Sankhya Mohanty

Sankhya Mohanty

Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 217

2800 Kgs. Lyngby

Ph.
Mobile
Fax +45 45 25 19 61
E-mail samoh@mek.dtu.dk
ORCID 0000-0002-1142-0989
Home page

Request a vCard via e-mail.

Publications
Projects
DTU news
Loading

Publications rss feed

2019
 

A systematic investigation of the effects of process parameters on heat and fluid flow and metallurgical conditions during laser-based powder bed fusion of Ti6Al4V alloy

Bayat, Mohamad ; Mohanty, Sankhya ; Hattel, Jesper Henri
in: International Journal of Heat and Mass Transfer, vol: 139, pages: 213-230

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.05.017

 

Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF

Bayat, Mohamad ; Mohanty, Sankhya ; Hattel, Jesper Henri
in: International Journal of Heat and Mass Transfer, vol: 139, pages: 95-114

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.05.003

  PDF

Roughness Investigation of SLM Manufactured Conformal Cooling Channels Using X-ray Computed Tomography

Klingaa, Christopher G. ; Bjerre, Mathias K. ; Baier, Sina ; De Chiffre, Leonardo ; Mohanty, Sankhya ; Hattel, Jesper H.
part of: Proceedings of the 9th Conference on Industrial Computed Tomography, Padova, Italy (iCT 2019), 2019
Presented at:
9th Conference on Industrial Computed Tomography (ICT2019)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

2018
  PDF

A new design for an extensive benchmarking of additive manufacturing machines

Moshiri, Mandaná ; Tosello, Guido ; Mohanty, Sankhya
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2018

 

Defects investigation in additively manufactured steel products for injection moulding

Moshiri, Mandaná ; Tosello, Guido ; Mohanty, Sankhya
part of: Euro PM2018 Proceedings , 2019, European Powder Metallurgy Association
Presented at:
EURO PM2018

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

 

Humidity build-up in electronic enclosures exposed to different geographical locations by RC modelling and reliability prediction

Conseil-Gudla, H. ; Staliulionis, Z. ; Mohanty, S. ; Jellesen, M. S. ; Hattel, J. H. ; Ambat, R.
in: Microelectronics Reliability, vol: 82, pages: 136-146

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1016/j.microrel.2018.01.013

 

Modeling of Moisture Transport into an Electronic Enclosure Using the Resistor-Capacitor Approach

Staliulionis, Z. ; Conseil-Gudla, H. ; Mohanty, S. ; Jabbari, M. ; Ambat, R. ; Hattel, J. H.
in: Journal of Electronic Packaging, vol: 140, issue: 3

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1115/1.4039790

  PDF

Modelling of the microstructural evolution of Ti6Al4V parts produced by selective laser melting during heat treatment

De Baere, David ; Valente, Emilie Hørdum ; Mohanty, Sankhya ; Hattel, Jesper Henry
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18)

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Multiphysics modelling of manufacturing processes: A review

Jabbari, Masoud ; Baran, Ismet ; Mohanty, Sankhya ; Comminal, Raphaël ; Sonne, Mads Rostgaard ; Nielsen, Michael Wenani ; Spangenberg, Jon ; Hattel, Jesper Henri
in: Advances in Mechanical Engineering, vol: 10, issue: 5, pages: 1-31

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: https://doi.org/10.1177/1687814018766188

  PDF

Multi-Scale Multiphysics Simulation of Metal L-PBF AM Process and Subsequent Mechanical Analysis

Bayat, M. ; De Baere, D. ; Mohanty, S. ; Hattel, J. H.
Presented at:
12th International Seminar of Numerical Analysis of Weldability

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018