Sankhya Mohanty

Sankhya Mohanty

Forsker

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Proces- og Produktionsteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 425, rum 217

2800 Kgs. Lyngby

Tlf.
Mobil
Fax 45 25 19 61
E-mail samoh@mek.dtu.dk
ORCID 0000-0002-1142-0989
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
DTU nyheder
Loading

Publikationer rss feed

2020
 

Multi-metal additive manufacturing process chain for optical quality mold generation

Biondani, F.G. ; Bissacco, G. ; Mohanty, S. ; Tang, P. T. ; Hansen, Hans Nørgaard
in: Journal of Materials Processing Technology, vol: 277

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.jmatprotec.2019.116451

2019
 

A systematic investigation of the effects of process parameters on heat and fluid flow and metallurgical conditions during laser-based powder bed fusion of Ti6Al4V alloy

Bayat, Mohamad ; Mohanty, Sankhya ; Hattel, Jesper Henri
in: International Journal of Heat and Mass Transfer, vol: 139, pages: 213-230

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.05.017

  PDF

Benchmarking of Laser Powder Bed Fusion Machines

Moshiri, Mandaná ; Candeo, Stefano ; Carmignato, Simone ; Mohanty, Sankhya ; Tosello, Guido
in: Journal of Manufacturing and Materials Processing, vol: 2019, issue: 3

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.3390/jmmp3040085

  PDF

Build orientation effects on the roughness of SLM channels

Klingaa, C. G. ; Dahmen, T. ; Baier, S. ; Mohanty, S. ; Hattel, J. H.
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

  PDF

Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation

Bayat, Mohamad ; Thanki, Aditi ; Mohanty, Sankhya ; Witvrouw, Ann ; Yang, Shoufeng ; Thorborg, Jesper ; Skat Tiedje, Niels ; Hattel, Jesper Henri
in: Additive Manufacturing

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.100835

  PDF

Multi-material additive manufacturing of steels using laser powder bed fusion

Nadimpalli, Venkata Karthik ; Dahmen, Thomas ; Valente, Emilie Hørdum ; Mohanty, Sankhya ; Pedersen, David Bue
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 240-243, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

 

Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF

Bayat, Mohamad ; Mohanty, Sankhya ; Hattel, Jesper Henri
in: International Journal of Heat and Mass Transfer, vol: 139, pages: 95-114

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.05.003

 

Resistor-capacitor approach for modelling of temperature and humidity response inside electronic enclosures

Staliulionis, Z. ; Mohanty, S. ; Hattel, J. H.
part of: 2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2019), 2019, IEEE
Presented at:
20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1109/EuroSimE.2019.8724538

  PDF

Roughness Investigation of SLM Manufactured Conformal Cooling Channels Using X-ray Computed Tomography

Klingaa, Christopher G. ; Bjerre, Mathias K. ; Baier, Sina ; De Chiffre, Leonardo ; Mohanty, Sankhya ; Hattel, Jesper H.
part of: Proceedings of the 9th Conference on Industrial Computed Tomography, Padova, Italy (iCT 2019), 2019
Presented at:
9th Conference on Industrial Computed Tomography (ICT2019)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2019