALYTIC ELECTROLESS PLATING ON POLYMER SURFACE, 2009
Presented at:
LASER INDUCED SELECTIVE ACTIVATION UTILIZING AUTO-CATALYTIC ELECTROLESS PLATING ON POLYMER SURFACE

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2009

2008
 

Laser induced selective activation utilizing auto-catalytic electroless plating on polymer surfaces

Zhang, Yang ; Tang, Peter Torben ; Nielsen, Jakob Skov ; Hansen, Hans Nørgaard
part of: Proc. 8th International Congress on Molded Interconnect Devices, 2008
Presented at:
8. International Congress on Molded Interconnect Devices

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2008